1 – 153 of 153
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Effect of the sample width and concurrent airflow velocity on heat and mass transfer behaviors in steady flame spread stage
(
- Contribution to journal › Article
- 2023
-
Mark
Geometrical and environmental effect on fire behaviour of polyurethane foam slabs
(
- Contribution to journal › Article
-
Mark
Closing Data Gaps and Paving the Way for Pan-European Fire Safety Efforts : Part I—Overview of Current Practices for Fire Statistics
(
- Contribution to journal › Article
-
Mark
A comparison of carbon monoxide yields and particle formation at various global equivalence ratios in vitiated and under-ventilated conditions
(
- Contribution to journal › Article
-
Mark
Experimental Assessment of Emission Factors from Fires in the Built Environment Including Scaling Effects
2023) In Fire Technology(
- Contribution to journal › Article
- 2022
-
Mark
Evaluating Data and Voice Signals in Pathway Survivable Cables for Life Safety Systems
2022)(
- Book/Report › Report
-
Mark
The effect of oxygen concentration on selected industrial products in the open controlled atmosphere cone calorimeter
(
- Contribution to journal › Article
-
Mark
EUFireStat Project - Final report
2022)(
- Book/Report › Report
-
Mark
Flame heights and charring on a particle board – An experimental study
(
- Contribution to journal › Article
-
Mark
Burning material behaviour in hypoxic environments : An experimental study examining a representative storage arrangement of acrylonitrile butadiene styrene, polyethylene bubble wrap, and cardboard layers as a composite system
(
- Contribution to journal › Article
-
Mark
Biomass burning emissions and influence of combustion variables in the cone-calorimeter
(
- Contribution to conference › Abstract
- 2021
-
Mark
Flame retardancy of rigid polyurethane foams containing thermoregulating microcapsules with phosphazene-based monomers
(
- Contribution to journal › Article
-
Mark
Identification and characterization of design fires and particle emissions to be used in performance-based fire design of nuclear facilities
(
- Contribution to journal › Article
-
Mark
Experimental study and analysis of radiation heat fluxes received by a floor beneath an inclined ceiling
(
- Contribution to journal › Article
-
Mark
Experimental study of flame spread over thermally-thin inclined fuel surface and controlling heat transfer mechanism under concurrent wind
(
- Contribution to journal › Article
-
Mark
Fire behavior of sandwich panels
2021) p.157-171(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
A holistic framework for development and assessment of risk-informed performance-based building regulation
(
- Contribution to journal › Article
-
Mark
Experimental investigation into the influence of ignition location on flame spread and heat release rates of polyurethane foam slabs
(
- Contribution to journal › Article
-
Mark
Using Micro-Scale and Solid Material Data for Modelling Heat Transfer in Stone Wool Composites Under Heat Exposures
(
- Contribution to journal › Scientific review
- 2020
-
Mark
ANLAGD BRAND i skolor och förskolor : Trender och uppföljning av åtgärder
2020) In TVBB(
- Book/Report › Report
-
Mark
Critical longitudinal ventilation velocity for smoke control in a tunnel induced by two nearby fires of various distances : Experiments and a revisited model
(
- Contribution to journal › Article
- 2019
-
Mark
Performance analysis of a heat transfer and sub-grid chemical reaction distributed activation energy model for fire simulations
(
- Contribution to journal › Article
-
Mark
Analysis of extinction and sustained ignition
(
- Contribution to journal › Article
-
Mark
Experimental assessment of bench-scale ignitability parameters
(
- Contribution to journal › Article
-
Mark
IAFSS agenda 2030 for a fire safe world
(
- Contribution to journal › Article
-
Mark
Arson in Swedish Schools : A Societal Problem on the Rise
2019) 15th International Conference and Exhibitionon Fire Science and Engineering, Interflam 2019(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical study of a fire-driven flow in a narrow cavity
(
- Contribution to journal › Article
-
Mark
Fire-induced radiological integrated assessment : aerosol characterization
2019)(
- Book/Report › Report
-
Mark
Fire-Induced Radiological Integrated Assessment : Fire properties of selected materials and products
2019)(
- Book/Report › Report
-
Mark
Fire-Induced Radiological Integrated Assessment : Fire properties of selected materials and products in reduce oxygen conditions
