Department of Energy Sciences
251 – 500 of 2761
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2022
-
Mark
Temperature-Dependent Study for Electrochemical Surface Area on a Catalyst Layer Used in a PEFC
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of swirler blade angle and actuator applied voltage on combustion characteristics and cooling effectiveness
(
- Contribution to journal › Article
-
Mark
竖直矩形通道内超临界正癸烷振荡特性的大涡模拟
2022) In Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics 54(2). p.281-289(
- Contribution to journal › Article
-
Mark
An experimental investigation on the thermal augmentation of internal endwall in a two-pass duct using an array of delta-winglet vortex generator pair
(
- Contribution to journal › Article
-
Mark
Flame characteristics of methane/air with hydrogen addition in the micro confined combustion space
(
- Contribution to journal › Article
-
Mark
Thermal performance in latticework ducts with various endwall shapes for aero-craft turbine cooling
(
- Contribution to journal › Article
-
Mark
Microfluidic Hydrodynamic of Gas-Liquid flow in Single Microchannel and Porous Media with Microchannel Network
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Hydrodynamics of gas-liquid displacement in porous media: fingering pattern evolution at the breakthrough moment and the steady state
(
- Contribution to journal › Article
-
Mark
Numerical modelling of biomass thermochemical conversion and potassium release
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
基于飞秒激光的一维速度场测量方法
(
- Contribution to journal › Article
-
Mark
Transient Flow and Heat Transfer in a Horizontal Rectangular Channel Considering Thermal-Fluid-Structure Interaction
(
- Contribution to journal › Article
-
Mark
Large Eddy Simulation of Combustion for High-Speed Airbreathing Engines
(
- Contribution to journal › Article
-
Mark
Numerical Simulations of Spray Combustion in Jet Engines
(
- Contribution to journal › Article
-
Mark
Impact of Methane and Hydrogen-Enriched Methane Pilot Injection on the Surface Temperature of a Scaled-Down Burner Nozzle Measured Using Phosphor Thermometry
(
- Contribution to journal › Article
-
Mark
Urban Sustainability : Recovering and Utilizing Urban Excess Heat
(
- Contribution to journal › Article
-
Mark
Large-eddy simulation of the injection timing effects on the dual-fuel spray flame
(
- Contribution to journal › Article
-
Mark
Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids
(
- Contribution to journal › Article
-
Mark
Comparative Analysis of Flow and Heat Transfer for Vehicular Independent Cooling Modules
(
- Contribution to journal › Article
-
Mark
AN EXPERIMENTAL STUDY ON HEAT TRANSFER PERFORMANCE OF JET IMPINGEMENT ARRAYS
2022) ASME 2022 Heat Transfer Summer Conference, HT 2022 In Proceedings of ASME 2022 Heat Transfer Summer Conference, HT 2022(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Infrared Drying Characteristics and Quality Variations of Lily Bulbs Under Blanching Pretreatment
(
- Contribution to journal › Article
-
Mark
Fundamentals and Applications of Hydrogen and Fuel Cells
2022) p.73-101(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Effects of ambient CO2 and H2O on soot processes in n-dodecane spray combustion using large eddy simulation
(
- Contribution to journal › Article
-
Mark
The condensation characteristics of individual droplets during dropwise condensation
(
- Contribution to journal › Article
-
Mark
Development of an empirical test method to quantify the ɸ-sensitivity of liquid fuels
(
- Contribution to journal › Article
-
Mark
Flame structure and burning velocity of ammonia/air turbulent premixed flames at high Karlovitz number conditions
(
- Contribution to journal › Article
-
Mark
Particle emissions from a modern heavy-duty diesel engine as ice nuclei in immersion freezing mode: a laboratory study on fossil and renewable fuels
(
- Contribution to journal › Article
-
Mark
Lung function and self-rated symptoms in healthy volunteers after exposure to hydrotreated vegetable oil (HVO) exhaust with and without particles
(
- Contribution to journal › Article
-
Mark
Local Measurements in Heat Exchangers : A Systematic Review and Regression Analysis
(
- Contribution to journal › Article
-
Mark
Rheological behaviour of IoNanofluids based on [emim][DCA] and [emim][TCM]
(
- Contribution to journal › Article
-
Mark
Y2Mo3O12–Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathode catalyst for proton-conducting solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Étude des performances et optimisation de la conception de nouveaux compresseurs rotatifs à palettes coulissantes à cylindre rotatif
(
- Contribution to journal › Article
-
Mark
Heat exchanger network synthesis considering detailed thermal-hydraulic performance : Methods and perspectives
(
- Contribution to journal › Scientific review
-
Mark
EFFECTS OF INTERNAL COOLANT CROSSFLOW ON FILM-COOLING PERFORMANCE OF DOUBLE-JET AND CYLINDRICAL HOLES
