Department of Mechanical Engineering Sciences
1 – 250 of 1794
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2025
-
Mark
Unveiling nano-scale chemical inhomogeneity in surface oxide films formed on V- and N-containing martensite stainless steel by synchrotron X-ray photoelectron emission spectroscopy/microscopy and microscopic X-ray absorption spectroscopy
(
- Contribution to journal › Article
-
Mark
Securing Industry 4.0: Assessing Cybersecurity Challenges and Proposing Strategies for Manufacturing Management
(
- Contribution to journal › Article
- 2024
-
Mark
Rooting out the root causes of order fulfilment errors : a multiple case study
(
- Contribution to journal › Article
-
Mark
A thermal evaporator for aerosol core-shell nanoparticle synthesis
(
- Contribution to journal › Article
-
Mark
A Polycrystalline Pd Surface Studied by Two-Dimensional Surface Optical Reflectance during CO Oxidation : Bridging the Materials Gap
(
- Contribution to journal › Article
-
Mark
Strain and phase evolution in TiAlN coatings during high-speed metal cutting : An in operando high-energy x-ray diffraction study
(
- Contribution to journal › Article
-
Mark
Angular-dependent interatomic potential for large-scale atomistic simulation of W-Mo-Nb ternary alloys
(
- Contribution to journal › Article
-
Mark
Cybersecurity 4.0: safeguarding trust and production in the digital food industry era
(
- Contribution to journal › Article
-
Mark
Mechanical integrity of PVD TiAlN-coated PcBN : Influence of substrate bias voltage and microstructural assemblage
(
- Contribution to journal › Article
-
Mark
The Role of Microfibers and Liquid Aluminum in the Reaction between Boron Nitride and Tantalum Nitride
(
- Contribution to journal › Article
-
Mark
Wear mechanisms in Ti(C,N)-Al2O3 coated carbide during sustainable machining CGI
(
- Contribution to journal › Article
-
Mark
Grain-level mechanism of plastic deformation in harmonic structure materials revealed by high resolution X-ray diffraction
(
- Contribution to journal › Article
-
Mark
Rapid acquisition of digital fingerprints of Ti-6Al-4V macrotexture from machining force measurement data
(
- Contribution to journal › Article
-
Mark
Spatially resolved structural and chemical properties of the white layer in machined Inconel 718 super alloy
(
- Contribution to journal › Article
-
Mark
The customer order decoupling point in empirical operations and supply chain management research : a systematic literature review and framework
2024) In International Journal of Production Research(
- Contribution to journal › Scientific review
-
Mark
Different Analytical Methods to Determine the Influence of Pitting on the Residual Performance of Mg Alloys as Implant Materials
2024) Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, 2024 In Minerals, Metals and Materials Series p.3-5(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the optimisation of phase fractions in harmonic structure materials
2024) In Journal of Materials Science(
- Contribution to journal › Article
-
Mark
Corrosion Rates by Immersion and Calorimetry on the Example of Extruded Mg10Gd(1Nd)1La
2024) Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, 2024 In Minerals, Metals and Materials Series p.35-39(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Supply chain visibility : A Delphi study on managerial perspectives and priorities
(
- Contribution to journal › Article
-
Mark
Key Performance Index for Creating an Integrated and Sustainable Academy - A University with the Ability to Meet Future Needs and Challenges Identified in Society and Industry
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.643-659(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Concept from Sensor to Sustainability in Machining - An Interdisciplinary Approach over a Wide TRL Range
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.148-170(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Strategies for Effective Chip Management in Machining of Ductile Cast Iron
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.50-61(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Green Inventory Management
(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Effect of ageing on machining performance of grey cast iron and its compensation by cutting speed management
2024) In CIRP Annals(
- Contribution to journal › Article
-
Mark
Diffusion Bonding 321-Grade Stainless Steel : Failure and Multimodal Characterization
2024) In Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada 30(2). p.192-199(
- Contribution to journal › Article
-
Mark
Machining SiC fibre reinforced metal matrix composites – How do different matrix materials affect the cutting performance?
