1 – 147 of 147
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
On the wear mechanisms of uncoated and coated carbide tools in milling titanium alloys
(
- Contribution to journal › Article
-
Mark
On wear of TiAlN coated tools with and without NbN overlayer in machining titanium alloys
(
- Contribution to journal › Article
-
Mark
Machinability improvement by in-operando Tool Protection Layers through designed steel alloying : The case of manganese steel
(
- Contribution to journal › Article
-
Mark
Spatially resolved structural and chemical properties of the white layer in machined Inconel 718 super alloy
(
- Contribution to journal › Article
-
Mark
Effect of ageing on machining performance of grey cast iron and its compensation by cutting speed management
2024) In CIRP Annals(
- Contribution to journal › Article
-
Mark
Diffusion Bonding 321-Grade Stainless Steel : Failure and Multimodal Characterization
2024) In Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada 30(2). p.192-199(
- Contribution to journal › Article
-
Mark
The Role of Microfibers and Liquid Aluminum in the Reaction between Boron Nitride and Tantalum Nitride
(
- Contribution to journal › Article
-
Mark
Wear mechanisms in Ti(C,N)-Al2O3 coated carbide during sustainable machining CGI
(
- Contribution to journal › Article
- 2023
-
Mark
Predicting wear mechanisms of ultra-hard tooling in machining Ti6Al4V by diffusion couples and simulation
(
- Contribution to journal › Article
-
Mark
High-Temperature Oxidation of Titanium Aluminium Nitride Coatings Visualized by Environmental Transmission Electron Microscopy
2023) European Materials Research Society 2023 Spring Meeting(
- Contribution to conference › Abstract
-
Mark
Machining of Titanium Alloys with a Cemented Carbide Cutting Tools with Tungsten-Based Vacuum-Arc Nitride Coatings
(
- Contribution to journal › Article
-
Mark
On chemical interactions between an inclusion engineered stainless steel (316L) and (Ti,Al)N coated tools during turning
(
- Contribution to journal › Article
-
Mark
Visualising microstructural dynamics of titanium aluminium nitride coatings under variable-temperature oxidation
(
- Contribution to journal › Article
-
Mark
Degradation of multi-layer CVD-coated cemented carbide in finish milling compacted graphite iron
(
- Contribution to journal › Article
-
Mark
Automated detection of tool wear in machining and characterization of its shape
(
- Contribution to journal › Article
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791407(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791391(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17789417(
- Patent › Patent
- 2022
-
Mark
On the function of lead (Pb) in machining brass alloys
2022) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of different PcBN tools when machining superalloy AD730
(
- Contribution to journal › Article
-
Mark
Multicomponent binders for PcBN performance enhancement in cutting tool applications
(
- Contribution to journal › Article
-
Mark
Influence of sub-surface deformation induced by machining on stress corrosion cracking in lead-free brass
(
- Contribution to journal › Article
-
Mark
Understanding wear and interaction between CVD α-Al2O3 coated tools, steel, and non-metallic inclusions in machining
(
- Contribution to journal › Article
- 2021
-
Mark
Evaluation of tool wear mechanisms and tool performance in machining single-phase tungsten
(
- Contribution to journal › Article
-
Mark
Experimental study and modeling of the heat flux acting on the tool flank when machining
2021) 18th CIRP Conference on Modeling of Machining Operations, CMMO 2021 In Procedia CIRP 102. p.97-102(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermodynamic modeling framework for prediction of tool wear and tool protection phenomena in machining
(
- Contribution to journal › Article
-
Mark
Novel metric “Implenarity” for characterization of shape and defectiveness : The case of CFRP hole quality
(
- Contribution to journal › Article
-
Mark
Cryogenic and hybrid induction-assisted machining strategies as alternatives for conventional machining of refractory tungsten and niobium
(
- Contribution to journal › Article
-
Mark
Onset of the degradation of CVD α-Al2O3 coating during turning of Ca-treated steels
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining
(
- Contribution to journal › Article
-
Mark
Improvement of tool utilization when hard turning with cBN tools at varying process parameters