2022) ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022 In Proceedings of the ASME Turbo Expo 6-A.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
NUMERICAL ANALYSIS OF AN AXIAL HIGH PRESSURE PARTIAL ADMISSION TURBINE
2022) ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022 In Proceedings of the ASME Turbo Expo 10-B.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Intensification of heat transfer behind the backward-facing step using tabs
(
- Contribution to journal › Article
-
Mark
Synthesis and experimental study of improved double perovskite-type PrBaCo2O5+δ materials to produce oxygen-enriched CO2 for oxyfuel combustion application
(
- Contribution to journal › Article
-
Mark
De unga gör helt rätt när de stämmer staten
2022) In Aftonbladet(
- Contribution to specialist publication or newspaper › Newspaper article
-
Mark
Low Load Ignitability of Methanol in a Heavy-Duty Compression Ignition Engine
2022) SAE 2022 Powertrains, Fuels and Lubricants Conference and Exhibition, PFL 2022 In SAE Technical Papers(
- Contribution to journal › Article
-
Mark
Large Eddy Simulation of Ramjet to Scramjet Transition
2022) 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 In 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 6. p.4513-4527(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
MULTIDISCIPLINARY ASSESSMENT OF A YEAR 2035 TURBOFAN PROPULSION SYSTEM
2022) 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 In 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 7. p.4981-4990(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
LES of Combustion Dynamics in an Ethylene-Hydrogen-Air Ramjet
2022) 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 In 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 7. p.4903-4919(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis and Development of Integrated Low-Pressure Shaft Generator
2022) 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 In 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 8. p.5956-5972(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
EXPERIMENTAL STUDY ON HEAT TRANSFER ENHANCEMENT OF AIR JET IMPINGEMENT FOR ELECTRONICS THERMAL MANAGEMENT
(
- Contribution to journal › Article
-
Mark
Study on ignition process and flame expansion and propagation characteristics in jet-cooled pilot flameholders using image processing techniques
(
- Contribution to journal › Article
-
Mark
Parametric Study on Thermo-Hydraulic Performance of NACA Airfoil Fin PCHEs Channels
(
- Contribution to journal › Article
-
Mark
Assessment of grid/filter size dependence in large eddy simulation of high-pressure spray flames
(
- Contribution to journal › Article
-
Mark
Experimental study of the effect of air split ratio on thermoacoustic instability in a centrally-staged swirl burner
(
- Contribution to journal › Article
-
Mark
Large eddy simulation of transient combustion and soot recession in the ECN Spray A and D flames
(
- Contribution to journal › Article
-
Mark
Thermal management performance improvement of phase change material for autonomous underwater vehicles' battery module by optimizing fin design based on quantitative evaluation method
(
- Contribution to journal › Article
-
Mark
Heat transfer and field synergy characteristics in a rectangular unit channel under mechanical vibration
(
- Contribution to journal › Article
-
Mark
Enhancement of phase change materials by nanoparticles to improve battery thermal management for autonomous underwater vehicles
(
- Contribution to journal › Article
-
Mark
Progress and challenges on the thermal management of electrochemical energy conversion and storage technologies : Fuel cells, electrolysers, and supercapacitors
(
- Contribution to journal › Scientific review
-
Mark
A detailed study on the micro-explosion of burning iron particles in hot oxidizing environments
(
- Contribution to journal › Article
- 2021
-
Mark
Comparative analysis on the film cooling mechanisms of elliptical and cylindrical holes with 90° compound angle
(
- Contribution to journal › Article
-
Mark
Heat Transfer and Secondary Flow Characteristics in a Horizontally Round Pipe for Cooling a Scramjet Combustor by Supercritical n-Decane
(
- Contribution to journal › Article
-
Mark
On the topology of vortex structures and heat transfer of a gas turbine blade internal tip with different arrangement of delta-winglet vortex generators
(
- Contribution to journal › Article
-
Mark
Vortical structures and heat transfer augmentation of a cooling channel in a gas turbine blade with various arrangements of tip bleed holes
(
- Contribution to journal › Article
-
Mark
Optical characterization of methanol compression-ignition combustion in a heavy-duty engine
(
- Contribution to journal › Article
-
Mark
The transport and thermodynamic characteristics of thermally oscillating phenomena in a buoyancy-driven supercritical fuel flow
(
- Contribution to journal › Article
-
Mark
Entropy Study on the Enhanced Heat Transfer Mechanism of the Coupling of Detached and Spiral Vortex Fields in Spirally Corrugated Tubes