2019)(
- Book/Report › Report
- 2018
-
Mark
Flame Heights and Heat Transfer in Façade System Ventilation Cavities
(
- Contribution to journal › Article
-
Mark
Characterization of stone wool properties for fire safety engineering calculations
(
- Contribution to journal › Article
-
Mark
Heat release and flame spread assessment of insulation in External Thermal Insulation Composite System (ETICS) facades
2018) 3rd European Symposium on Fire Safety Science, ESFSS 2018 In Journal of Physics: Conference Series 1107.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Proceedings of the 3rd European Symposium on Fire Safety Science
2018) 3rd European Symposium on Fire Safety Science, ESFSS 2018 In Journal of Physics: Conference Series 1107.(
- Chapter in Book/Report/Conference proceeding › Preface to conference proceeding
-
Mark
Response of stone wool–insulated building barriers under severe heating exposures
(
- Contribution to journal › Article
-
Mark
Sensitivity analysis on the microscale combustion calorimeter for polyurethane foam using a full factorial design methodology
(
- Contribution to journal › Article
-
Mark
Editorial façade fire safety
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Levoglucosan as a Tracer for Smouldering Fire
(
- Contribution to journal › Article
- 2017
-
Mark
A review on prediction models for full-scale fire behaviour of building products
(
- Contribution to journal › Article
-
Mark
Evaluating methods for preventing smoke spread through ventilation systems using fire dynamics simulator
(
- Contribution to journal › Article
-
Mark
Pyrolysis modeling of pvcusing distributed activation energy model-micro scale testing
2017) 2015 International Conference on Applications of Structural Fire Engineering, ASFE 2015 In Applications of Structural Fire Engineering(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Fire testing of aerosols and propane bottles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental analysis of stone wool sandwich composites exposed to constant incident heat fluxes and simulated parametric fires
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis of fire barriers with respect to fires with combustible gases and liquids
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental and numerical investigation on fire behaviour of foam/fabric composites
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The effectiveness of specific fire prevention measures for different population groups
(
- Contribution to journal › Article
-
Mark
Uncertainties in modelling heat transfer in fire resistance tests : A case study of stone wool sandwich panels
(
- Contribution to journal › Article
-
Mark
Study of ignition and extinction of small-scale fires in experiments with an emulating gas burner
(
- Contribution to journal › Article
- 2016
-
Mark
How could the fire fatalities have been prevented? An analysis of 144 cases during 2011-2014 in Sweden : An analysis
(
- Contribution to journal › Article
-
Mark
Development of full-scale façade tests in ISO TC92
(
- Contribution to journal › Article
-
Mark
Implementation and validation of an environmental feedback pool fire model based on oxygen depletion and radiative feedback in FDS
(
- Contribution to journal › Article
-
Mark
Pyrolysis modeling of PVC and PMMA using a distributed reactivity model
(
- Contribution to journal › Article
-
Mark
Influence of the built environment on design fires
(
- Contribution to journal › Article
-
Mark
Fire Behaviour of Less-Combustible Dielectric Liquids in a Nuclear Facility
(
- Contribution to journal › Article
-
Mark
A case study of fires in structural elements
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Mechanical properties of gypsum plasterboards exposed to standard fires
2016) Interflam’16, 14th International Conference and Exhibition on Fire Science and Engineering, London, UK, 4- 6th July 2016 p.1051-1062(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Distributed Reactivity Model to Predict Multistage Pyrolysis of Polymeric Materials and Sensitivity Analysis
2016) Interflam’16, 14th International Conference and Exhibition on Fire Science and Engineering, London, UK, 4- 6th July 2016 1. p.107-118(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
An evaluation of two methods to predict temperatures in multi-room compartment fires
(
- Contribution to journal › Article
-
Mark
A Study of Reproducibility of a Full-Scale Multi-Room Compartment Fire Experiment
(
- Contribution to journal › Article
-
Mark