(
- Contribution to journal › Article
-
Mark
Tool wear mechanisms of PcBN in machining Inconel 718 : Analysis across multiple length scale
(
- Contribution to journal › Article
-
Mark
Characterisation of worn WC tool using STEM-EDS aided by principal component analysis
(
- Contribution to journal › Article
-
Mark
Wear mechanisms of PcBN tools when machining AISI 316L
(
- Contribution to journal › Article
- 2020
-
Mark
The Influence of SiC and Al2O3 Whiskers on the Properties of Whisker-Reinforced cBN-Based Composites
(
- Contribution to journal › Article
-
Mark
Study of wear mechanisms of cemented carbide tools during machining of single-phase niobium
(
- Contribution to journal › Article
-
Mark
Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications
(
- Contribution to journal › Article
-
Mark
Evolution of the Microstructure and Mechanical Properties of cBN-Based Cutting Tools with Silicides Compounds as Binder Phase
2020) 9th Swedish Production Symposium, SPS 2020 In Advances in Transdisciplinary Engineering 13. p.428-438(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Sintering of BN Based Composites with ZrC and Al under High Temperatures and Pressures
(
- Contribution to journal › Article
-
Mark
Influence of cBN content, Al2O3 and Si3N4 additives and their morphology on microstructure, properties, and wear of PCBN with NbN binder
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of PCD and pcBN cutting tools during machining titanium alloy Ti6Al4V
(
- Contribution to journal › Article
-
Mark
Electrical Characteristics of Thermobarically Sintered cBN–NbN Composite
(
- Contribution to journal › Article
-
Mark
Sintering of cBN Based Materials with a TaC Binder for Cutting Tool Application
(
- Contribution to journal › Article
-
Mark
Machinability evaluation of low-lead brass alloys
2020) 29th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2019 In Procedia Manufacturing 38. p.1723-1730(
- Contribution to journal › Article
-
Mark
Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
Sintering of Superhard cBN-Based Materials with Ti4WC5
(
- Contribution to journal › Article
-
Mark
CBN-based cutting tools with niobium compounds as a binder phase
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2019
-
Mark
Small scale testing of PCD and WC-Co tooling in rock cutting using longitudinal turning
(
- Contribution to journal › Article
-
Mark
On chemical and diffusional interactions between PCBN and superalloy Inconel 718 : Imitational experiments
(
- Contribution to journal › Article
-
Mark
Mechanical Properties of Boron Phosphides
(
- Contribution to journal › Article
-
Mark
The influence of sintering temperature on phase composition and mechanical properties of сbn-based composites with addition of vanadium compounds
(
- Contribution to journal › Article
-
Mark
Mechanical properties of ultra-hard nanocrystalline cubic boron nitride
(
- Contribution to journal › Article
-
Mark
Tool–chip thermal conductance coefficient and heat flux in machining : Theory, model and experiment
(
- Contribution to journal › Article
-
Mark
Assessment of Metal Cutting Tools using Cost Performance Ratio and Tool Life Analyses
2019) 9th International Conference on Flexible Automation and Intelligent Manufacturing ( FAIM 2019) In Procedia Manufacturing 38. p.816-823(
- Contribution to journal › Article
-
Mark
Determining process parameters for successful material reclamation of lead-free brass chips using hot forging operations: Lubrication
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Quantitative analysis of chip segmentation in machining using an automated image processing method
2019) 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO In Procedia CIRP 82. p.314-319(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2018
-
Mark
Heat flux in metal cutting : Experiment, model, and comparative analysis
(
- Contribution to journal › Article
-
Mark
Hole-quality evaluation in drilling fiber-reinforced composites
(
- Contribution to journal › Article
-
Mark
FE simulation and experimental verification of side-flow and burr formation in machining of oxygen-free copper
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Selecting Cutting Data Tests for Cutting Data Modeling Using the Colding Tool Life Model
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of the mechanical properties and cutting performance of cBN-based cutting tools with Cr3C2 binder phase.