(
- Contribution to journal › Article
-
Mark
Numerical study on K/S/Cl release during devolatilization of pulverized biomass at high temperature
(
- Contribution to journal › Article
-
Mark
Assessment of an Evolution Equation for the Displacement Speed of a Constant-Density Reactive Scalar Field
(
- Contribution to journal › Article
-
Mark
Film cooling in the trailing edge cutback with different land shapes and blowing ratios
(
- Contribution to journal › Article
-
Mark
A fault handling process for faults in district heating customer installations
(
- Contribution to journal › Article
-
Mark
Displacement speed analysis of surface propagation in moderately turbulent premixed reacting waves
(
- Contribution to journal › Article
-
Mark
Evolution equations for the decomposed components of displacement speed in a reactive scalar field
(
- Contribution to journal › Article
-
Mark
System behavior prediction by artificial neural network algorithm of a methanol steam reformer for polymer electrolyte fuel cell stack use
(
- Contribution to journal › Article
-
Mark
Large eddy simulation of dual-fuel combustion under ICE conditions
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Model optimization for autotuners in industrial control systems
2021) 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) p.1-4(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Next generation relay autotuners—analysis and implementation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Transport parameter correlations for digitally created PEFC gas diffusion layers by using openPNM
(
- Contribution to journal › Article
-
Mark
Experimental investigation on the thermo-hydraulic characteristics and occurrence boundary of geyser in a cryogenic pipe
(
- Contribution to journal › Article
-
Mark
On heat transfer and flow characteristics of jets impingement on a concave surface with varying pin-fin arrangements
(
- Contribution to journal › Article
-
Mark
Combustion sensitivity to the nozzle hole size in an active pre-chamber ultra-lean heavy-duty natural gas engine
(
- Contribution to journal › Article
-
Mark
Polymer-based Cu/Ag composite as seed layer on insulating substrate for copper addition of multi-dimensional conductive patterns
(
- Contribution to journal › Article
-
Mark
A-Asterisk Algorithm as an Alternative to Evaluate the Geometric Tortuosity in Digitally Created SOFC Anodes
2021) 17th International Symposium on Solid Oxide Fuel Cells, SOFC 2021 In ECS Transactions 103(1). p.1665-1671(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A novel pipe structure for geyser elimination in a vertical cryogenic pipe
(
- Contribution to journal › Article
-
Mark
Effect of thermal pyrolysis on heat transfer and upward flow characteristics in a rectangular channel using endothermic hydrocarbon fuel
(
- Contribution to journal › Article
-
Mark
Large eddy simulation of n-heptane/syngas pilot ignition spray combustion : Ignition process, liftoff evolution and pollutant emissions
(
- Contribution to journal › Article
-
Mark
A comprehensive review on the application of hybrid nanofluids in solar energy collectors
(
- Contribution to journal › Article
-
Mark
Heat transfer deterioration in upward and downward pipe flows of supercritical n-decane for actively regenerative cooling
(
- Contribution to journal › Article
-
Mark
Combining in-cylinder pressure and 1D simulation tools to understand the combustion characteristics of natural gas in pre-chamber ignition systems for energy generation
(
- Contribution to journal › Article
-
Mark
An LBM-based investigation of thermal buoyancy and arrangement angle on flow characteristics and heat transfer over four heated square cylinders
(
- Contribution to journal › Article
-
Mark
Thermal performance in a pin fin-dimple/protrusion duct with different optimal objectives
(
- Contribution to journal › Article
-
Mark
Special Section on Flow Physics of Supercritical Fluids in Engineering
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
The augmentation of internal tip heat transfer in gas turbine blades using a pair of delta-winglet vortex generators
(
- Contribution to journal › Article
-
Mark
A taxonomy for labeling deviations in district heating customer data
(
- Contribution to journal › Article
-
Mark
High conversion hydrogen peroxide microchannel reactors : Design and two-phase flow instability investigation
(
- Contribution to journal › Article
-
Mark
Combined experimental and numerical studies on flow characteristic and heat transfer in ribbed channels with vortex generators of various types and arrangements
(
- Contribution to journal › Article
-
Mark
Spot the difference! : On the way towards automated fault handling in district heating buildings
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Stochastic Set-Point Optimization for In-Cycle Closed-Loop Combustion Control Operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modular Design and Integration of In-Cycle Closed-Loop Combustion Controllers for a Wide-Range of Operating Conditions
