1 – 152 of 152
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Reducing the Environmental Impact of Large Battery Systems with Conductive Electric Road Systems—A Technical Overview
(
- Contribution to journal › Article
-
Mark
Efficiency evaluation of a conductive Electric Road System with respect to traffic characteristics
2024) In IEEE Transactions on Vehicular Technology(
- Contribution to journal › Article
-
Mark
The optimal capacity expansion planning for the terminals of the logistics company
(
- Contribution to journal › Article
- 2023
-
Mark
Statistical Assessment of Core Loss Measurement Techniques for Laminated Steel
2023) 2023 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) In IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) 2023.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Common Mode Current Measurements in Traction Systems for Electric Vehicles
(
- Contribution to journal › Article
-
Mark
Electro-thermal Models of Power Modules for Stochastic Optimization of Inverters
2023) 2023 IEEE Transportation Electrification Conference and Expo, ITEC 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Parameter Identification For Inter Turn Fault Detection In Permanent-Magnet Synchronous Motors Using Stator Flux Linkage DC Offset Monitoring
2023) 14th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2023 p.498-504(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison of PMSM versus PMa-SynRM and IM from an Optimized Electric Vehicle Powertrain Perspective
2023) 26th International Conference on Electrical Machines and Systems, ICEMS 2023 In 2023 26th International Conference on Electrical Machines and Systems, ICEMS 2023 p.4075-4080(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optimization of Powertrain Platform for Electric Passenger Vehicles
2023) 2023 IEEE Transportation Electrification Conference and Expo, ITEC 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An Economic Assessment of the Terminal Electrification for the Logistics Company
2023) 14th IEEE International Symposium on Power Electronics for Distributed Generation Systems, PEDG 2023 p.716-721(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Forecasting Based Hierarchical Energy Management for Sustainable Data Centers
2023) 49th Annual Conference of the IEEE Industrial Electronics Society, IECON 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling Electric Transients in a Conductive Electric Road System
2023) 115th AEIT International Annual Conference, AEIT 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optimization of Induction Machine Design for Electric Vehicle Powertrain
2023) 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023 In 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electric off-road mobile machinery systems with portable energy supply and local energy generation
2023) 2023 IEEE Belgrade PowerTech, PowerTech 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2022
-
Mark
Assessment of future EV charging infrastructure scenarios for long-distance transport in Sweden
(
- Contribution to journal › Article
-
Mark
Modelling of power flow and losses in a conductive Electric Road System
2022) 2022 IEEE Vehicle Power and Propulsion Conference, VPPC 2022 In 2022 IEEE Vehicle Power and Propulsion Conference, VPPC 2022 - Proceedings(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Theoretical Study Of Stator Flux Linkage DC Offset Based Stator Fault Detection For PMSM Drive Systems
2022) 2022 IEEE Vehicle Power and Propulsion Conference, VPPC 2022(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Conductive Electric Road Localization and Related Vehicle Power Control
(
- Contribution to journal › Article
-
Mark
Dovetail Design for Direct Cooled Rotor: Design and Manufacturing
2022) p.2121-2127(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance Degradation due to Cut Edge Effect for an Axial-Flux Induction Machine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2021
-
Mark
Electric drivetrain optimization for a commercial fleet with different degrees of electrical machine commonality
(
- Contribution to journal › Article
-
Mark
Concept design of electric cruise and startability axles for long haul heavy vehicles to maximise driving range
2021) 18th IEEE Vehicle Power and Propulsion Conference, VPPC 2021(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Energy supply to buses on a conductive electric road : An evaluation of charger topologies and electric road characteristics
(
- Contribution to journal › Article
-
Mark
Measuring electric properties of a conductive electric road
2021) 2021 AEIT International Conference on Electrical and Electronic Technologies for Automotive, AEIT AUTOMOTIVE 2021(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2020
-
Mark
Integrated and isolated EV charger for AC and electric road applications
2020) 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020 In 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020 p.114-119(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling of electric power system in electric vehicles
2020) 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020 In 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020 p.293-298(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Automatic static charging of electric distribution vehicles using ERS technology
2020) 2020 IEEE Transportation Electrification Conference and Expo, ITEC 2020 In 2020 IEEE Transportation Electrification Conference and Expo, ITEC 2020 p.1191-1196(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2019
-
Mark
Optimization of Electric Powertrains Based on Scalable Cost and Performance Models
(
- Contribution to journal › Article
-
Mark
Electric safety challenges with a conductive electric road system-Chassis potential modeling and measurement
(
- Contribution to journal › Article
-
Mark
Thermal modeling of an ERS during static charging
2019) 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Alternative EV powertrain topologies designed for operation in a conductive electric road system
2019) 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal Assessment of an ERS for Static Charging of Electric Vehicles
2019) 2019 IEEE Transportation Electrification Conference and Expo(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Using Multi-Agent Transport Simulations to Assess the Impact of EV Charging Infrastructure Deployment