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Equivalent Chip Thickness and its Influence on Tool Life
(
- Contribution to journal › Article
-
Mark
An inverse problem for retrieving time dependency of heat flux in metal cutting via linear programming
(
- Contribution to journal › Article
-
Mark
Superhard pcBN materials with chromium compounds as a binder
(
- Contribution to journal › Article
-
Mark
Modelling tool life in high speed machining of AD730
(
- Contribution to journal › Article
-
Mark
Influence of oxygen on the tool wear in machining
(
- Contribution to journal › Article
-
Mark
Surface Characterization of AD730TM Part Produced in High Speed Turning with CBN tool
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Особливості формування структури та фазового складу в процесі реакційного спікання кубічного нітриду бору зі сполуками Ti, Cr, V
(
- Contribution to journal › Article
-
Mark
Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Wear Mechanisms of pcBN tooling during High-Speed Machining of Gray Cast Iron
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis of the minimum chip thickness during turning of duplex stainless steel
2018) In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233(7). p.1733-1744(
- Contribution to journal › Article
-
Mark
Surface roughness and sub-surface deformation measurements in machining of niobium
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Development of a simulation model to study tool loads in pcBN when machining AISI 316L
(
- Contribution to journal › Article
-
Mark
Experimental investigations into tool wear of drilling CFRP
(
- Contribution to journal › Article
-
Mark
The correct way of splitting tools - Optimization of instrument design for measuring contact stress distribution
(
- Contribution to journal › Article
-
Mark
Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718
(
- Contribution to journal › Article
-
Mark
Application of Colding tool life equation on the drilling fiber reinforcement polymers
(
- Contribution to journal › Article
-
Mark
Metallmatriskompositer i masstillverkade komponenter och produkter : - MMC 2016-2018
2018)(
- Book/Report › Report
-
Mark
CPR a general Cost Performance Ratio in Manufacturing - A KPI for judgement of different technologies and development scenarios
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2017
-
Mark
Modeling subsurface deformation induced by machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
(
- Contribution to journal › Article
-
Mark
Comparative study on the machinability of lead-free brass
(
- Contribution to journal › Article
-
Mark
Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
(
- Contribution to journal › Article
-
Mark
Wear mechanisms of uncoated and coated cemented carbide tools in machining lead-free silicon brass
(
- Contribution to journal › Article
-
Mark
Hot Forging Operations of Brass Chips for Material Reclamation after Machining Operations
(
- Contribution to journal › Article
-
Mark
Assessment of Commonly used Tool Life Models in Metal Cutting
(
- Contribution to journal › Article
-
Mark
Sensitivity of Colding tool life equation on the dimensions of experimental dataset
(
- Contribution to journal › Article
-
Mark
Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
(
- Contribution to journal › Article
-
Mark
Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools
(
- Contribution to journal › Article
-
Mark
Mechanical properties of superhard boron subnitride B13N2
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite
(
- Contribution to journal › Article
-
Mark
Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder : Structure, properties, application
(
- Contribution to journal › Article
-
Mark
Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.122-127(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental and Numerical Investigation of Burr Formation in Intermittent Turning of AISI 4140
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.37-42(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2016
-
Mark
Ultrahard boron nitride material through a hybrid laser/waterjet based surface treatment
(
- Contribution to journal › Article
-
Mark
Machinability analysis of ISO-grouped workpiece material : -With focus on cutting force modelling
2016) 7th International Swedish Production Symposium(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effect of feed on sub-surface deformation and yield strength of oxygen-free pitch copper in machining
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability of CuZn21Si3P brass
(
- Contribution to journal › Article
-
Mark
Tool Wear and Vibrations Generated When Turning High-chromium White Cast Iron with pCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
Ternary intermetallic compounds in Au-Sn soldering systems-structure and properties
(
- Contribution to journal › Article
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 2: Variation of Tool Geometry along the Edge Line
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influences of micro mechanical property and microstructure on performance of machining high chromium white cast iron with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters under Variation of Side and Back Rake Angle
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance assessment of pCBN and bCBN tools in machining of high-chromium white cast iron
(
- Contribution to journal › Article
-
Mark