2021) 2021 American Control Conference, ACC 2021 In Proceedings of the American Control Conference 2021-May. p.1875-1881(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Quantication of FPGA Requirements for Closed-Loop Combustion Control Implementation
2021) ICE 2021 15th International Conference on Engines & Vehicles(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Efficiency Optimization by In-Cycle Closed-Loop Combustion Control
2021) In Control Engineering Practice(
- Contribution to journal › Article
-
Mark
Design and Optimization of In-Cycle Closed-Loop Combustion Control with Multiple Injections
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Predictive In-Cycle Closed-Loop Combustion Control with Pilot-Main Injections
(
- Contribution to journal › Article
-
Mark
Flow structure and heat transfer characteristics in a ribbed two-pass channel with varying divider inclination angle
(
- Contribution to journal › Article
-
Mark
Assessment of a flamelet approach to evaluating mean species mass fractions in moderately and highly turbulent premixed flames
(
- Contribution to journal › Article
-
Mark
Modelling and controlling of polymer electrolyte fuel cell systems
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
截断肋排布方式对内冷通道换热性能的影响
2021) In Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics 53(4). p.504-512(
- Contribution to journal › Article
-
Mark
Improving the calculation of evaporating sprays for medium-speed marine-engine-like conditions
(
- Contribution to journal › Article
-
Mark
Heat transfer in the trailing region of gas turbines – A state-of-the-art review
(
- Contribution to journal › Article
-
Mark
Potassium release from biomass particles during combustion—real-time in situ tdlas detection and numerical simulation
(
- Contribution to journal › Article
-
Mark
Coating engineering for boiling heat transfer toward immersion cooling
2021) In Advances in Heat Transfer(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Investigation on the elimination of geyser in a cryogenic pipe by a recirculation method
(
- Contribution to journal › Article
-
Mark
Numerical Study of the Influence of Turbulence-Chemistry Interaction on URANS Simulations of Diesel Spray Flame Structures under Marine Engine-like Conditions
(
- Contribution to journal › Article
-
Mark
Analysis on breakup dynamics of hydrogen taylor bubble formation in a cross-junction microchannel
(
- Contribution to journal › Article
-
Mark
Development of a fast-virtual CFR engine model and its use on autoignition studies
(
- Contribution to journal › Article
-
Mark
Combustion and Emission Characteristics of Ammonia under Conditions Relevant to Modern Gas Turbines
(
- Contribution to journal › Article
-
Mark
Toward computationally effective modeling and simulation of droplet formation in microchannel junctions
(
- Contribution to journal › Article
-
Mark
Combined experimental and numerical investigations on heat transfer augmentation in truncated ribbed channels designed by adopting fractal theory
(
- Contribution to journal › Article
-
Mark
Experimental and numerical investigations of heat transfer and fluid flow in a rectangular channel with perforated ribs
(
- Contribution to journal › Article
-
Mark
On heat transfer and flow characteristics of jets impinging onto concave surface with varying bleeding arrangements
(
- Contribution to journal › Article
-
Mark
Transient numerical modeling and model predictive control of an industrial-scale steam methane reforming reactor
(
- Contribution to journal › Article
-
Mark
Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder
(
- Contribution to journal › Article
-
Mark
Hydraulic and heat transfer characteristics in structured packed beds with methane steam reforming reaction for energy storage
(
- Contribution to journal › Article
-
Mark
Sliding Mode Control on Receding Horizon : Practical Control Design and Application
(
- Contribution to journal › Article
-
Mark
Numerical simulation of solid oxide fuel cells comparing different electrochemical kinetics
(
- Contribution to journal › Article
-
Mark
A multi-input and single-output voltage control for a polymer electrolyte fuel cell system using model predictive control method
(
- Contribution to journal › Article
-
Mark
Effects of renewable fuel and exhaust aftertreatment on primary and secondary emissions from a modern heavy-duty diesel engine
(
- Contribution to journal › Article
-
Mark
Towards a comprehensive optimization of engine efficiency and emissions by coupling artificial neural network (ANN) with genetic algorithm (GA)
(
- Contribution to journal › Article
-
Mark
Effects of hole configuration on film cooling effectiveness and particle deposition on curved surfaces in gas turbines
(
- Contribution to journal › Article
-
Mark
LES of H2-air jet combustion in high enthalpy supersonic crossflow
(
- Contribution to journal › Article
