1 – 117 of 117
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Tribology and airborne particle emissions from grey cast iron and WC reinforced laser cladded brake discs
(
- Contribution to journal › Article
-
Mark
Effect of ageing on machining performance of grey cast iron and its compensation by cutting speed management
2024) In CIRP Annals(
- Contribution to journal › Article
-
Mark
Pin-on-disc tribological characterization of single ingredients used in a brake pad friction material
(
- Contribution to journal › Article
- 2023
-
Mark
A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants
(
- Contribution to journal › Article
-
Mark
Modelling and Simulation of Gearset Behavior : Effects of Manufacturing Errors and Electrification
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Characterization of ultrafine particles from hardfacing coated brake rotors
(
- Contribution to journal › Article
-
Mark
Airway contraction and cytokine release in isolated rat lungs induced by wear particles from the road and tire interface and road vehicle brakes
(
- Contribution to journal › Article
-
Mark
On the impact of pad material ingredients on particulate wear emissions from disc brakes
(
- Contribution to journal › Article
-
Mark
Ultrafine particle emissions from dry clutches : number concentration, size distribution and chemical composition
2023) In Environmental Science: Atmospheres(
- Contribution to journal › Article
-
Mark
A multi-perspective method for gear efficiency and contact analysis
(
- Contribution to journal › Article
- 2022
-
Mark
Simulation of thermal and mechanical performance of laser cladded disc brake rotors
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(1). p.3-14(
- Contribution to journal › Article
-
Mark
Reducing scrapping of gears by assessment of tip contact threshold torque
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(8). p.1613-1622(
- Contribution to journal › Article
-
Mark
Influence of Manufacturing Error Tolerances on Thermal EHL Behavior of Gears
(
- Contribution to journal › Article
-
Mark
An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles
(
- Contribution to journal › Article
-
Mark
Optimum dog-leg angle for mass and bearing force optimization of multistage gear reduction
2022) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 236(13). p.2795-2805(
- Contribution to journal › Scientific review
-
Mark
A Mesoscopic Simulation Approach Based on Metal Fibre Characterization Data to Evaluate Brake Friction Performance
(
- Contribution to journal › Article
-
Mark
Airborne Wear Particles from Dry Clutches
(
- Contribution to journal › Article
-
Mark
Experimental and numerical analysis of laminated carbon fibre-reinforced polymer gears with implicit model for coefficient-of-friction evaluation
(
- Contribution to journal › Article
- 2021
-
Mark
Laser Cladding Treatment for Refurbishing Disc Brake Rotors : Environmental and Tribological Analysis
(
- Contribution to journal › Article
-
Mark
Improvement of tool utilization when hard turning with cBN tools at varying process parameters
(
- Contribution to journal › Article
-
Mark
A comprehensive study on cutting mechanisms and surface integrity of AISI 304 when turning a curved surface
(
- Contribution to journal › Article
-
Mark
Tribology and airborne particle emission of laser-cladded fe-based coatings versus non-asbestos organic and low-metallic brake materials
(
- Contribution to journal › Article
-
Mark
Tooth bending strength of gears with a progressive curved path of contact
(
- Contribution to journal › Article
-
Mark
Failure modes and life prediction model for high-speed bearings in a through-flow universal motor
(
- Contribution to journal › Article
-
Mark
Input parameters for airborne brake wear emission simulations : A comprehensive review
(
- Contribution to journal › Article
-
Mark
Mechanism-Based Modelling of Wear in Sheet-Bulk Metal Forming
2021) p.434-457(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Influence of manufacturing error tolerances on contact pressure in gears
2021) In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235(20). p.5173-5185(
- Contribution to journal › Article
-
Mark
Gear tolerancing for simultaneous optimization of transmission error and contact pressure
(
- Contribution to journal › Article
-
Mark
Simulation of wear and effective friction properties of microstructured surfaces
(
- Contribution to journal › Article
-
Mark
Determination of coefficients of friction for laminated veneer lumber on steel under high pressure loads
(
- Contribution to journal › Article
-
Mark
Cryogenic and hybrid induction-assisted machining strategies as alternatives for conventional machining of refractory tungsten and niobium
(
- Contribution to journal › Article
- 2020
-
Mark
Recycling of worn out brake pads ‒ impact on tribology and environment
(
- Contribution to journal › Article
-
Mark
A study of the effect of brake pad scorching on tribology and airborne particle emissions
(
- Contribution to journal › Article
-
Mark
A Comparison of Airborne Particles Generated from Disk Brake Contacts : Induction Versus Frictional Heating
(
- Contribution to journal › Article
-
Mark
A proposed driving cycle for brake emissions investigation for test stand
2020) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 234(1). p.122-135(
- Contribution to journal › Article
-
Mark
Lubrication characteristics of wax esters from oils produced by a genetically-enhanced oilseed crop
(
- Contribution to journal › Article
-
Mark
Grey Cast iron brake discs laser cladded with nickel-tungsten carbide-friction, wear and airborne wear particle emission
(
- Contribution to journal › Article
-
Mark
On black carbon emission from automotive disc brakes
(
- Contribution to journal › Article
-
Mark
Airborne wear particle emissions produced during the dyno bench tests with a slag containing semi-metallic brake pads
(
- Contribution to journal › Article
-