HP-HT sintering, microstructure, and properties of B6O- and TiC-containing composites based on cBN
(
- Contribution to journal › Article
- 2014
-
Mark
Modeling and experimentation on multistage work-hardening mechanism in machining with nose-radiused tools and its influence on machined subsurface quality and tool wear
(
- Contribution to journal › Article
-
Mark
Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of the minimum chip thickness on the obtained surface roughness during turning operations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel
(
- Contribution to journal › Article
-
Mark
Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of the Workpiece Material Properties on the Cutting Forces
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Life and Wear Modelling in Metal Cutting, Part 2 ─ Based on Combining the Archard and the Colding Equations
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Self-generated vibrations and process stability when turning high chromium white cast iron with PCBN tools
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Nano graphite flakes as lubricant additive
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Life and Wear Model in Metal Cutting, Part 1 - Influence of Varying Flank Wear Criterion on Colding's Tool Life Equation
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability of Lead-Free Brass – A comparative study
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability and process stability when turning Alloy 718 with standard and produced by selective laser sintering toolholders
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
EFFECTS OF COOLING RATE AND SILICON CONTENT ON AL/SICp MMC
2014) Swedish Production Symposium, 2014(
- Contribution to conference › Paper, not in proceeding
-
Mark
Influence of cutting speed and tool wear on vibrations and process stability when turning Inconel 718 with PCBN tools
(
- Contribution to journal › Article
-
Mark
Residual stresses in high speed turning of nickel-based superalloy
(
- Contribution to specialist publication or newspaper › Specialist publication article
- 2013
-
Mark
Wear mechanisms of silicon carbide-whisker-reinforced alumina (Al2O3-SiCw) cutting tools when high-speed machining aged Alloy 718
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of whisker-reinforced alumina, coated and uncoated PCBN tools when high-speed turning aged Inconel 718
(
- Contribution to journal › Article
-
Mark
Dynamic Stability of the Process of Turning Nickel Superalloys Using a Toolholder Produced by Selective Laser Sintering
(
- Contribution to journal › Article
-
Mark
The influence of tool steel microstructure on friction in sheet metal forming
(
- Contribution to journal › Article
-
Mark
Effects of Cutting Speed when Turning Age Hardened Inconel 718 with PCBN Tools of Binderless and Low-CBN Grades
(
- Contribution to journal › Article
-
Mark
ECCI and EBSD study of subsurface damages in high speed turning of inconel 718 under different tools and machining parameters
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718
2013) The 13th International Conference on Fracture (ICF13)(
- Contribution to conference › Paper, not in proceeding
-
Mark
Extreme Hardness Achievements in Binderless Cubic Boron Nitride Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of Dry Cut and Tool Wear on Residual Stresses in High Speed Machining of Nickel-Based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool wear and tool life of conventional pcBN, binderless cBN and wBN-cBN tool materials in continuous finish hard turning of cold work tool steel
2013) 16-th International Conference Rock- and materials-processing tools: engineering, technology and application(
- Contribution to conference › Paper, not in proceeding
- 2012
-
Mark
Comprehensive dynamic analysis of vibration and stability when ultrahigh speed turning Inconel 718 with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
(
- Contribution to journal › Article
-
Mark
Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
(
- Contribution to journal › Article
-
Mark
Identification of Subsurface Deformation in Machining of Inconel 718
2012) International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011) In Applied Mechanics and Materials 117-119. p.1681-1688(
- Contribution to journal › Article
-
Mark
Modelling Subsurface Deformation in High Speed Machining of Inconel 718
2012) 1st CIRP International Conference on Virtual Machining Process Technology(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2011
-
Mark
Characterization of White Layer Generated when Turning Aged Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Study of the Minimum Chip Thickness during the Machining of Duplex Stainless Steel
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Process induced subsurface deformation of Alloy 718 in relation to different cutting conditions
(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the surface quality of Alloy 718 in finishing turning with CBN cutting tools
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling tool life in the machining of strain-hardening material - Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 2: Variation of tool angles along the edge line
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 1: Chip area parameters under both side and back rake angles variation
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Study on work-hardening phenomena in machining aged Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding