Department of Energy Sciences
501 – 750 of 2761
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2020
-
Mark
Transport dynamics of droplet impact on the wedge-patterned biphilic surface
(
- Contribution to journal › Article
-
Mark
Effects of molar expansion ratio of fuels on engine efficiency
(
- Contribution to journal › Article
-
Mark
On the effects of increased coolant temperatures of light duty engines on waste heat recovery
(
- Contribution to journal › Article
-
Mark
Optimization of fin configurations and layouts in a printed circuit heat exchanger for supercritical liquefied natural gas near the pseudo-critical temperature
(
- Contribution to journal › Article
-
Mark
Low Temperature Waste Heat Recovery in Internal Combustion Engines
2020)(
- Thesis › Doctoral thesis (compilation)
-
Mark
A novel technique for detailed and time-efficient combustion modeling of fumigated dual-fuel internal combustion engines
(
- Contribution to journal › Article
-
Mark
Performance and transport characteristics of solid oxide fuel cells with counter flow arrangement
(
- Contribution to journal › Article
-
Mark
Experimental investigation on micromixing characteristics of coaxial mixers in viscous system
(
- Contribution to journal › Article
-
Mark
Computational investigation of curvature effects on jet impingement heat transfer at internally cooled turbine vane leading edge regions
(
- Contribution to journal › Article
-
Mark
The effect of 2-ethyl-hexyl nitrate on HCCI combustion properties to compensate ethanol addition to gasoline
(
- Contribution to journal › Article
-
Mark
Large-eddy simulation of underexpanded natural gas jets
2020) 14th European Turbulence Conference, ETC 2013(
- Contribution to conference › Paper, not in proceeding
-
Mark
Improved modeling of heat transfer in dropwise condensation
(
- Contribution to journal › Article
-
Mark
On neural network modeling to maximize the power output of PEMFCs
(
- Contribution to journal › Article
-
Mark
Effect and optimization of backward hole parameters on film cooling performance by Taguchi method
(
- Contribution to journal › Article
-
Mark
Numerical studies of flame stabilization in burners relevant to gas turbine engines
2020)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Effects of different injection strategies on ignition and combustion characteristics in an optical PPC engine
(
- Contribution to journal › Article
-
Mark
A Study of Injector Aging Effects on the Spray and Combustion in a Diesel Engine
2020)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Synthesis and experimental study of novel double perovskite Ba2NixCo2−xO6 as promising oxygen carrier materials for CO2 capture application
(
- Contribution to journal › Article
-
Mark
Numerical study of heat transfer in gravity-driven particle flow around tubes with different shapes
(
- Contribution to journal › Article
-
Mark
Optical Characterization of Methanol Sprays and Mixture Formation in a Compression-Ignition Heavy-Duty Engine
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of the Effect of Glow Plugs on Low Load Gasoline PPC
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Multi-Cylinder Adaptation of In-Cycle Predictive Combustion Models
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
In-Cycle Closed-Loop Combustion Control for Pilot Misfire Compensation
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optimization and Evaluation of a Low Temperature Waste Heat Recovery System for a Heavy Duty Engine over a Transient Cycle
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat transfer performance and friction factor of various nanofluids in a double-tube counter flow heat exchanger
(
- Contribution to journal › Article
-
Mark
Investigation on Thermal-Hydraulic Performance in a Printed Circuit Heat Exchanger with Airfoil and Vortex Generator Fins for Supercritical Liquefied Natural Gas
(
- Contribution to journal › Article
-
Mark
Numerical study of flow inhomogeneity and heat transfer enhancement in structured packed beds
(
- Contribution to journal › Article
-
Mark
Investigation on the thermal-hydraulic performance in a PCHE with airfoil fins for supercritical LNG near the pseudo-critical temperature under the rolling condition
(
- Contribution to journal › Article
-
Mark
Adaptive Model Predictive Control of Combustion in Flex-Fuel Heavy Duty Compression-Ignition Engine
(
- Contribution to journal › Article
-
Mark
Cylinder Pressure Based Method for In-Cycle Pilot Misre Detection
2020) SAE 14th International Conference on Engines and Vehicles, ICE 2019 In International Journal of Advances and Current Practices in Mobility 2(2). p.488-502(
- Contribution to journal › Article
-
Mark
Evaluation of engine efficiency, emissions and load range of a PPC concept engine, with higher octane and alkylate gasoline
(
- Contribution to journal › Article
-
Mark
An improved Flamelet method for spray combustion simulations in modern engine applications