2019) 2019 IEEE Transportation Electrification Conference and Expo(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance Estimation of a Traction Machine with Direct Cooled Hairpin Winding
2019) 2019 IEEE Transportation Electrification Conference and Expo(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal modeling of an ERS during dynamic charging
2019) 2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Characterization of Onboard Condition Monitoring Techniques for Stator Insulation Systems in Electric Vehicles : A Review
2019) 45th Annual Conference of the IEEE Industrial Electronics Society, IECON 2019 In IECON Proceedings (Industrial Electronics Conference) 2019. p.3179-3186(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2018
-
Mark
Electric roads : Analyzing the societal cost of electrifying all Danish road transport
(
- Contribution to journal › Article
-
Mark
Lumped-parameter grey-box modelling of traction machines for low-speed operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Power Losses and Heat Extraction in a Stator with Directly Air-Cooled Laminated Windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Direct Conductor Cooling in Concentrated Windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Testing Characterization of a Synchronous Reluctance Machine
(
- Contribution to journal › Article
-
Mark
Assessment of cooling integration with direct cooled windings
2018) 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
EV powertrain topologies for electric road applications
2018) 31st International Electric Vehicle Symposium and Exhibition, EVS 2018 and International Electric Vehicle Technology Conference 2018, EVTeC 2018(
- Contribution to conference › Paper, not in proceeding
- 2017
-
Mark
Scalable performance, efficiency and thermal models for electric drive components used in powertrain simulation and optimization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electric roads : Reducing the societal cost of automotive electrification
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
From Chip to Converter : A Complete Cost Model for Power Electronics Converters
(
- Contribution to journal › Article
-
Mark
Thermal design of an electric road system
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Societal cost of electrifying all danish road transport
2017) 30th International Electric Vehicle Symposium and Exhibition, EVS 2017(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance and manufacturability tradeoffs of different electrical machine designs
2017) 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Magnetic Model Identification of Permanent Magnet Synchronous Machines
(
- Contribution to journal › Article
-
Mark
Dynamic charging solutions in Sweden : An overview
2017) 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific, ITEC Asia-Pacific 2017(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electric roads : The importance of sharing the infrastructure among different vehicle types
2017) 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific, ITEC Asia-Pacific 2017(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2016
-
Mark
A method for in-situ characterization of PMSM traction machines
2016) 2016 IEEE 16th International Conference on Environment and Electrical Engineering(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Testing characterization of a synchronous reluctance machine
2016) 11th International Conference on Ecological Vehicles and Renewable Energies, EVER 2016(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Degradation and Fatigue of Epoxy Impregnated Traction Motors Due to Thermal and Thermal Induced Mechanical Stress : Part I: Thermal Mechanical Simulation of Single Wire due to Evenly Distributed Temperature
2016) 8th International Conference on Power Electronics, Machines and Drives PEMD 2016(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dielectric Properties Modeling and Measurement of Single Tooth Coil Insulation System under Accelerated Degradation Test
(
- Chapter in Book/Report/Conference proceeding › Preface to conference proceeding
-
Mark
Direct electromagnetic actuation on high ratio gears
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Degradation and fatigue of epoxy impregnated traction motors due to thermal and thermal induced mechanical stress - Part I : Thermal mechanical simulation of single wire due to evenly distributed temperature
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Degradation and fatigue of epoxy impregnated traction motors due to thermal and thermal induced mechanical stress - Part II : Thermal mechanical simulation of multiple wires due to evenly and unevenly distributed temperature
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Engineering considerations on skewing of an interior permanent magnet synchronous machine for parallel hybrid electric heavy vehicles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
Predictive monitoring of turn-on-turn insulation in single tooth coils
2015) International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electrical Machine Design with Directly Cooled Laminated Fractional Pitch Windings
2015) 5th International Electric Drives Production Conference (E|DPC)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2014
-
Mark
Dynamic Thermal Modeling and Application of Electrical Machine in Hybrid Drives
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Consistency analysis of torque measurements performed on a PMSM using dynamic testing
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Testing Characterization of a HEV Traction Motor
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
FPGA implementation of a Deadbeat Direct Torque and Flux Control Scheme for Induction Machines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance Estimation of Hybrid Excited Machine with Alternating Pole Configuration
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cost estimation of electric traction machine and gearbox for a hybrid vehicle application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat transfer analysis of a traction machine with directly cooled laminated windings
2014) 2014 4th International Electric Drives Production Conference, EDPC 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Inductive coupling matrix of a multiconductor system for a winding-on-core prototype