-
Mark
Enhanced thermal management by introducing nanoparticle composite phase change materials for cooling multiple heat sources systems
(
- Contribution to journal › Article
-
Mark
Characteristics of BrC and BC emissions from controlled diffusion flame and diesel engine combustion
(
- Contribution to journal › Article
-
Mark
Enhanced heat transfer research in liquid-cooled channel based on piezoelectric vibrating cantilever
(
- Contribution to journal › Article
-
Mark
Pool Boiling of NOVEC-649 on Microparticle-Coated and Nanoparticle-Coated Surfaces
(
- Contribution to journal › Article
-
Mark
Investigation of Heat Transfer Characteristics of Al2O3-Water Nanofluids in an Electric Heater
(
- Contribution to journal › Article
-
Mark
Impact of discharge port configurations on the performance of sliding vane rotary compressors with a rotating cylinder
(
- Contribution to journal › Article
-
Mark
Experimental Investigation of Plasma Discharge Effect on Swirl Flames at a Scaled Siemens Dry Low Emission Burner
2021) AIAA Scitech 2021 Forum(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Subgrid models, reaction mechanisms, and combustion models in large-eddy simulation of supersonic combustion
(
- Contribution to journal › Article
-
Mark
Effects of ambient pressure and nozzle diameter on ignition characteristics in diesel spray combustion
(
- Contribution to journal › Article
-
Mark
Dehydrogenation mechanisms of liquid organic hydrogen carriers over Pt, Pd, Rh, and Ni surfaces : Cyclohexane as a model compound
(
- Contribution to journal › Article
-
Mark
Flow Characteristics and Heat Transfer of Supercritical n-decane in Novel Nested Channels for Scramjet Regenerative Cooling
(
- Contribution to journal › Article
-
Mark
Investigation of turbulent premixed methane/air and hydrogen-enriched methane/air flames in a laboratory-scale gas turbine model combustor
(
- Contribution to journal › Article
-
Mark
Numerical and experimental investigation of a gasturbine model combustor with axial swirler
2021)(
- Thesis › Licentiate thesis
-
Mark
Numerical study of the combustion and application of SNCR for NOx reduction in a lab-scale biomass boiler
(
- Contribution to journal › Article
-
Mark
Analyses of thermal performance and pressure drop in a plate heat exchanger filled with ferrofluids under a magnetic field
(
- Contribution to journal › Article
-
Mark
Predicting neurological outcome after out-of-hospital cardiac arrest with cumulative information; development and internal validation of an artificial neural network algorithm
(
- Contribution to journal › Article
-
Mark
Analysis of Thermal Stress in a Solid Oxide Fuel Cell Due to the Sulfur Poisoning Interface of the Electrolyte and Cathode
(
- Contribution to journal › Article
-
Mark
Application of infrared radiation in the drying of food products
(
- Contribution to journal › Scientific review
-
Mark
On the solar air heater thermal enhancement and flow topology using differently shaped ribs combined with delta-winglet vortex generators
(
- Contribution to journal › Article
-
Mark
Performance investigation on the novel anti-leakage and easy-to-manufacture trisection helical baffle electric heaters
(
- Contribution to journal › Article
-
Mark
Large-eddy simulation of n-dodecane spray flame : Effects of nozzle diameters on autoignition at varying ambient temperatures
(
- Contribution to journal › Article
-
Mark
Endwall film cooling holes design upstream of the leading edge of a turbine vane
(
- Contribution to journal › Article
-
Mark
Investigation of evaporating sprays in a medium speed marine engine
(
- Contribution to journal › Article
-
Mark
LES study of diesel flame/wall interaction and mixing mechanisms at different wall distances
(
- Contribution to journal › Article
-
Mark
LES/TPDF investigation of the effects of ambient methanol concentration on pilot fuel ignition characteristics and reaction front structures
(
- Contribution to journal › Article
-
Mark
A high temperature turbine blade heat transfer multilevel design platform
(
- Contribution to journal › Article
-
Mark
FPGA Implementation of In-Cycle Closed-Loop Combustion Control Methods
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of various coolants on flow and heat transfer characteristics in a round-tip pin-finned internal channel
(
- Contribution to journal › Article
-
Mark
Stratofly mr3 – how to reduce the environmental impact of high-speed transportation
2021) AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2021 In AIAA Scitech 2021 Forum p.1-21(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Soot Oxidation Studies in an Optical Diesel Engine Using Laser-Induced Incandescence and Extinction : The Effects of Injector Aging and Fuel Additive
(
- Contribution to journal › Article
-
Mark
Influences of accelerating states on supercritical n-decane heat transfer in a horizontal tube applied for scramjet engine cooling
(
- Contribution to journal › Article
-
Mark