2020) 12th International Conference on Applied Energy, (ICAE2020)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparative study on the adiabatic film cooling performances with elliptical or super-elliptical holes of various length-to-width ratios
(
- Contribution to journal › Article
-
Mark
Performance of fuel-air combustion in a reheating furnace at different flowrate and inlet conditions
(
- Contribution to journal › Article
-
Mark
Investigation of gas–liquid dispersion and mass transfer performance of wide-viscosity-range impellers in water solutions of xanthan gum
(
- Contribution to journal › Article
-
Mark
In-situ chemical polymerization of Cu-Polythiophenes composite film as seed layer for direct electroplating on insulating substrate
(
- Contribution to journal › Article
-
Mark
Design of Full-Scale Endwall Film Cooling of a Turbine Vane
(
- Contribution to journal › Article
-
Mark
Heat-dissipation performance of nanocomposite phase-change materials in a twin-heat-source system
(
- Contribution to journal › Article
-
Mark
Experimental investigation of heat transfer performance of a heat pipe combined with thermal energy storage materials of CuO-paraffin nanocomposites
(
- Contribution to journal › Article
-
Mark
The role of multiple injections on combustion in a light-duty PPC engine
(
- Contribution to journal › Article
-
Mark
On the heat transfer characteristics of a Lamilloy cooling structure with curvatures with different pin fins configurations
(
- Contribution to journal › Article
-
Mark
Hydrogen and Hydrogen-Rich Fuels : Production and Conversion to Electricity
(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Thermo-Hydraulic Performance Enhancement of Finned Elliptical Tube Heat Exchangers by Utilizing Innovative Dimple Turbulators
(
- Contribution to journal › Article
-
Mark
Development of new finned tube heat exchanger : Innovative tube-bank design and thermohydraulic performance
(
- Contribution to journal › Article
-
Mark
Numerical analysis of supercritical n-decane upward flow and heat transfer characteristics in the buffer layer of a vertical tube
(
- Contribution to journal › Article
-
Mark
The abnormal heat transfer behavior of supercritical n-decane flowing in a horizontal tube under regenerative cooling for scramjet engines
(
- Contribution to journal › Article
-
Mark
Electrospun fabrication of nanofibers as high-performance cathodes of solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Electrochemical Synthesis of Ammonia Based on a Perovskite LaCrO3 Catalyst
(
- Contribution to journal › Article
-
Mark
Numerical Investigation on Thermal Performance Design of Cryogenic Compact Heat Exchangers with Serrated-Fin Channels
(
- Contribution to journal › Article
-
Mark
Analysis of Fouling in Six-Start Spirally Corrugated Tubes
(
- Contribution to journal › Article
- 2019
-
Mark
An experimental/numerical investigation of the role of the quarl in enhancing the blowout limits of swirl-stabilized turbulent non-premixed flames
(
- Contribution to journal › Article
-
Mark
Thin reaction zones in highly turbulent medium
(
- Contribution to journal › Article
-
Mark
Simultaneous 36 kHz PLIF/chemiluminescence imaging of fuel, CH2O and combustion in a PPC engine
(
- Contribution to journal › Article
-
Mark
A parametric comparison of temperature uniformity and energy performance of a PEMFC having serpentine wavy channels
(
- Contribution to journal › Article
-
Mark
Control of decentralised solar district heating
(
- Contribution to journal › Article
-
Mark
Performance and emissions of a series hybrid vehicle powered by a gasoline partially premixed combustion engine
(
- Contribution to journal › Article
-
Mark
Correlations for prediction of the bubble departure radius on smooth flat surface during nucleate pool boiling
(
- Contribution to journal › Article
-
Mark
Flow patterns and slug scaling of liquid-liquid flow in square microchannels
(
- Contribution to journal › Article
-
Mark
Influences of secondary flow induced by Coriolis forces and angled ribs on heat transfer in a rotating channel
(
- Contribution to journal › Article
-
Mark
Large Eddy Simulation of Bluff-Body Flame Approaching Blow-Off : A Sensitivity Study
(
- Contribution to journal › Article
-
Mark
Investigation of mixed convection in an enclosure filled with nanofluids of Al2O3 –water and graphene-ethylene glycol
(
- Contribution to journal › Article
-
Mark
Effects of an MPL on water and thermal management in a PEMFC
(
- Contribution to journal › Article
-
Mark
Investigation on a high-stratified direct injection spark ignition (DISI) engine fueled with methanol under a high compression ratio
(
- Contribution to journal › Article
-
Mark
Evaluation and Transient Control of an Advanced Multi-Cylinder Engine Based on Partially Premixed Combustion
(
- Contribution to journal › Article
-
Mark
Structure and burning velocity of turbulent premixed methane/air jet flames in thin-reaction zone and distributed reaction zone regimes