Mark
Special issue editorial : Study of brake wear particle emissions
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Patterns in online measurements of airborne fluorescent particles in the south of Sweden
2020) European Aerosol Conference, 2020(
- Contribution to conference › Other
-
Mark
Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718
(
- Contribution to journal › Article
-
Mark
Surface forces between bottlebrush polymer layers
(
- Contribution to journal › Scientific review
-
Mark
Friction, wear and airborne particle emission from Cu-free brake materials
(
- Contribution to journal › Article
- 2019
-
Mark
A comparison of airborne wear particle emission models based on metro station measurements
(
- Contribution to conference › Paper, not in proceeding
-
Mark
A pin-on-disc tribometer study of friction at low contact pressures and sliding speeds for a disc brake material combination
(
- Contribution to journal › Article
-
Mark
A multi-scale simulation approach to investigate local contact temperatures for commercial Cu-full and Cu-free brake pads
(
- Contribution to journal › Article
-
Mark
A test stand study on the volatile emissions of a passenger car brake assembly
(
- Contribution to journal › Article
-
Mark
Simulation of contact area and pressure dependence of initial surface roughness for cermet-coated discs used in disc brakes
(
- Contribution to journal › Article
-
Mark
Towards a two-part train traffic emissions factor model for airborne wear particles
(
- Contribution to journal › Article
-
Mark
Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries
(
- Contribution to journal › Article
-
Mark
Load effect on scratch micro-mechanisms of solution strengthened Compacted Graphite Irons
(
- Contribution to journal › Article
-
Mark
Experimental analysis of cutting edge effects on vibrations in end milling
(
- Contribution to journal › Article
-
Mark
Eco Design of Brake Pads with Recycled Friction Materials
2019) Eurobrake 2019(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A pendulum RIG study on airborne transmission and migration of particles from artificial football turf
(
- Contribution to conference › Paper, not in proceeding
-
Mark
A Wear Detection Parameter for the Wheel–Rail Contact Based on Emitted Noise
(
- Contribution to journal › Article
-
Mark
A PIN-ON-DISC STUDY ON THE FRICTION, WEAR AND AIRBORNE PARTICLE EMISSION FROM RECYCLED BRAKE PAD MATERIAL
2019) Eurobrake 2019(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An FEA approach to simulate disc brake wear and airborne particle emissions
(
- Contribution to journal › Article
-
Mark
A pin-on-disc study on the tribology of cast iron, sinter and composite railway brake blocks at low temperatures
(
- Contribution to journal › Article
- 2018
-
Mark
Development of a simulation model to study tool loads in pcBN when machining AISI 316L
(
- Contribution to journal › Article
-
Mark
Prediction of the cutting forces in gear hobbing and the wear behaviour of the individual hob cutting teeth
(
- Contribution to journal › Article
-
Mark
A friction, wear and emission tribometer study of non-asbestos organic pins sliding against alsic mmc discs
(
- Contribution to journal › Article
-
Mark
Scaling effects of measuring disc brake airborne particulate matter emissions – A comparison of a pin-on-disc tribometer and an inertia dynamometer bench under dragging conditions
2018) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 232(12). p.1538-1547(
- Contribution to journal › Article
-
Mark
On the influence of car brake system parameters on particulate matter emissions
(
- Contribution to journal › Article
-
Mark
A concept for reducing PM10 emissions for car brakes by 50%
(
- Contribution to journal › Article
-
Mark
Minimum quantity lubrication (MQL) with carbon nanostructured additives in sheet metal forming
(
- Contribution to journal › Article
-
Mark
Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Railway Open System Tribology
2018)(
- Thesis › Doctoral thesis (compilation)
-
Mark
A numerical study of disc brake wear dependence of rotor surface parameters
2018) EUROBRAKE 2018(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A pin-on-disc study of airborne wear particle emissions from studded tyre on concrete road contacts
(
- Contribution to journal › Article
-
Mark
Effect of humidity on the tribological behaviour and airborne particle emissions of railway brake block materials
(
- Contribution to journal › Article
- 2017
-
Mark
An integrated cost model for metal cutting operations based on engagement time and a cost breakdown approach
(
- Contribution to journal › Article
-
Mark
Nano-Scratching resistance of high-chromium white cast iron and its correlation with wear of cBN tool in machining
(
- Contribution to journal › Article
-
Mark
Kinematics for unilateral constraints in multibody dynamics
(
- Contribution to journal › Article
-
Mark
Assessment of Commonly used Tool Life Models in Metal Cutting
(
- Contribution to journal › Article
-
Mark
Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools
(
- Contribution to journal › Article
-
Mark
Computational homogenisation for thermoviscoplasticity : application to thermally sprayed coatings
(
- Contribution to journal › Article
-
Mark
Surface topography characterization of brass alloys: lead brass (CuZn39Pb3) and lead free brass (CuZn21Si3P)
(
- Contribution to journal › Article
-
Mark
Contact pressure and sliding velocity maps of the friction, wear and emission from a low-metallic/cast-iron disc brake contact pair
(
- Contribution to journal › Article
-
Mark
On the running-in of brake pads and discs for dyno bench tests
(
- Contribution to journal › Article
-
Mark
Ombordmätningar av partiklar och koldioxid i X60B förarhytter
2017)(
- Book/Report › Report
-
Mark
Ranking of conventional and novel disc brake materials with respect to airborne particle emissions