Preparation and thermophysical property analysis of nanocomposite phase change materials for energy storage
(
- Contribution to journal › Article
-
Mark
Numerical simulation of a mixed-mode reaction front in a PPC engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Advances in Fluid and Thermal Engineering : Select Proceedings of FLAME 2020
2021) In Lecture Notes in Mechanical Engineering(
- Book/Report › Book
-
Mark
H2020 STRATOFLY PROJECT : FROM EUROPE TO AUSTRALIA IN LESS THAN 3 HOURS
2021) 32nd Congress of the International Council of the Aeronautical Sciences, ICAS 2021(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Coriolis and buoyancy effects on heat transfer in viewpoint of field synergy principle and secondary flow intensity for maximization of internal cooling
(
- Contribution to journal › Article
-
Mark
An optical investigation of dual fuel and RCCI pilot ignition in a medium speed engine
(
- Contribution to journal › Article
-
Mark
Effects of Particle Size and Mainstream Inlet Angle on Deposition in a Turbine Cascade
(
- Contribution to journal › Article
-
Mark
Attosecond photoionization dynamics in the vicinity of the Cooper minima in argon
(
- Contribution to journal › Article
-
Mark
Laminar burning velocity of lean methane/air flames under pulsed microwave irradiation
(
- Contribution to journal › Article
-
Mark
What dominates heat transfer performance of a double-pipe heat exchanger
(
- Contribution to journal › Article
-
Mark
Parameter study of laminar flow and heat transfer in an interrupted microchannel heat sink with ribs
(
- Contribution to journal › Article
-
Mark
3D gas-liquid interfaces and flow characteristics of two-phase flows in horizontal tubes
2021) 8th European Thermal Sciences Conference, EUROTHERM 2021 In Journal of Physics: Conference Series 2116.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Bubble dynamics and mechanistic boiling heat transfer prediction on a scored copper surface
2021) 8th European Thermal Sciences Conference, EUROTHERM 2021 In Journal of Physics: Conference Series 2116.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of an Annular Piston Bowl-Rim Cavity on In-Cylinder and Engine-Out Soot of a Heavy-Duty Optical Diesel Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental study of gas-Liquid Mass transfer in a rectangular microchannel by digital image analysis method
2021) ASME 2021 International Mechanical Engineering Congress and Exposition(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Ignitability Study of a Spark-ignited Heavy-duty Engine, fueled with Natural Gas (CNG)
2021)(
- Thesis › Master's thesis
-
Mark
Structure and laminar flame speed of an ammonia/methane/air premixed flame under varying pressure and equivalence ratio
(
- Contribution to journal › Article
-
Mark
An investigation on early evolution of soot in n-dodecane spray combustion using large eddy simulation
(
- Contribution to journal › Article
-
Mark
Combustion characteristics of n-heptane spray combustion in a low temperature reform gas/air environment
(
- Contribution to journal › Article
-
Mark
非预混旋流火焰中部熄火及重新稳燃机理研究
(
- Contribution to journal › Article
-
Mark
Recent Development in Numerical Simulations and Experimental Studies of Biomass Thermochemical Conversion
(
- Contribution to journal › Scientific review
-
Mark
Experimental and Kinetic Investigation of Stoichiometric to Rich NH3/H2/Air Flames in a Swirl and Bluff-Body Stabilized Burner
(
- Contribution to journal › Article
-
Mark
Continuum scale modelling and complementary experimentation of solid oxide cells
(
- Contribution to journal › Scientific review
-
Mark
Investigation of complex flow and heat transfer mechanism in multi-tube heat exchanger with different arrangement corrugated tube
(
- Contribution to journal › Article
-
Mark
The greenhouse gas emissions of an electrified vehicle combined with renewable fuels: Life cycle assessment and policy implications
(
- Contribution to journal › Article
-
Mark
Parametric study for electrode microstructure influence on SOFC performance
(
- Contribution to journal › Article
-
Mark
Nanoparticle-Assisted Pool Boiling Heat Transfer on Micro-Pin-Fin Surfaces
(
- Contribution to journal › Article
- 2020
-
Mark
Enhanced heat transfer in a labyrinth channels with ribs of different shape
(
- Contribution to journal › Article
-
Mark
Experimental investigation on heat transfer characteristics of various nanofluids in an indoor electric heater
(
- Contribution to journal › Article
-
Mark
Polymer electrolyte fuel cell modeling - A comparison of two models with different levels of complexity
(
- Contribution to journal › Article
-
Mark
Numerical investigation on the impact of membrane thickness on transport phenomena in PEM fuel cells
(
- Contribution to journal › Article
-
Mark
Optical Diagnostics for Engine Efficiency in Gasoline Compression Ignition
2020)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Flame investigations of a laboratory-scale CECOST swirl burner at atmospheric pressure conditions