2024) In CIRP Annals(
- Contribution to journal › Article
-
Mark
Greening the future: identifying and mitigating environmental hotspots in the MSME sector - a wall mixer case study
(
- Contribution to journal › Article
-
Mark
First-principles study on thermal expansion of W-Re sigma and chi phases
(
- Contribution to journal › Article
-
Mark
Who changes what, when and where? Elaborating postponement when integrating hardware and software objects in global supply chains
2024) In International Journal of Physical Distribution and Logistics Management(
- Contribution to journal › Article
-
Mark
A Methodology Using Monte-Carlo Simulation on Nanoindentation Deconvolution for Metal Classification
2024) 11th Swedish Production Symposium In Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning 52. p.613-627(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Relationship Between Tool Temperature Distribution and Stagnation Point Behavior for Different Process Factors in Machining Operations
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.69-89(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
In situ imaging of precipitate formation in additively manufactured al-alloys by scanning X-ray fluorescence
(
- Contribution to journal › Article
-
Mark
Enhanced steel machining performance using texture-controlled CVD alpha-alumina coatings : Fundamental degradation mechanisms
(
- Contribution to journal › Article
-
Mark
Implementing Lean 4.0: A Review of Case Studies in Pharmaceutical Industry Transformation
2024) In Technological Sustainability(
- Contribution to journal › Article
-
Mark
Empowering Sustainable Manufacturing : Unleashing Digital Innovation in Spool Fabrication Industries
(
- Contribution to journal › Article
-
Mark
Wear Mechanisms in Cutting Tools for Machining Applications : Interfacial Phenomena, Characterization, and Relation to Performance
2024)(
- Thesis › Doctoral thesis (compilation)
-
Mark
On wear of TiAlN coated tools with and without NbN overlayer in machining titanium alloys
(
- Contribution to journal › Article
-
Mark
Revisiting the definition of humanitarian logistics
(
- Contribution to journal › Article
-
Mark
Advancing the digital frontier in agri-food supply chains
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Surviving the Storm: Navigating the Quadruple Whammy Impact on Europe's Food Supply Chain
2024) In International Journal of Food Science & Technology(
- Contribution to journal › Article
-
Mark
Unravelling the economic impact of climate change in Vietnam's Mekong River Delta and Southeast region
(
- Contribution to journal › Article
-
Mark
Mapping the path to a decarbonised agri-food products : A hybrid geographic information system and life cycle inventory methodology for assessing sustainable agriculture
2024) In International Journal of Food Science & Technology(
- Contribution to journal › Article
-
Mark
The Emergence of Digitalization to the Manufacturing Sector in the Sustainability Context : A Multi-stakeholder Perspective Analysis
(
- Contribution to journal › Article
-
Mark
A level set approach to modelling diffusional phase transformations under finite strains with application to the formation of Cu6Sn5
(
- Contribution to journal › Article
-
Mark
Tribology and airborne particle emissions from grey cast iron and WC reinforced laser cladded brake discs
(
- Contribution to journal › Article
-
Mark
Grain boundary embrittlement due to phosphorus in tungsten : An atomistic approach
2024)(
- Thesis › Doctoral thesis (compilation)
-
Mark
On the wear mechanisms of uncoated and coated carbide tools in milling titanium alloys
(
- Contribution to journal › Article
-
Mark
Unlocking AI's Potential in the Food Supply Chain: A Novel Approach to Overcoming Barriers
(
- Contribution to journal › Article
-
Mark
The effect of workpiece grain size on surface integrity in orthogonal cutting of Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evolution of surface quality in micromilling Ti-6Al-4V alloy with increasing machined length
(
- Chapter in Book/Report/Conference proceeding › Preface to conference proceeding
-
Mark
On the surface integrity of machined aero-engine grade Ni-based superalloy billets produced by the field-assisted sintering technology (FAST) route
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Futuristic Technology for Sustainable Manufacturing
(2024)
- Book/Report › Book
-
Mark
Initial oxidation of low index Mg surfaces investigated by SCLS and DFT
(
- Contribution to journal › Article
-
Mark
Driving sustainability: assessing KPI effectiveness in the Saudi chemical industry
(
- Contribution to journal › Article
-
Mark
Phosphorus driven embrittlement and atomistic crack behavior in tungsten grain boundaries
(
- Contribution to journal › Article
-
Mark
Unlocking digital growth: overcoming barriers to digital transformation for Indian food SMEs
(
- Contribution to journal › Article
-
Mark
Machinability improvement by in-operando Tool Protection Layers through designed steel alloying : The case of manganese steel
(
- Contribution to journal › Article
-
Mark
Pharma 4.0: A deep dive top management commitment to successful Lean 4.0 implementation in Ghanaian pharma manufacturing sector
(
- Contribution to journal › Article
-
Mark
Why IoT Enablement of Agrifood Transportation Disappoints Its Stakeholders: Unravelling Barriers for Enhanced Logistics
(
- Contribution to journal › Article
-
Mark
Navigating barriers to reverse logistics adoption in circular economy: An integrated approach for sustainable development
(
- Contribution to journal › Article
-
Mark
Geometry of plastic deformation in metals as piecewise isometric transformations
(
- Contribution to journal › Article
-
Mark
Harmony of Self-Similarity : Overcoming the Strength–Ductility Trade-Off Through Harmonic Structure
2024) In Advanced Engineering Materials(
- Contribution to journal › Article
-
Mark
Evaluation of δ-Phase ZrH1.4 to ZrH1.7 Thermal Neutron Scattering Laws Using Ab Initio Molecular Dynamics Simulations
(
- Contribution to journal › Article
-
Mark
Contextualizing supply chain risk governance in critical infrastructure sectors : insights from the Swedish food system
(
- Contribution to journal › Article
-
Mark
Cross-border and Multi-modal Cold Chain Risk Assessment: Applying FMECA on a new Thai-Laos route
2024) MSIE 2024: 2024 6th International Conference on Management Science and Industrial Engineering p.31-38(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Information sharing in extended supply chains : why does it have to be so difficult?
2024) In Production Planning and Control(
- Contribution to journal › Article
-
Mark
Machining of Compacted Graphite Iron : A review
(
- Contribution to journal › Scientific review
-
Mark
Effect of cooling scheme and coating of drills on hole quality in drilling of Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Pin-on-disc tribological characterization of single ingredients used in a brake pad friction material
(
- Contribution to journal › Article
-
Mark
Integrating digital technologies in agriculture for climate change adaptation and mitigation : State of the art and future perspectives
(
- Contribution to journal › Scientific review
-
Mark
The role of the customer order decoupling point in operations and supply chain management
2024)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Surface sliding revealed by operando monitoring of high-pressure torsion by acoustic emission
(
- Contribution to journal › Article
- 2023
-
Mark
Process modularity, supply chain responsiveness, and moderators : The Médecins Sans Frontières response to the Covid-19 pandemic
(
- Contribution to journal › Article
-
Mark
Characterization of ultrafine particles from hardfacing coated brake rotors
(
- Contribution to journal › Article
-
Mark
Stress partitioning in harmonic structure materials at the early stages of tensile loading studied in situ by synchrotron X-ray diffraction
(
- Contribution to journal › Article
-
Mark
Evaluation and control of inventory distribution systems with quantity based shipment consolidation
(
- Contribution to journal › Article
-
Mark
Atomistic investigation of the impact of phosphorus impurities on the tungsten grain boundary decohesion
(
- Contribution to journal › Article
-
Mark
Ab-initio investigation of mechanical and fracture-related properties of W-Re σ and χ precipitates
(
- Contribution to journal › Article
-
Mark
Supply chain visibility for improving inbound logistics : a design science approach
(
- Contribution to journal › Article
-
Mark
Ab initio thermo-elasticity of 𝛿-MH𝑥 (M=Zr, Ti)
(
- Contribution to journal › Article
-
Mark
A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants
(
- Contribution to journal › Article
-
Mark
Modelling and Simulation of Gearset Behavior : Effects of Manufacturing Errors and Electrification
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Predicting wear mechanisms of ultra-hard tooling in machining Ti6Al4V by diffusion couples and simulation
(
- Contribution to journal › Article
-
Mark
Exact analysis of One-Warehouse-Multiple-Retailer inventory systems with quantity restricted deliveries
(
- Contribution to journal › Article
-
Mark
Automated detection of tool wear in machining and characterization of its shape
(
- Contribution to journal › Article
-
Mark
A molecular dynamics study on the influence of vacancies and interstitial helium on mechanical properties of tungsten
(
- Contribution to journal › Article
-
Mark
Degradation of multi-layer CVD-coated cemented carbide in finish milling compacted graphite iron
(
- Contribution to journal › Article
-
Mark
Supply chain risk management strategies in normal and abnormal times: policymakers' role in reducing generic medicine shortages
(
- Contribution to journal › Article
-
Mark
Controlling inventories in omni/multi-channel distribution systems with variable customer order-sizes
(
- Contribution to journal › Article
-
Mark
Evolution of residual stress when turning a fillet radius in stainless steel
(
- Contribution to journal › Article
-
Mark
Interstitial hydrogen diffusion in M7C3 (M = Cr, Mn, Fe),
(
- Contribution to journal › Article
-
Mark
An experimental and theoretical investigation on Ti-5553/WC–Co(6%) chemical interactions during machining and in diffusion couples
(
- Contribution to journal › Article
-
Mark
Visualising microstructural dynamics of titanium aluminium nitride coatings under variable-temperature oxidation
(
- Contribution to journal › Article
-
Mark
The importance of resource interaction in strategies for managing supply chain disruptions
(
- Contribution to journal › Article
-
Mark
Longitudinell mätning av förändringsarbete – från initiering via institutionalisering till effektmål. Utveckling och implementering av mätsystem och ramverk för att mäta förändringsinitiativ.
2023)(
- Book/Report › Report
-
Mark
Molecular dynamics simulations of nanometric cutting of single crystal copper sheets using a diamond tool
2023) Tenth International Conference on Materials Structure & Micromecanics of fracture, MSMF10 In Procedia Structural Integrity 43. p.9-14(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Revisiting postponement : The importance of cross- functional integration to understand tax implications in global supply chains
(
- Contribution to journal › Article
-
Mark
Global Supply Chain Management
2023) p.1-36(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Ett strategiskt avstamp : Nyckelbeslut för att investera i och utveckla ett högautomatiserat lager
2023) In Forskningsrapport(
- Book/Report › Report
-
Mark
Adhesive wear of TiAlN coatings during low speed turning of stainless steel 316L
(
- Contribution to journal › Article
-
Mark
Machining performance and wear behaviour of polycrystalline diamond and coated carbide tools during milling of titanium alloy Ti-54M
(
- Contribution to journal › Article
-
Mark
Insights in α-Al2O3 degradation in multilayer CVD coated carbide tools when turning IN718
(
- Contribution to journal › Article
-
Mark
Particle physics at the European Spallation Source
(
- Contribution to journal › Article
-
Mark
Research solution for automatic hole quality analysis when drilling fiber-reinforced composites
(
- Contribution to journal › Article
-
Mark
Digital twins for cutting processes
(
- Contribution to journal › Article
-
Mark
Connecting organizational context to environmental sustainability initiatives and industrial symbiosis : Empirical results and case analysis
(
- Contribution to journal › Article
-
Mark
On chemical interactions between an inclusion engineered stainless steel (316L) and (Ti,Al)N coated tools during turning
(
- Contribution to journal › Article
-
Mark