2014) 2014 International Symposium on Electromagnetic Compatibility (EMC'14)(
- Contribution to conference › Paper, not in proceeding
-
Mark
Inductive Analysis of a Multiconductor System Prototype
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2013
-
Mark
Grid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
(
- Contribution to journal › Article
-
Mark
An Integrated 20-kW Motor Drive and Isolated Battery Charger for Plug-In Vehicles
(
- Contribution to journal › Article
-
Mark
Capacitively coupled transmission line model and validation of a winding-on-core prototype
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2012
-
Mark
Impact of soft magnetic material on construction of radial flux electrical machines
(
- Contribution to journal › Article
-
Mark
Sub-Optimization of a claw-pole structure according to material properties of soft magnetic materials
(
- Contribution to journal › Article
-
Mark
Electrical machines with laminated winding for hybrid vehicle application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Characterization and application of forced cooling channels for traction motors in HEVs
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
New manufacturing methods for electric motors using different soft magnetic material combinations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modular three-phase machines with laminated winding for hybrid vehicle application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Alternative production process for electric machine windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On wheel loader fuel efficiency difference due to operator behaviour distribution
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and evaluation of moulded powder-core machine for in-wheel drive application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and evaluation of electrical machine for parallel hybrid drive for heavy vehicles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and experimental evaluation of a compact hybrid excitation claw-pole rotor
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On increasing fuel efficiency by operator assistant systems in a wheel loader
2012) International Conference on Advanced Vehicle Technologies and Integration (VTI 2012) p.155-161(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Redesign of an Electrical Rear Wheel Drive (E-RWD) for a hybrid vehicle in a given drive cycle
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Laminated winding with rapid cooling capability for electrical machines
2012) International Conference for Inductive and Electromagnetic Components, Systems and Devices including Manufacturing and Processing (INDUCTICA 2012)(
- Contribution to conference › Paper, not in proceeding
-
Mark
Direct oil cooling of traction motors in hybrid drives
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2011
-
Mark
An Isolated High-Power Integrated Charger in Electrified-Vehicle Applications
(
- Contribution to journal › Article
-
Mark
Electro-thermal Simulations of a Power Electronic Inverter for a Hybrid Car
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evaluation of a Semi Claw-Pole Machine with SM2C Core
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Evaluation of the Overloading Potential of a Convection Cooled Permanent Magnet Synchronous Motor
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance and efficiency evaluation of FPGA controlled IPMSM under dynamic loading
2011) 2011 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics & Drives (SDEMPED) p.550-555(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2010
-
Mark
Towards manufacturing of perfect magnets
2010) FAIM2010, Flexible Automation and Intelligent Manufacturing(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design, optimization and construction of an electric motor for an Electric Rear Wheel Drive Unit application for a Hybrid Passenger Car
2010) XIX International Conference on Electrical Machines (ICEM), 2010(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An integrated design of SM2C core motor for vehicular applications
2010) XIX International Conference on Electrical Machines (ICEM), 2010(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Prototype based study of different winding configurations with SM2C core
2010) XIX International Conference on Electrical Machines (ICEM), 2010(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2009
-
Mark
Design and prototyping a torus machine with a rotocast core
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Development of a radial flux machine design environment
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An integrated design of a machine with soft magnetic mouldable composite
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A comparison between PMSM, EMSM and SMSM in a BAS application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
New advances in soft magnetic materials - properties of moulded flux conductors in inductors and electrical motors
2009) Inductica Technical Conference(
- Contribution to conference › Paper, not in proceeding
-
Mark
Evaluation of soft magnetic mouldable composite core motors
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2008
-
Mark
Prediction of Parasitic Components in an Automotive Environment
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Rotocast - a new methos to produce optimally packed SMC components
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
- 2007
-
Mark
Injection moulding of magnetic flux conductors based on soft magnetic composites
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
- 2006
-
Mark
Simulation and experimentation of a single-phase claw-pole motor
(
- Contribution to journal › Article
-
Mark
Modeling and presentation of the series magnetized synchronous machine
2006) International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006 2006. p.463-468(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison between three iron-powder topologies of electrically magnetized synchronous machiness
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Automotive power electronic future - from an EMC perspective