(
- Contribution to journal › Article
-
Mark
Special issue : Smart flow control at the micro scale
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Performance of new and aged injectors with and without fuel additives in a light duty diesel engine
(
- Contribution to journal › Article
-
Mark
High-Speed Imaging of Spray Formation and Combustion in an Optical Engine : Effects of Injector Aging and TPGME as a Fuel Additive
(
- Contribution to journal › Article
-
Mark
A numerical study of heat transfer effects and aerodynamic noise reduction in superheated steam flow passing a temperature and pressure regulation valve
(
- Contribution to journal › Article
-
Mark
Impact of Multiple Injection Strategies on Efficiency and Combustion Characteristics in an Optical PPC Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Transition from HCCI to PPC : Investigation of the Effect of Different Injection Timing on Ignition and Combustion Characteristics in an Optical PPC Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Impact of Multiple Injection Strategies on Performance and Emissions of Methanol PPC under Low Load Operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental and Numerical Assessment of Active Pre-chamber Ignition in Heavy Duty Natural Gas Stationary Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Model Predictive Control of an Advanced Multiple Cylinder Engine with Partially Premixed Combustion Concept
(
- Contribution to journal › Article
-
Mark
New supersonic loss model for the preliminary design of transonic turbine blades and the influence of pitch
(
- Contribution to journal › Article
-
Mark
Effect of wall conduction on the heat transfer characteristics of supercritical n-decane in a horizontal rectangular pipe for cooling of a scramjet combustor
(
- Contribution to journal › Article
-
Mark
Numerical studies of gas-liquid Taylor flows in vertical capillaries using CuO/water nanofluids
(
- Contribution to journal › Article
-
Mark
Structure and propagation of n-heptane/air premixed flame in low temperature ignition regime
(
- Contribution to journal › Article
-
Mark
Influence of alternating V-rows tube layout on thermal-hydraulic characteristics of twisted elliptical tube heat exchangers
(
- Contribution to journal › Article
-
Mark
Effect of renewable fuels and intake O2 concentration on diesel engine emission characteristics and reactive oxygen species (ROS) formation
(
- Contribution to journal › Article
-
Mark
Performance analysis of a plate heat exchanger using various nanofluids
(
- Contribution to journal › Article
-
Mark
LES/PDF modeling of swirl-stabilized non-premixed methane/air flames with local extinction and re-ignition
(
- Contribution to journal › Article
-
Mark
Systematic experimental study for optimized hydrogen production of Ni/CeO2 prepared by incipient wetness impregnation technique
(
- Contribution to journal › Article
-
Mark
LBM modeling and analysis on microchannel slip flow and heat transfer under different heating conditions
(
- Contribution to journal › Article
-
Mark
Numerical study of heat transfer in gravity-driven dense particle flow around a hexagonal tube
(
- Contribution to journal › Article
-
Mark
Combined two-phase co-flow and counter-flow in a gas channel/porous transport layer assembly
2020) Pacific Rim Meeting on Electrochemical and Solid State Science 2020, PRiME 200 In ECS Transactions 98(9). p.305-315(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of Injection Timing on Equivalence Ratio Stratification of Methanol and Isooctane in a Heavy-Duty Compression Ignition Engine
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
High Octane Number Fuels in Advanced Combustion Modes for Sustainable Transportation
2020)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions
(
- Contribution to journal › Article
-
Mark
Improvements of the adiabatic film cooling by using two-Row holes of different geometries and arrangements
(
- Contribution to journal › Article
-
Mark
Temperature Impact on the Internal Resistance of a Polymer Electrolyte Fuel Cell Considering the Electrochemical Impedance Spectroscopy Diagnosis
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal stress analysis at the interface of cathode and electrolyte in solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
A Detailed Analysis of Internal Resistance of a PEFC Comparing High and Low Humidification of the Reactant Gases
(
- Contribution to journal › Article
-
Mark
Spray combustion with multiple-injection in modern engine conditions
2020)(
- Thesis › Doctoral thesis (compilation)
-
Mark
基于等效等熵指数的燃烧始点实时反馈与控制
2020) In Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) 50(4). p.1160-1168(
- Contribution to journal › Article
-
Mark
Studies of gas-liquid two-phase flows in horizontal mini tubes using 3D reconstruction and numerical methods
(
- Contribution to journal › Article
-
Mark
Breakup dynamics of gas-liquid interface during Taylor bubble formation in a microchannel flow-focusing device