2017)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.122-127(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental and Numerical Investigation of Burr Formation in Intermittent Turning of AISI 4140
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.37-42(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Open System Tribology in the Wheel-Rail Contact-A Literature Review
(
- Contribution to journal › Article
-
Mark
Modeling of Force Build-up Process and Optimization of Tool Geometry when Intermittent Turning
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.393-398(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The Influence the Uncut Chip Thickness has on the Stagnation Point in Orthogonal Cutting
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.13-18(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A CFD study of a pin-on-disc tribometer setup focusing on airborne particle sampling efficiency
2017) 6th European Conderence on Tribology, ECOTRIB 2017(
- Contribution to conference › Abstract
-
Mark
A pin-on-disc tribometer study of disc brake contact pairs with respect to wear and airborne particle emissions
(
- Contribution to journal › Article
-
Mark
Towards the ranking of airborne particle emissions from car brakes - A system approach
2017) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 231(6). p.781-797(
- Contribution to journal › Article
- 2016
-
Mark
A Factorial Design to Numerically Study the Effects of Brake Pad Properties on Friction and Wear Emissions
(
- Contribution to journal › Article
-
Mark
Towards a test stand for standardized measurements of the brake emissions
2016) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 230(11). p.1521-1528(
- Contribution to journal › Article
-
Mark
The Contribution of Iron Oxides to theWet-Rail Phenomenon
2016) Third International Conference on Railway Technology: Research, Development and Maintenance 110.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Could pin-on-disc tribometers be used to study the friction/wear performance of disc brake materials?
2016) EUROBRAKE 2016(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A noise related track maintenance tool for severe wear detection of wheel-rail contact
2016) Third International Conference on Railway Technology: Research, Development and Maintenance In Civil-Comp Proceedings 110.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The effect of Subzero temperature and snow on the tribology of wheel-rail contact
2016) Third International Conference on Railway Technology: Research, Development and Maintenance In Civil-Comp Proceedings 110.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Open system tribology and influence of weather condition
(
- Contribution to journal › Article
- 2015
-
Mark
A comparison of measured and simulated friction, wear, and particle emission of disc brakes
(
- Contribution to journal › Article
-
Mark
A field study of airborne particle emissions from automotive disc brakes
2015) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 229(6). p.747-757(
- Contribution to journal › Article
-
Mark
Development of a noise related track maintenance tool
2015) 22nd International Congress on Sound and Vibration, ICSV 2015(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the relationships among wheel-rail surface topography, interface noise and tribological transitions
(
- Contribution to journal › Article
-
Mark
Wear between wheel and rail : A pin-on-disc study of environmental conditions and iron oxides
(
- Contribution to journal › Article
-
Mark
Mapping the friction between railway wheels and rails focusing on environmental conditions
(
- Contribution to journal › Article
- 2014
-
Mark
Towards a cellular automaton to simulate friction, wear, and particle emission of disc brakes
(
- Contribution to journal › Article
- 2013
-
Mark
Effect of aluminum on microstructure and properties of martensitic wear-resistant and heat-resistant steel
(
- Contribution to journal › Article
-
Mark
Microstructural and properties evolution of austenitic heat resistant steel after addition of aluminium
(
- Contribution to journal › Article
- 2012
-
Mark
A pin-on-disc study focusing on how different load levels affect the concentration and size distribution of airborne wear particles from the disc brake materials
(
- Contribution to journal › Article
- 2011
-
Mark
The tribological efficiency and the mechanism of action of nano-porous composition base brake lining materials
2011) 1st International Congress on Advances in Applied Physics and Materials Science, APMAS2011 In AIP Conference Proceedings 1400. p.546-554(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A study of airborne wear particles generated from organic railway brake pads and brake discs
(
- Contribution to journal › Article
-
Mark
A pin-on-disc investigation of novel nanoporous composite-based and conventional brake pad materials focussing on airborne wear particles
(
- Contribution to journal › Article
-
Mark
A cellular automaton approach to numerically simulate the contact situation in disc brakes
(
- Contribution to journal › Article
- 2010
-
Mark
Ultrafine particle formation from wear
(
- Contribution to journal › Article
-
Mark
Size, shape, and elemental composition of airborne wear particles from disc brake materials
(
- Contribution to journal › Article
-
Mark
Airborne wear particles from passenger car disc brakes : A comparison of measurements from field tests, a disc brake assembly test stand, and a pin-on-disc machine
2010) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224(2). p.179-188(
- Contribution to journal › Article
-
Mark
A pin-on-disc simulation of airborne wear particles from disc brakes
(
- Contribution to journal › Article
- 2009
-
Mark
Simulation of airborne wear particles from disc brakes
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A disc brake test stand for measurement of airborne wear particles
(
- Contribution to journal › Article