Numerical experiments in fire science: a study of ceiling jets
(
- Contribution to journal › Article
-
Mark
Experience using controlled atmosphere cone calorimeter at Lund University
2015)(
- Other contribution › Miscellaneous
-
Mark
Fire properties of borated polyethylene
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Sven Erik Magnusson (1938–2014)
(
- Contribution to journal › Article
-
Mark
Obtaining additional smoke characteristics using multi-wavelength light transmission measurements
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Challenges in determining critical mass flux for ignition
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Brandprovning av aerosol- och gasolbehållare : en studie för MSB
2015) In Institutionsrapporter(
- Book/Report › Report
-
Mark
Experimental and thermal analysis of wall assemblies exposed to standard and parametric fires
2015) CONFAB 2015 The First International Conference on Structural Safety under Fire & Blast(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2014
-
Mark
Advantages and challenges with using hypoxic air venting as fire protection
(
- Contribution to journal › Article
-
Mark
Prediction and validation of pool fire development in enclosures by means of CFD Models for risk assessment of nuclear power plants (Poolfire) – Final Report
2014)(
- Book/Report › Report
-
Mark
A correlation for predicting smoke layer temperature in a room adjacent to a room involved in a pre-flashover fire
(
- Contribution to journal › Article
-
Mark
A New Method for Quantifying Fire Growth Rates Using Statistical and Empirical Data – Applied to Determine the Effect of Arson
2014) 11th International Symposium on Fire Safety Science(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Technical Measures to Prevent and Mitigate the Consequences of Arson in School Buildings
2014) 11th International Symposium on Fire Safety Science(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Simplified Relation Between Hot Layer Height and Opening Mass Flow
2014) 11th International Symposium on Fire Safety Science(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
SAFE MULTIBYGG, Slutrapport Riskidentifiering, analys och åtgärdsmetodik för olycksförebyggande arbete för multifunktionella byggnader med avseende på specifika antagonistiska hot
2014) In Department of Fire Safety Engineering and System Safety(
- Book/Report › Report
- 2013
-
Mark
Validation and Verification of Fire Models for Fire Safety Engineering
(
- Contribution to journal › Article
-
Mark
Validation of FDS for large-scale well-confined mechanically ventilated fire scenarios with emphasis on predicting ventilation system behavior
(
- Contribution to journal › Article
-
Mark
Façade Fires in Swedish School Buildings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Selection and evaluation of fire related scenarios in multifunctional buildings considering antagonistic attacks
(
- Contribution to journal › Scientific review
-
Mark
Room-Fire Characterization Using Highly Range-Resolved Picosecond Lidar Diagnostics and CFD Simulations
(
- Contribution to journal › Article
-
Mark
A Monte Carlo analysis of the effect of heat release rate uncertainty on available safe egress time
(
- Contribution to journal › Article
-
Mark
Simple Ceiling Jet Correlation Derived from Numerical Experiments
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Accounting for Arson Fires in Fire Safety Engineering
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Behaviour of an Intumescing System Subjected to Different Heating Conditions
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Advantages and challenges with using hypoxic air venting as fire protection
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Fire safety in military vehicles evaluation of ISO 3795
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Challenges for international standardization during the next decades with respect to the areas of new innovative products and fire safety engineering
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Anlagd brand –Analys av kostnader och nyttor med tekniska system
2013)(
- Book/Report › Report
-
Mark
Tekniska system för att förhindra och begränsa anlagd brand– Slutrapport
2013)(
- Book/Report › Report
- 2012
-
Mark
SAFE MULTIBYGG AP 1-4 : Delrapport
2012)(
- Book/Report › Report
-
Mark
Combining Statistics and Case Studies to Identify and Understand Deficiencies in Fire Protection
(
- Contribution to journal › Article
-
Mark
Slutrapport: Varför blir vissa små bränder stora?