2006) 2006 International Symposium on Power Electronics, Electrical Drives, Automation and Motion p.609-613(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison between three iron-powder topologies of electrically magnetized synchronous machines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A compact field weakening controller implementation
2006) International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006 2006. p.696-700(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A BAS application of a series magnetized synchronous machine
2006) International Conference on Electrical Machines Conference, 2006(
- Contribution to conference › Paper, not in proceeding
-
Mark
Design of plastic bonded iron powder core motors
2006) International Conference on Electrical Machines Conference, 2006(
- Contribution to conference › Paper, not in proceeding
- 2005
-
Mark
Grundläggande Elektroteknik
2005)(
- Book/Report › Book
- 2004
-
Mark
Alternatives for leakage reduction in a novel claw-pole electrically magnetized synchronous machine
2004) Second International Conference on Power Electronics, Machines and Drives, PEMD 2004 1. p.386-391(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulation and experimentation of a single-phase claw-pole motor
2004) International Conference on Electrical Machines, 2004(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulation and experimentation of a two-phase claw-pole motor
2004) International Conference on Electrical Machines, 2004(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A resonant galvanically separated power MOSFET/IGBT gate driver
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison between four topologies of synchronous machines using SMC
2004) Seminar on SMC and their use in electrical machines(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A MEC network method based on the BH curve linearisation: study of a claw-pole machine
2004) International Conference on Electrical Machines, 2004(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Hybrid Drive Systems for Vehicles - Part 1
2004)(
- Book/Report › Report
-
Mark
Electromagnetic Compatibility Problems in Automotive Applications
2004) NORPIE 2004, Nordic Workshop on Power and Industrial Electronics(
- Contribution to conference › Paper, not in proceeding
-
Mark
Iron loss calculation in a claw-pole structure
2004) Nordic Workshop on Power and Industrial Electronics, NORPIE'04(
- Contribution to conference › Paper, not in proceeding
- 2003
-
Mark
Comparison between a novel claw-pole electrically magnetized synchronous machine without slip-rings and a permanent magnet machine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study of a three-phase claw-to-claw pole machine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Real life testing of a hybrid PEM fuel cell bus
(
- Contribution to journal › Article
-
Mark
Power Generation - a New Students Entrance to Power Electronics Education
2003) European Conference on Power Electronics and Applications, 2003(
- Contribution to conference › Paper, not in proceeding
-
Mark
A study of the acoustical properties of stators with an outer-surface layer of air gaps
2003) European Conference on Power Electronics and Applications, 2003(
- Contribution to conference › Paper, not in proceeding
-
Mark
Comparative Study of Petrol- and Diesel Hybrid Topologies vs Directly Diesel Driven Vehicle
2003) Electric Vehicle Symposium 18(
- Contribution to conference › Paper, not in proceeding
- 2002
-
Mark
Design of a claw-pole motor
2002) International Conference on Electrical Machines, 2002(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2001
-
Mark
Design and Implementation of a Quasi-Resonant DC Link Converter
2001) EPE 2001(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparative Study of Generic Hybrid Topologies
2001) International Electric Vehicle symposium, EVS 18(
- Contribution to conference › Paper, not in proceeding
- 2000
-
Mark
Zero Voltage Switching Converters
2000) Norpie 2000(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
En enkel planetväxel i en vindkraftapplikation med två generatorer
2000) In Technical report(
- Book/Report › Report
-
Mark
Simulation and verification of a Hybrid Bus
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Simulation Model comparing two different Hybrid Electric Busses
2000) Electrical Vehicles Symposium 17(
- Contribution to conference › Paper, not in proceeding
- 1999
-
Mark
Multiple Rotating Integrator Controller for Active Filters
1999) EPE 99(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optimization of a servo motor for an industrial robot application
1999) 8th European Conference on Power Electronics and Applications, 1999(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modular Vector Drive System: Implications for Magnetic Motor Design
1999) 8thEuropean Conference on Power Electronics and Applications (EPE99)(
- Contribution to conference › Paper, not in proceeding
-
Mark
A Matlab/Simulink Simulation Model of a Hybrid Electric Bus
1999) 8th European Conference on Power Electronics and Applications, 1999(
- Contribution to conference › Paper, not in proceeding
-
Mark
On Output Capacitor Size in Boost-Type Power-Converters with Constant Power
1999) 8th European Conference on Power Electronics and Applications, 1999(
- Contribution to conference › Paper, not in proceeding
-
Mark
A drive system for acoustical analysis
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1998
-
Mark
A Dual Purpose battery Charger for Electric Vehicles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Control of a split pole pair induction machine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1997
-
Mark
Efficiency of Off-Board, High Power, Electric Vehicle Battery Chargers with Active Power line Conditioning Capabilities
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A 40 kW switched reluctance engine starter/generator system for an electric hybrid vehicle
(
- Contribution to conference › Paper, not in proceeding
-
Mark
The dynamic thermal loading of an induction machine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Control and Design Interaction in Hybrid Electric Vehicles - Benefits of Using Power Electronics
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Random modulation of line commutated power converters
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1996
-
Mark
EHC-Electric Hybrid Vehicle Centre at LTH
1996)(
- Book/Report › Report