1 – 66 of 66
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Tribology and airborne particle emissions from grey cast iron and WC reinforced laser cladded brake discs
(
- Contribution to journal › Article
-
Mark
Pin-on-disc tribological characterization of single ingredients used in a brake pad friction material
(
- Contribution to journal › Article
- 2023
-
Mark
Characterization of ultrafine particles from hardfacing coated brake rotors
(
- Contribution to journal › Article
-
Mark
Nanoparticle emissions from the transport sector : Health and policy impacts - the nPETS concept
2023) 2022 Conference Proceedings Transport Research Arena, TRA Lisbon 2022 In Transportation Research Procedia 72. p.248-255(
- Contribution to journal › Article
-
Mark
Ultrafine particle emissions from dry clutches : number concentration, size distribution and chemical composition
2023) In Environmental Science: Atmospheres(
- Contribution to journal › Article
-
Mark
A multi-perspective method for gear efficiency and contact analysis
(
- Contribution to journal › Article
-
Mark
On the impact of pad material ingredients on particulate wear emissions from disc brakes
(
- Contribution to journal › Article
-
Mark
A novel approach for brake emission estimation based on traffic microsimulation, vehicle system dynamics, and machine learning modeling
(
- Contribution to journal › Article
- 2022
-
Mark
An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles
(
- Contribution to journal › Article
-
Mark
A Brake System Coefficient of Friction Estimation Using 3D Friction Maps
(
- Contribution to journal › Article
-
Mark
Simulation of thermal and mechanical performance of laser cladded disc brake rotors
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(1). p.3-14(
- Contribution to journal › Article
-
Mark
Reducing scrapping of gears by assessment of tip contact threshold torque
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(8). p.1613-1622(
- Contribution to journal › Article
-
Mark
A Mesoscopic Simulation Approach Based on Metal Fibre Characterization Data to Evaluate Brake Friction Performance
(
- Contribution to journal › Article
-
Mark
Influence of Manufacturing Error Tolerances on Thermal EHL Behavior of Gears
(
- Contribution to journal › Article
-
Mark
Airborne Wear Particles from Dry Clutches
(
- Contribution to journal › Article
- 2021
-
Mark
Influence of manufacturing error tolerances on contact pressure in gears
2021) In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235(20). p.5173-5185(
- Contribution to journal › Article
-
Mark
Gear tolerancing for simultaneous optimization of transmission error and contact pressure
(
- Contribution to journal › Article
-
Mark
A finite element analysis (FEA) approach to simulate the coefficient of friction of a brake system starting from material friction characterization
(
- Contribution to journal › Article
-
Mark
Tribology and airborne particle emission of laser-cladded fe-based coatings versus non-asbestos organic and low-metallic brake materials
(
- Contribution to journal › Article
-
Mark
Input parameters for airborne brake wear emission simulations : A comprehensive review
(
- Contribution to journal › Article
-
Mark
Laser Cladding Treatment for Refurbishing Disc Brake Rotors : Environmental and Tribological Analysis
(
- Contribution to journal › Article
- 2020
-
Mark
A Comparison of Airborne Particles Generated from Disk Brake Contacts : Induction Versus Frictional Heating
(
- Contribution to journal › Article
-
Mark
Friction, wear and airborne particle emission from Cu-free brake materials
(
- Contribution to journal › Article
-
Mark
A proposed driving cycle for brake emissions investigation for test stand
2020) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 234(1). p.122-135(
- Contribution to journal › Article
-
Mark
Special issue editorial : Study of brake wear particle emissions
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Airborne wear particle emissions produced during the dyno bench tests with a slag containing semi-metallic brake pads
(
- Contribution to journal › Article
-
Mark
A study of the effect of brake pad scorching on tribology and airborne particle emissions
(
- Contribution to journal › Article
-
Mark
Recycling of worn out brake pads ‒ impact on tribology and environment
(
- Contribution to journal › Article
- 2019
-
Mark
A pin-on-disc tribometer study of friction at low contact pressures and sliding speeds for a disc brake material combination
(
- Contribution to journal › Article
-
Mark
A multi-scale simulation approach to investigate local contact temperatures for commercial Cu-full and Cu-free brake pads
(
- Contribution to journal › Article
-
Mark
A test stand study on the volatile emissions of a passenger car brake assembly
(
- Contribution to journal › Article
-
Mark
An FEA approach to simulate disc brake wear and airborne particle emissions
(
- Contribution to journal › Article
-
Mark
Simulation of contact area and pressure dependence of initial surface roughness for cermet-coated discs used in disc brakes
(
- Contribution to journal › Article
-
Mark
A pin-on-disc study on the tribology of cast iron, sinter and composite railway brake blocks at low temperatures
(
- Contribution to journal › Article
-
Mark