(
- Contribution to journal › Article
-
Mark
NOx-Conversion Comparison of a SCR-Catalyst Using a Novel Biomimetic Effervescent Injector on a Heavy-Duty Engine
2019)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental investigation on convective heat transfer of ferrofluids inside a pipe under various magnet orientations
(
- Contribution to journal › Article
-
Mark
Study on low temperature heat release of partially premixed combustion in a heavy duty engine for real-time applications
(
- Contribution to journal › Article
-
Mark
Construction and assessment of reduced oxidation mechanisms using global sensitivity analysis and uncertainty analysis
(
- Contribution to journal › Article
-
Mark
A DNS Study of Sensitivity of Scaling Exponents for Premixed Turbulent Consumption Velocity to Transient Effects
(
- Contribution to journal › Article
-
Mark
Liquid-liquid two-phase flow patterns in ultra-shallow straight and serpentine microchannels
(
- Contribution to journal › Article
-
Mark
A review on molten-salt-based and ionic-liquid-based nanofluids for medium-to-high temperature heat transfer
(
- Contribution to journal › Article
-
Mark
Effects of ambient pressure on ignition and flame characteristics in diesel spray combustion
(
- Contribution to journal › Article
-
Mark
Effect of operational parameters on combustion and emissions in an industrial gas turbine combustor
(
- Contribution to journal › Article
-
Mark
Methanol as a fuel for internal combustion engines
(
- Contribution to journal › Scientific review
-
Mark
The role of a split injection strategy in the mixture formation and combustion of diesel spray: A large-eddy simulation
(
- Contribution to journal › Article
-
Mark
Numerical and experimental studies of irregular-shape biomass particle motions in turbulent flows
(
- Contribution to journal › Article
-
Mark
Suppression of endwall heat transfer in the junction region with a symmetric airfoil by a vortex generator pair
(
- Contribution to journal › Article
-
Mark
Influences of a multi-cavity tip on the blade tip and the over tip casing aerothermal performance in a high pressure turbine cascade
(
- Contribution to journal › Article
-
Mark
High efficient internal combustion engine using partially premixed combustion with multiple injections
(
- Contribution to journal › Article
-
Mark
Impact of carbon deposition on diffusion parameters in porous anodes of solid oxide fuel cells using the lattice Boltzmann method
2019) 16th International Symposium on Solid Oxide Fuel Cells, SOFC 2019 In ECS Transactions 91(1). p.2023-2030(
- Contribution to journal › Article
-
Mark
Empirical correlations for the performance of a PEFC considering relative humidity of fuel and oxidant gases
2019) In International Journal of Hydrogen Energy(
- Contribution to journal › Article
-
Mark
Large eddy simulation of turbulent flow and heat transfer in outward transverse and helically corrugated tubes
(
- Contribution to journal › Article
-
Mark
减压阀噪声研究进展
2019) In Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering 37(1). p.49-57(
- Contribution to journal › Article
-
Mark
Heat transfer analysis on dimple geometries and arrangements in dimple jacketed heat exchanger
(
- Contribution to journal › Article
-
Mark
Electrophoretic deposition surfaces to enhance HFE-7200 pool boiling heat transfer and critical heat flux
(
- Contribution to journal › Article
-
Mark
Air inlet angle influence on the air-side heat transfer and flow friction characteristics of a finned oval tube heat exchanger
(
- Contribution to journal › Article
-
Mark
Numerical Studies of Methanol PPC Engines and Diesel Sprays
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Diffusion parameter correlations for PEFC gas diffusion layers considering the presence of a water-droplet
2019) In International Journal of Hydrogen Energy(
- Contribution to journal › Article
-
Mark
Pool Boiling on Structured Surfaces: Heat Transfer and Critical Heat Flux : Experiments and Mechanistic Modelling
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
A parametric study on cavitation flow through steam trap valves under high pressure difference
2019) XII International Conference on Computational Heat, Mass and Momentum Transfer, ICCHMT 2019(
- Contribution to conference › Abstract
-
Mark
Effect of droplet superficial velocity on mixing efficiency in liquid-liquid droplet flow
2019) XII International Conference on Computational Heat, Mass and Momentum Transfer, ICCHMT 2019(
- Contribution to conference › Abstract
-
Mark
Impact of Octane Number and Injection Timing on Autoignition Behaviour of Gasoline and PRF in PPC
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of phase change materials on heat dissipation of a multiple heat source system
(
- Contribution to journal › Article
-
Mark
Computational simulation data using the Lattice Boltzmann method to generate correlations for gas diffusion layer parameters
(
- Contribution to journal › Article
-
Mark
Parametric study and optimization on heat transfer and flow characteristics in a rectangular channel with longitudinal vortex generators
(
- Contribution to journal › Article
-
Mark
A numerical study of mixing phenomena and reaction front propagation in partially premixed combustion engines
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Influence of Injection Strategies on Engine Efficiency for a Methanol PPC Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Literature Review on Dual-Fuel Combustion Modelling
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Large Eddy Simulation of an Ignition Front in a Heavy Duty Partially Premixed Combustion Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical Investigation of Methanol Ignition Sequence in an Optical PPC Engine with Multiple Injection Strategies
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Coupled Tabulated Kinetics and Flame Propagation Model for the Simulation of Fumigated Medium Speed Dual-Fuel Engines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of In-Cylinder Flow Structures on Soot Formation and Oxidation in a Swirl-Supported Light-Duty Diesel Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of a dynamic injection flow rate on slug generation in a cross-junction square microchannel
(
- Contribution to journal › Article
-
Mark
Learning Based Model Predictive Control of Combustion Timing in Multi-Cylinder Partially Premixed Combustion Engine
2019) In SAE Technical Papers(
- Contribution to journal › Article
-
Mark
Numerical Investigation and Estimating Correlation of Micromixing Performance of Coaxial Mixers
(
- Contribution to journal › Article
-
Mark
Combustion of NH3/CH4/Air and NH3/H2/Air Mixtures in a Porous Burner : Experiments and Kinetic Modeling
(
- Contribution to journal › Article
-
Mark
Hydrogen, Batteries and Fuel Cells
2019)(
- Book/Report › Book
-
Mark
On the nanoparticles effect on the nucleate boiling on a micro-pin-fin surface
2019)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of various hole configurations on wall coling performance
2019) 14th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES 2019 SDEWES2019-0043.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat transfer characteristics and friction factor of various nanofluids in a double-pipe heat exchanger
2019) 14th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES 2019 SDEWES2019-0237.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical study of flow field and residence time distribution in structured packed beds
2019) 14th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES 2019 SDEWES2019-0190.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance experimental data of a polymer electrolyte fuel cell considering the variation of the relative humidity of reactants gases
(
- Contribution to journal › Article
-
Mark
Low-temperature District Heating : Various Aspects of Fourth-generation Systems
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Experimental and numerical study of natural convection in bottom-heated cylindrical cavity filled with molten salt nanofluids
2019) In Journal of Thermal Analysis and Calorimetry(
- Contribution to journal › Article
-
Mark
Analysis of laminar flow and heat transfer in an interrupted microchannel heat sink with different shaped ribs
2019) In Journal of Thermal Analysis and Calorimetry(
- Contribution to journal › Article
-
Mark
Effect of hole configurations on film cooling performance
(
- Contribution to journal › Article
-
Mark
Numerical Optimization of Compression Ratio for a PPC Engine running on Methanol
2019) 2019 JSAE/SAE Powertrains, Fuels and Lubricants International Meeting, JSAE 2019 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Preface
2019) 2nd International Conference on Future Learning Aspects for Mechanical Engineering, FLAME 2020 In Lecture Notes in Mechanical Engineering(
- Chapter in Book/Report/Conference proceeding › Foreword/Postscript
-
Mark
Polymer electrolyte fuel cell system level modelling and simulation of transient behavior
(
- Contribution to journal › Article
-
Mark
Numerical simulation of ignition mode and ignition delay time of pulverized biomass particles
(
- Contribution to journal › Article
-
Mark
Double Compression-Expansion Engine Concepts : Experimental and simulation study of a split-cycle concept for improved brake efficiency
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
On the Combustion Characteristics of Closely-Coupled LD Diesel Injection Strategies
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Numerical modelling of the ice throw from wind turbines
(
- Contribution to journal › Article
-
Mark
The Behavior of Turbulent Heat Transfer Deterioration in Supercritical Hydrocarbon Fuel Flow Considering Thermal Resistance Distribution
(
- Contribution to journal › Article
-
Mark
Combustion characteristics of gasoline DICI engine in the transition from HCCI to PPC : Experiment and numerical analysis