(
- Contribution to journal › Article
-
Mark
Breakup dynamics of low-density gas and liquid interface during Taylor bubble formation in a microchannel flow-focusing device
(
- Contribution to journal › Article
-
Mark
Partially premixed combustion optimization using double injection strategy in transient operation
(
- Contribution to journal › Article
-
Mark
Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC
(
- Contribution to journal › Article
-
Mark
Assessment of flow pattern and temperature profiles by residence time distribution in typical structured packed beds
(
- Contribution to journal › Article
-
Mark
Numerical investigation of particle deposition in film-cooled blade leading edge
(
- Contribution to journal › Article
-
Mark
Unified formula for the field synergy principle
(
- Contribution to journal › Article
-
Mark
基于旋流火焰根部熄火现象的FGM模型研究
(
- Contribution to journal › Article
-
Mark
Flow and thermal performance of supercritical n-decane in double-layer channels for regenerative cooling of a scramjet combustor
(
- Contribution to journal › Article
-
Mark
Numerical investigation of flow field and heat transfer characteristics in a latticework duct with jet cooling structures
(
- Contribution to journal › Article
-
Mark
Numerical investigations on the effect of convex-dimple streamwise arrangements on the flow and heat transfer characteristics of rectangular convex-dimple-grooved channels
(
- Contribution to journal › Article
-
Mark
Particle characterization and toxicity in C57BL/6 mice following instillation of five different diesel exhaust particles designed to differ in physicochemical properties
(
- Contribution to journal › Article
-
Mark
Thermodynamic and exergoeconomic analysis of a novel CO2 based combined cooling, heating and power system
(
- Contribution to journal › Article
-
Mark
Artificial neural networks improve early outcome prediction and risk classification in out-of-hospital cardiac arrest patients admitted to intensive care
(
- Contribution to journal › Article
-
Mark
Prediction of mass transfer coefficient of the continuous phase in a structured packed extraction column in the presence of SiO2 nanoparticles
(
- Contribution to journal › Article
-
Mark
Bayesian Method for Fuel Mass Estimation of Short Pilot Injections based on its Misfire Probability
2020) 2020 American Control Conference, ACC 2020 In Proceedings of the American Control Conference 2020-July. p.1507-1513(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of ambient methanol on pollutants formation in dual-fuel spray combustion at varying ambient temperatures : A large-eddy simulation
(
- Contribution to journal › Article
-
Mark
Effect of various surfactants on stability and thermophysical properties of nanofluids
2020) In Journal of Thermal Analysis and Calorimetry(
- Contribution to journal › Article
-
Mark
Preface : Supercritical carbon dioxide in thermal and energy sciences
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Temperature control strategy for polymer electrolyte fuel cells
(
- Contribution to journal › Article
-
Mark
Performance investigation on twisted elliptical tube heat exchangers with coupling-vortex square tube layout
(
- Contribution to journal › Article
-
Mark
A network model and numerical simulations of flow distributions in packed bed reactors with different packing structures
(
- Contribution to journal › Article
-
Mark
An improved method to visualize two regions of interest synchronously in microfluidics
(
- Contribution to journal › Article
-
Mark
A numerical study of partitioned fluid-structure interaction applied to a cantilever in incompressible turbulent flow
(
- Contribution to journal › Article
-
Mark
Application of ultrasound technology in the drying of food products
(
- Contribution to journal › Scientific review
-
Mark
Parametric study on flow characteristics and heat transfer in rectangular channels with strip slits in ribs on one wall
(
- Contribution to journal › Article
-
Mark
Dynamic modelling and controlling strategy of polymer electrolyte fuel cells
(
- Contribution to journal › Article
-
Mark
Multiple-objective optimization of methanol/diesel dual-fuel engine at low loads : A comparison of reactivity controlled compression ignition (RCCI) and direct dual fuel stratification (DDFS) strategies
(
- Contribution to journal › Article
-
Mark
Evaluation of Gasoline PPC in a Multi-cylinder Engine : Capabilities & Challenges
2020)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Renewable Methanol with Ignition Improver Additive for Diesel Engines
2020) In Energy and Fuels(
- Contribution to journal › Article
-
Mark
High-performance solid oxide fuel cells with fiber-based cathodes for low-temperature operation
(
- Contribution to journal › Article
-
Mark
Study of effects of axisymmetric endwall contouring on film cooling/heat transfer and secondary losses in a cascade of first stage nozzle guide vane
(
- Contribution to journal › Article