2012) In LUTVDG/TVBP--3167--SE(
- Book/Report › Report
-
Mark
Detection of a typical arson fire scenario – comparison between experiments and simulations
(
- Contribution to journal › Article
-
Mark
Kartläggning och kvalitativ analys av möjligheter och risker med reducerad syrehalt i brandceller innehållande elektrisk utrustning
2012)(
- Book/Report › Report
-
Mark
A Cost-Benefit Analysis of Fire Protection Systems Designed to Protect Against Exterior Arson Fires in Schools
2012) 9th International Conference on Performance-Based Codes and Fire Safety Design Methods(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
En metodik för att utvärdera brandskadescenario på kärnkraftverk
2012) In LUTVDG/TVBB--3159--SE(
- Book/Report › Report
-
Mark
Analysis of Fire Scenarios in Order to Ascertain an Acceptable Safety Level in Multi-Functional Buildings
2012) 9th International Conference on Performance-Based Codes and Fire Safety Design Methods(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cellplaster och brand
(
- Contribution to specialist publication or newspaper › Specialist publication article
- 2011
-
Mark
Flame Spread Modelling of Complex Textile Materials
(
- Contribution to journal › Article
-
Mark
Study of pyrolysis and upward flame spread on charring materials-Part I: Experimental study
(
- Contribution to journal › Article
-
Mark
Quantifying differences between computational results and measurements in the case of a large-scale well-confined fire scenario
(
- Contribution to journal › Article
-
Mark
Learning from Real Fire Incidents : a Methodology for Case Studies
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design Fires for Fire Protection Engineering of Swedish School Buildings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tekniska lösningar för att förhindra och begränsa anlagda bränder
(
- Contribution to specialist publication or newspaper › Specialist publication article
-
Mark
Validation and development of different calculations methods and software packages for fire safety assessment in swedish nuclear power plants
2011) 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21) - 12th International Pre-Conference Seminar on “FIRE SAFETY IN NUCLEAR POWER PLANTS AND INSTALLATIONS“(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2010
-
Mark
Fallstudier – Vilka tekniska faktorer spelar en roll vid anlagd brand i skolor?
2010) In LUTVDG/TVBB--3148-SE(
- Book/Report › Report
-
Mark
Simulation of critical evacuation conditions for a fire scenario involving cables and comparison of two different cables
2010) In LTH report(
- Book/Report › Report
-
Mark
Use of the Cone Calorimeter and ConeTools software for development of innovative intumescing graphite systems
(
- Contribution to journal › Article
-
Mark
En studie av vindsbränder utifrån statistik och brandutredningar
2010) In LUTVDG/TVBB--3152--SE(
- Book/Report › Report
-
Mark
Bränder i boendemiljö - En förstudie från BRANDFORSK
2010)(
- Book/Report › Report
-
Mark
Use Of Case Studies To Determine Technical Deficiencies With Respect To Fire Spread In School Buildings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2009
-
Mark
Determination of uncertainty of different CFD codes by means of comparison with experimental fire scenarios
2009)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2008
-
Mark
Fire safety engineering techniques for innovative materials such as technical textiles and nanocomposites
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Kvalitetssäkring av olycks- och skadeförebyggande arbetet med brandskydd i byggnader
2008) In LUTVDG/TVBP--3144--SE(
- Book/Report › Report
- 2007
-
Mark
Fires in storages of biofuels
2007)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An experimental study of spontaneous ignition in storages of wood pellets
2007)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Development of conetools for the Euroclasses of cables
2007) Interflam 2007(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Overview of the biofuel project
2007) In CECOST annual seminar(
- Contribution to journal › Published meeting abstract
-
Mark
Pyrolysis modelling within CFD codes
(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
On the intumescence of ethylene-acrylate copolymers blended
(
- Contribution to journal › Article
-
Mark
Modelling of Euroclass Test Results by Means of the Cone Calorimeter
(
- Chapter in Book/Report/Conference proceeding › Book chapter
- 2006
-
Mark
Fire behaviour of sandwich panels
2006) p.149-149(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
The need for full scale fire testing of sandwich panels