(
- Contribution to journal › Article
-
Mark
Thermal performance enhancement in a wedge duct with in-line pin fins combined with vortex generators
(
- Contribution to journal › Article
-
Mark
Decision-making process for addressing bottleneck problems in district heating networks
(
- Contribution to journal › Article
-
Mark
A numerical framework for heat transfer and pressure loss estimation of matrix cooling geometry in stationary and rotational states
(
- Contribution to journal › Article
-
Mark
Heat transfer characteristics of a dimpled/protrusioned pin fin wedge duct with different converging angles for turbine blades
(
- Contribution to journal › Article
-
Mark
Experimental Investigation on Drawdown of Floating Particles in Viscous Systems Driven by Coaxial Mixers
(
- Contribution to journal › Article
-
Mark
Effect of the relative location of a pocket cavity on heat transfer and flow structures of the downstream endwall with a symmetrical vane
(
- Contribution to journal › Article
-
Mark
Investigation of environmental, operational and economic performance of methanol partially premixed combustion at slow speed operation of a marine engine
(
- Contribution to journal › Article
-
Mark
Heat transfer prediction and critical heat flux mechanism for pool boiling of NOVEC-649 on microporous copper surfaces
(
- Contribution to journal › Article
-
Mark
Investigation on bluff-body and swirl stabilized flames near lean blowoff with PIV/PLIF measurements and LES modelling
(
- Contribution to journal › Article
-
Mark
Investigation of effects of intake temperature on low load limitations of methanol partially premixed combustion
(
- Contribution to journal › Article
-
Mark
Experimental and kinetic modelling investigation on NO, CO and NH3 emissions from NH3/CH4/air premixed flames
(
- Contribution to journal › Article
-
Mark
Filtered Reaction Rate Modelling in Moderate and High Karlovitz Number Flames : an a Priori Analysis
(
- Contribution to journal › Article
-
Mark
Report on improved use of individual metering concept
2019)(
- Book/Report › Report
-
Mark
Computational analysis of span-wise hole locations on fluid flow and film cooling of internal channels with crescent ribs
(
- Contribution to journal › Article
-
Mark
Analysis of heat transfer and fluid flow of a slot jet impinging on a confined concave surface with various curvature and small jet to target spacing
(
- Contribution to journal › Article
-
Mark
Design guidelines for fluid-elastic instability of tube bundles subjected to two-phase cross flow
(
- Contribution to journal › Article
-
Mark
Progress in the use of electrospun nanofiber electrodes for solid oxide fuel cells : A review
(
- Contribution to journal › Article
-
Mark
Dynamic Contact Angle Modeling of Droplet Reattachment at the Gas Channel Wall in Polymer Electrolyte Fuel Cells
(
- Contribution to journal › Article
-
Mark
Experimental investigation on solid suspension performance of coaxial mixer in viscous and high solid loading systems
(
- Contribution to journal › Article
-
Mark
Research on thermal properties of novel silica nanoparticle/binary nitrate/expanded graphite composite heat storage blocks
(
- Contribution to journal › Article
-
Mark
Large eddy simulation of turbulent heat transfer in a non-isothermal channel : Effects of temperature-dependent viscosity and thermal conductivity
(
- Contribution to journal › Article
-
Mark
Surface-averaged quantities in turbulent reacting flows and relevant evolution equations
(
- Contribution to journal › Article
-
Mark
旋流器出口结构对旋流火焰的影响研究
(
- Contribution to journal › Article
-
Mark
The influences of sidewall proximity on flow and thermal performance of a microchannel with large-row pin-fins
(
- Contribution to journal › Article
-
Mark
Experimental study of fluid flow and heat transfer of jet impingement in cross-flow with a vortex generator pair
(
- Contribution to journal › Article
-
Mark
Large Eddy Simulation and Experimental Analysis of Combustion Dynamics in a Gas Turbine Burner
(
- Contribution to journal › Article
-
Mark
Analysis of heat and mass transport characteristics in anode-supported solid oxide fuel cells at various operating conditions
(
- Contribution to journal › Article
-
Mark
Cavitating flow through a micro-orifice
(
- Contribution to journal › Article
-
Mark
District Heating Development : Prosumers and Bottlenecks
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Energy saving in thermal energy systems using dimpled surface technology – A review on mechanisms and applications
(
- Contribution to journal › Scientific review
-
Mark
Energy analysis and multi-objective optimization of waste heat and cold energy recovery process in LNG-fueled vessels based on a triple organic Rankine cycle
(
- Contribution to journal › Article
-
Mark
Thin reaction zones in constant-density turbulent flows at low Damköhler numbers : Theory and simulations
(
- Contribution to journal › Article
-
Mark