Towards a two-part train traffic emissions factor model for airborne wear particles
(
- Contribution to journal › Article
-
Mark
A comparison of airborne wear particle emission models based on metro station measurements
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Eco Design of Brake Pads with Recycled Friction Materials
2019) Eurobrake 2019(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A PIN-ON-DISC STUDY ON THE FRICTION, WEAR AND AIRBORNE PARTICLE EMISSION FROM RECYCLED BRAKE PAD MATERIAL
2019) Eurobrake 2019(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2018
-
Mark
A friction, wear and emission tribometer study of non-asbestos organic pins sliding against alsic mmc discs
(
- Contribution to journal › Article
-
Mark
Scaling effects of measuring disc brake airborne particulate matter emissions – A comparison of a pin-on-disc tribometer and an inertia dynamometer bench under dragging conditions
2018) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 232(12). p.1538-1547(
- Contribution to journal › Article
-
Mark
On the influence of car brake system parameters on particulate matter emissions
(
- Contribution to journal › Article
-
Mark
A concept for reducing PM10 emissions for car brakes by 50%
(
- Contribution to journal › Article
-
Mark
A numerical study of disc brake wear dependence of rotor surface parameters
2018) EUROBRAKE 2018(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2017
-
Mark
Contact pressure and sliding velocity maps of the friction, wear and emission from a low-metallic/cast-iron disc brake contact pair
(
- Contribution to journal › Article
-
Mark
On the running-in of brake pads and discs for dyno bench tests
(
- Contribution to journal › Article
-
Mark
A pin-on-disc tribometer study of disc brake contact pairs with respect to wear and airborne particle emissions
(
- Contribution to journal › Article
-
Mark
Towards the ranking of airborne particle emissions from car brakes - A system approach
2017) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 231(6). p.781-797(
- Contribution to journal › Article
-
Mark
Ranking of conventional and novel disc brake materials with respect to airborne particle emissions
2017)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A CFD study of a pin-on-disc tribometer setup focusing on airborne particle sampling efficiency
2017) 6th European Conderence on Tribology, ECOTRIB 2017(
- Contribution to conference › Abstract
- 2016
-
Mark
A Factorial Design to Numerically Study the Effects of Brake Pad Properties on Friction and Wear Emissions
(
- Contribution to journal › Article
-
Mark
Towards a test stand for standardized measurements of the brake emissions
2016) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 230(11). p.1521-1528(
- Contribution to journal › Article
-
Mark
Could pin-on-disc tribometers be used to study the friction/wear performance of disc brake materials?
2016) EUROBRAKE 2016(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
A comparison of measured and simulated friction, wear, and particle emission of disc brakes
(
- Contribution to journal › Article
-
Mark
A field study of airborne particle emissions from automotive disc brakes
2015) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 229(6). p.747-757(
- Contribution to journal › Article
- 2014
-
Mark
Towards a cellular automaton to simulate friction, wear, and particle emission of disc brakes
(
- Contribution to journal › Article
- 2012
-
Mark
A pin-on-disc study focusing on how different load levels affect the concentration and size distribution of airborne wear particles from the disc brake materials
(
- Contribution to journal › Article
- 2011
-
Mark
The tribological efficiency and the mechanism of action of nano-porous composition base brake lining materials
2011) 1st International Congress on Advances in Applied Physics and Materials Science, APMAS2011 In AIP Conference Proceedings 1400. p.546-554(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A study of airborne wear particles generated from organic railway brake pads and brake discs
(
- Contribution to journal › Article
-
Mark
A pin-on-disc investigation of novel nanoporous composite-based and conventional brake pad materials focussing on airborne wear particles
(
- Contribution to journal › Article
-
Mark
A cellular automaton approach to numerically simulate the contact situation in disc brakes
(
- Contribution to journal › Article
- 2010
-
Mark
Ultrafine particle formation from wear
(
- Contribution to journal › Article
-
Mark
Size, shape, and elemental composition of airborne wear particles from disc brake materials
(
- Contribution to journal › Article
-
Mark
Airborne wear particles from passenger car disc brakes : A comparison of measurements from field tests, a disc brake assembly test stand, and a pin-on-disc machine
2010) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224(2). p.179-188(
- Contribution to journal › Article
-
Mark
A pin-on-disc simulation of airborne wear particles from disc brakes
(
- Contribution to journal › Article
- 2009
-
Mark
Simulation of airborne wear particles from disc brakes
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A disc brake test stand for measurement of airborne wear particles
(
- Contribution to journal › Article