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2005
-
Mark
New data for sandwich panels on the correlation between the SBI test method and the room corner reference scenario
(
- Contribution to journal › Article
-
Mark
Validation of CFD Model for Simulation of Spontaneous Ignition in Bio-mass Fuel Storage
2005) IAFSS 8th Symposium on Fire Safety Science 2005(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
How to use the cone calorimeter for prediction of fires and fire test results and for use as product development and quality control tool - New developments
2005) 9th International Conference on Fire and Materials 2005(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance of cables subjected to elevated temperatures
2005) p.1121-1132(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2004
-
Mark
European Fire Classes for Cables-The Development of an Evaluation System
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2003
-
Mark
A proposal for fire testing and classification of cables for use in Europe
2003) In Report to the European commission and the fire regulators group(
- Book/Report › Report
-
Mark
Cables fires in difficult to access areas - Study of Ventilation effect in horizontal and vertical set-ups
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design fire enclosures. A first attempt to create design fires based on Euroclasses for linings. BRANDFORSK project 314-001
2003) In SP report(
- Book/Report › Report
-
Mark
A proposal for fire testing and classification of cables for use in Europe
2003)(
- Book/Report › Report
- 2002
-
Mark
Cable Fires in Difficultly Accessible Areas Brandforsk project 623-001
2002) In SP Rapport(
- Book/Report › Report
- 2001
-
Mark
Simple Analytical and Numerical Techniques for Modelling Flame Spread on Solids Simple Analytical and Numerical Techniques for Modelling Flame Spread on Solids
2001) In LUTVDG/TVBB--7014--SE(
- Book/Report › Report
-
Mark
Assessing the fire performance of electric cables (FIPEC)
(
- Contribution to journal › Article
-
Mark
Mathematical modelling of fire development in cable installations
(
- Contribution to journal › Article
-
Mark
Uncertainties in measuring heat and smoke release rates in the room/corner test and the SBI
2001) In SP RAPPORT(
- Book/Report › Report
-
Mark
Making connections
(
- Contribution to journal › Article
- 2000
-
Mark
Performance of Cables Subject to Thermal Radiation
2000) In SP RAPPORT(
- Book/Report › Report
-
Mark
Influence of delay times and response times on heat release measurements
(
- Contribution to journal › Article
-
Mark
Development of a Test Procedure for Sandwich Panels using ISO 9705 Philosophy Nordtest Project nr 1432-99
2000) In SP RAPPORT(
- Book/Report › Report
- 1999
-
Mark
Prediction of SBI (single burning item) test results by means of cone calorimeter test results
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1998
-
Mark
Simulation of the Switel Hotel Fire
1998) In SP RAPPORT(
- Book/Report › Report
-
Mark
Results and analysis from fire tests of building products in ISO 9705, the room/corner test
1998)(
- Book/Report › Book
- 1997
-
Mark
An overview of the findings of the combustion behaviour of upholstered furniture project
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1996
-
Mark
Influence of ignition sources on heat release rate in the furniture calorimeter
(
- Contribution to journal › Article
-
Mark
Short communication: An overview of the findings of the Combustion Behaviour of Upholstered Furniture project
(
- Contribution to journal › Article
- 1995
-
Mark
Reaction to fire of construction products Area A : test methods
1995)(
- Book/Report › Report
- 1993
-
Mark
Combustion behaviour of fabric and polyurethane (PU) flexible foam mock-up combinations under cone calorimetry test conditions
1993) In Fire and Materials(
- Contribution to journal › Article
-
Mark
Combustion behaviour of polyurethane flexible foams under Cone Calorimetry test conditions
(
- Contribution to journal › Article
-
Mark
Combustion behaviour of fabric and polyurethane flexible foam mock‐up combinations under Cone Calorimetry test conditions
(
- Contribution to journal › Article
-
Mark
Calorimetric combustion assessment of polyurethane flexible foam and fabric composites
(
- Contribution to journal › Article
- 1992
-
Mark
Combustion behaviour of fabric and polyurethane flexible foam mock-up combinations under cone calorimetry test conditions
(
- Contribution to journal › Article
-
Mark
Combustion behaviour of polyurethane flexible foams under cone calorimetry test conditions
(
- Contribution to journal › Article