Analysis of a hybrid control scheme in the district heating system with distributed variable speed pumps
(
- Contribution to journal › Article
-
Mark
Nonlinear Estimation of Variables for Heat Release Calculation Using a Gradient Method
(
- Contribution to journal › Article
-
Mark
A numerical prediction on heat transfer characteristics from a circular tube in supercritical fluid crossflow
(
- Contribution to journal › Article
-
Mark
Numerical investigation on flow and thermal performance of supercritical CO
2
in horizontal cylindrically concaved tubes
(
- Contribution to journal › Article
-
Mark
Heat transfer enhancement and turbulent flow in a rectangular channel using perforated ribs with inclined holes
(
- Contribution to journal › Article
-
Mark
Prediction and Comparison of Shell Condensers with Straight or Helical Channels for Underwater Vehicles
(
- Contribution to journal › Article
-
Mark
Heat transfer and flow structure in a detached latticework duct
(
- Contribution to journal › Article
-
Mark
Heat transfer and flow structure in a rotating duct with detached pin fins
(
- Contribution to journal › Article
-
Mark
DNS study of the bending effect due to smoothing mechanism
(
- Contribution to journal › Article
-
Mark
Modeling and Control Strategies of Proton Exchange Membrane Fuel Cells
2019) 2018 Renewable Energy Integration with Mini/Microgrid, REM 2018 In Energy Procedia 159. p.54-59(
- Contribution to journal › Article
-
Mark
Predicting dynamic fuel oil consumption on ships with automated machine learning
2019) 10th International Conference on Applied Energy, ICAE 2018 In Energy Procedia 158. p.6126-6131(
- Contribution to journal › Article
-
Mark
Impact of water drop presence on diffusion parameters of PEFC gas diffusion layers
2019) 10th International Conference on Applied Energy, ICAE 2018 In Energy Procedia 158. p.1400-1405(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The contact angle of nanofluids as thermophysical property
(
- Contribution to journal › Article
-
Mark
Effect of gas distributor on gas–liquid dispersion and mass transfer characteristics in stirred tank
(
- Contribution to journal › Article
-
Mark
Investigations of Heat Transfer and Fluid Flow in the Pocket Region of a Gas Turbine Engine and Cooling of a Turbine Blade
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
An analysis of pool boiling heat transfer on nanoparticle-coated surfaces
(
- Contribution to journal › Article
-
Mark
Nucleate pool boiling heat transfer of acetone and HFE7200 on copper surfaces with nanoparticle coatings
2019) 10th International Conference on Applied Energy (ICAE2018) In Energy Procedia 158. p.5872-5879(
- Contribution to journal › Article
-
Mark
Effects of in-cylinder flow simplifications on turbulent mixing at varying injection timings in a piston bowl ppc engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulation based investigation of achieving low temperature combustion with methanol in a direct injected compression ignition engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The relevance of different fuel indices to describe autoignition behaviour of gasoline in light duty dici engine under ppc mode
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Measurement of gasoline exhaust particulate matter emissions with a wide-range EGR in a heavy-duty diesel engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of injection timing on the ignition and mode of combustion in a HD ppc engine running low load
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison of kinetic mechanisms for numerical simulation of methanol combustion in dici heavy-duty engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cylinder to cylinder variation related to gas injection timing on a dual-fuel engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Direct numerical simulation of turbulent premixed flames at high Karlovitz numbers: structure and modelling
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Statistics conditioned to isoscalar surfaces in highly turbulent premixed reacting systems
(
- Contribution to journal › Article
-
Mark
System Simulation of Partially Premixed Combustion in Heavy-Duty Engines : Gas Exchange, Fuels and In-cylinder Analysis
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Evaluation of variable compression ratio (VCR)and variable valve timing (VVT)strategies in a heavy-duty diesel engine with reactivity controlled compression ignition (RCCI)combustion under a wide load range
(
- Contribution to journal › Article
-
Mark
Emission characteristics and engine performance of gasoline DICI engine in the transition from HCCI to PPC
(
- Contribution to journal › Article
-
Mark
Evolution of averaged local premixed flame thickness in a turbulent flow
(
- Contribution to journal › Article
-
Mark
Feasibility study on a novel heat exchanger network for cryogenic liquid regasification with cooling capacity recovery : Theoretical and experimental assessments
(
- Contribution to journal › Article
-
Mark
Turbulent heat transfer characteristics of supercritical n-decane in a vertical tube under various operating pressures
(
- Contribution to journal › Article
-
Mark
Characterization of the Combustion of Light Alcohols in CI Engines : Performance, Combustion Characteristics and Emissions
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Thermal Reduction of NOx in a Double Compression Expansion Engine by Injection of AAS 25 and AUS 32 in the Exhaust Gases
2019) SAE 2019 International Powertrains, Fuels and Lubricants Meeting, FFL 2019 In SAE Technical Papers 2019.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optical Investigation on the Combustion Process Differences between Double-Pilot and Closely-Coupled Triple-Pilot Injection Strategies in a LD Diesel Engine
2019) SAE 2019 International Powertrains, Fuels and Lubricants Meeting, FFL 2019 In SAE Technical Papers 2019-January.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulation of System Brake Efficiency in a Double Compression-Expansion Engine-Concept (DCEE) Based on Experimental Combustion Data
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigating the Potential of an Integrated Coolant Waste Heat Recovery System in an HD Engine Using PPC Operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A priori analysis of sub-grid variance of a reactive scalar using DNS data of high Ka flames
(
- Contribution to journal › Article
-
Mark
Effect of droplet characteristics on heat transfer of mist/air cooling in a pin-finned channel
(
- Contribution to journal › Article
-
Mark
Investigation of PPC in an Optical Engine : With focus on Fuel Distribution and Combustion Characterization
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Saturated pool boiling heat transfer of acetone and HFE-7200 on modified surfaces by electrophoretic and electrochemical deposition
(
- Contribution to journal › Article
-
Mark
Three-dimensional flow structures and droplet-gas mixing process of a liquid jet in supersonic crossflow
(
- Contribution to journal › Article
-
Mark
Special issue on benchmark problems in automotive system control
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Experimental and Numerical Investigations of Heat Transfer related to Gas Turbine Applications
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Faults in district heating customer installations and ways to approach them: Experiences from Swedish utilities
(
- Contribution to journal › Article
-
Mark
Effect of A-/B-site doping on oxygen non-stoichiometry, structure characteristics, and O2 releasing behavior of La1−xCaxCo1−yFeyO3−δ perovskites
(
- Contribution to journal › Article
-
Mark
Research laboratory for Smart Control Valves at Zhejiang University
2019) In Journal of Zhejiang University: Science A(
- Contribution to journal › Article
-
Mark
Convergence angle and dimple shape effects on the heat transfer characteristics in a rotating dimple-pin fin wedge duct
(
- Contribution to journal › Article
-
Mark
Biomass steam gasification in bubbling fluidized bed for higher-H
2
syngas : CFD simulation with coarse grain model
(
- Contribution to journal › Article
-
Mark
The energy performance of a single-screw compressor for natural gas liquefaction process : Effects of the lubricating oil flow rate
(
- Contribution to journal › Article
-
Mark
Bio-Inspired Urea Dosing and NOx Conversion : using a Biomimetic Effervescent Injector
2019)(
- Thesis › Doctoral thesis (compilation)
-
Mark
A comparative study between D2Q9 and D2Q5 lattice Boltzmann scheme for mass transport phenomena in porous media
(
- Contribution to journal › Article
-
Mark
Chemical kinetic modelling of ammonia/hydrogen/air ignition, premixed flame propagation and NO emission
(
- Contribution to journal › Article
-
Mark
Effect of EGR routing on efficiency and emissions of a PPC engine
(
- Contribution to journal › Article
-
Mark
Modeling of droplet detachment using dynamic contact angles in polymer electrolyte fuel cell gas channels
(
- Contribution to journal › Article
-
Mark
Impact of closely-coupled triple-pilot and conventional double-pilot injection strategies in a LD diesel engine
(
- Contribution to journal › Article
-
Mark
Interaction between Fuel Jets and Prevailing Combustion During Closely-Coupled Injections in an Optical LD Diesel Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Manipulating Heat Release Features to Minimize Combustion Noise
(
- Contribution to journal › Article
-
Mark
Numerical studies of flame extinction and re-ignition behaviors in a novel, ultra-lean, non-premixed model GT burner using LES-ESF method
2019) In Fuel(
- Contribution to journal › Article
-
Mark
A comprehensive review on liquid–liquid two-phase flow in microchannel : flow pattern and mass transfer
(
- Contribution to journal › Scientific review
-
Mark
Heat transfer and flow structure in a latticework duct with different sidewalls
(
- Contribution to journal › Article
-
Mark
Effect of the broken rib locations on the heat transfer and fluid flow in a rotating latticework duct
(
- Contribution to journal › Article
-
Mark
Regulated Emissions and Detailed Particle Characterisation for Diesel and RME Biodiesel Fuel Combustion with Varying EGR in a Heavy-Duty Engine
2019) JSAE/SAE 2019 International Powertrains, Fuels and Lubricants Meeting In SAE Technical Paper Series 2019(December).(
- Contribution to journal › Article
- 2018
-
Mark
A review of the use of organic Rankine cycle power systems for maritime applications
(
- Contribution to journal › Scientific review
-
Mark
Turbulent compressible flow analysis on multi-stage high pressure reducing valve
(
- Contribution to journal › Article
-
Mark
Mass transfer between phases in microchannels : A review
(
- Contribution to journal › Scientific review
-
Mark
Rheological and thermal transport characteristics of a transformer oil based ferrofluid
(
- Contribution to journal › Article
-
Mark
Correct interpretation of nanofluid convective heat transfer
(
- Contribution to journal › Scientific review
-
Mark
Computational fluid dynamics analysis on orifice structure inside valve core of pilot-control angle globe valve
2018) In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232(13). p.2419-2429(
- Contribution to journal › Article
-
Mark
A Numerical Study on the Sensitivity of Soot and NOx Formation to the Operating Conditions in Heavy Duty Engines
(
- Contribution to journal › Article
-
Mark
Ultra-High Speed Fuel Tracer PLIF Imaging in a Heavy-Duty Optical PPC Engine
(
- Contribution to journal › Article
-
Mark
Mechanisms of Post-Injection Soot-Reduction Revealed by Visible and Diffused Back-Illumination Soot Extinction Imaging
(
- Contribution to journal › Article
-
Mark
Lift-Off Lengths in an Optical Heavy-Duty Engine Operated at High Load with Low and High Octane Number Fuels
(
- Contribution to journal › Article
-
Mark
Investigation of Particle Number Emission Characteristics in a Heavy-Duty Compression Ignition Engine Fueled with Hydrotreated Vegetable Oil (HVO)
(
- Contribution to journal › Article
-
Mark
Computational investigation of the dust hole effect on the heat transfer and friction factor characteristics in a U bend channel
(
- Contribution to journal › Article
-
Mark
Performance and emissions of diesel-biodiesel-ethanol blends in a light duty compression ignition engine
(
- Contribution to journal › Article
-
Mark
Investigation of OH and CH2O distributions at ultra-high repetition rates by planar laser induced fluorescence imaging in highly turbulent jet flames
(
- Contribution to journal › Article
-
Mark
A generalized flamelet tabulation method for partially premixed combustion
(
- Contribution to journal › Article
-
Mark
Closed-loop combustion phase control for multiple combustion modes by multiple injections in a compression ignition engine fueled by gasoline-diesel mixture
(
- Contribution to journal › Article
-
Mark
On Reduction of Nitrogen Oxides in Heavy-Duty Engines : with NOx Model Feedback, PPC and SNCR
2018)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Experimental and modeling study of liquid fuel injection and combustion in diesel engines with a common rail injection system
(
- Contribution to journal › Article
-
Mark
Numerical study on thermal performance of non-uniform flow channel designs for cooling plates of PEM fuel cells
(
- Contribution to journal › Article
-
Mark
Stratification and Combustion in the Transition from HCCI to PPC
2018)(
- Thesis › Doctoral thesis (compilation)
-
Mark
The hydraulic cavitation affected by nanoparticles in nanofluids
(
- Contribution to journal › Article
-
Mark
Flow structure and heat transfer characteristics of a 90°-turned pin-finned wedge duct with dimples at different locations
(
- Contribution to journal › Article
-
Mark
Effects of the swirling coolant jet from the upstream slot on the vane endwall cooling and the vane suction side phantom cooling
(
- Contribution to journal › Article
-
Mark
Mechanism of chromium poisoning the conventional cathode material for solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Effects of the cooling configurations layout near the first-stage vane leading edge on the endwall cooling and phantom cooling of the vane suction side surface
(
- Contribution to journal › Article
-
Mark
Thermal performance of angled, V-shaped and leaning-V-shaped ribs in a rotating rectangular channel with 45° orientation
(
- Contribution to journal › Article
-
Mark
Effects of agglomerate model parameters on transport characterization and performance of PEM fuel cells
(
- Contribution to journal › Article
-
Mark
Modelling of diesel spray flames under engine-like conditions using an accelerated Eulerian Stochastic Field method
(
- Contribution to journal › Article
-
Mark
Double Compression Expansion Engine Concepts : Efficiency Analysis over a Load Range
(
- Contribution to journal › Article