Development of a functional hardness gradient in WC-TiC-Co cemented carbide during gradient sintering
(
- Contribution to journal › Article
-
Mark
Large-scale metal strip for power storage and energy conversion applications by machining-based deformation processing
(
- Contribution to journal › Article
-
Mark
Grain Size-Dependent Thermal Expansion of Nanocrystalline Metals
(
- Contribution to journal › Article
-
Mark
Temperature-driven transition into vortex clusters in low-kappa intertype superconductors
(
- Contribution to journal › Article
-
Mark
A novel approach for brake emission estimation based on traffic microsimulation, vehicle system dynamics, and machine learning modeling
(
- Contribution to journal › Article
-
Mark
Creep of un-doped and Cr-doped WC-Co at high temperature and high load
(
- Contribution to journal › Article
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791407(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791391(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17789417(
- Patent › Patent
-
Mark
Ultrafine particle emissions from dry clutches : number concentration, size distribution and chemical composition
2023) In Environmental Science: Atmospheres(
- Contribution to journal › Article
-
Mark
The analysis of critical success factors for successful kaizen implementation during the COVID-19 pandemic : a textile industry case study
2023) In TQM Journal(
- Contribution to journal › Article
-
Mark
Revolutionizing Food Production: Digitalization for a Greener Future
(
- Contribution to conference › Abstract
-
Mark
Perspectives on supervising and conducting interdisciplinary research projects
2023) Proceedings of LTH:s 12:e Pedagogiska Inspirationskonferens In Proceedings LTH:s Pedagogiska inspirationskonferens(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
High-Temperature Oxidation of Titanium Aluminium Nitride Coatings Visualized by Environmental Transmission Electron Microscopy
2023) European Materials Research Society 2023 Spring Meeting(
- Contribution to conference › Abstract
-
Mark
Machining of Titanium Alloys with a Cemented Carbide Cutting Tools with Tungsten-Based Vacuum-Arc Nitride Coatings
(
- Contribution to journal › Article
-
Mark
Polarisation Development at the European Spallation Source
(
- Contribution to journal › Article
-
Mark
Development and first results of a magnetic sample environment for polarized neutron imaging of thin metal sheets
(
- Contribution to journal › Article
-
Mark
Theoretical investigation of Rare-Earth doped optical materials : Optimization and Prediction
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
First-principles study of luminescence and electronic properties of Ce-doped Y2SiO5
(
- Contribution to journal › Article
-
Mark
Predicting tool life for side milling in C45 E using Colding and Taylor tool life models
(
- Contribution to journal › Article
-
Mark
Advancing Sustainability and Efficiency in Supply Chains : Insights from the Special Issue on Sustainable Supply Chain and Lean Manufacturing
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
On the impact of pad material ingredients on particulate wear emissions from disc brakes
(
- Contribution to journal › Article
-
Mark
Emergence of employee-driven innovation : The dynamic interplay of top-down and bottom-up processes
2023) p.87-106(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Effect of Pretreatment and Temperature on Drying Characteristics and Quality of Green Banana Peel
2023) In AgriEngineering(
- Contribution to journal › Article
-
Mark
A multi-perspective method for gear efficiency and contact analysis
(
- Contribution to journal › Article
-
Mark
A Framework for Intelligent Access and Compliance Assurance for High Capacity Transport
2023) 2022 Conference Proceedings Transport Research Arena, TRA Lisbon 2022 In Transportation Research Procedia 72. p.1272-1279(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Underground capsule pipeline logistic system Feasibility study of an urban application
2023) 2022 Conference Proceedings Transport Research Arena, TRA Lisbon 2022 In Transportation Research Procedia 72. p.3126-3133(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Financing an accelerated shift to zero emission vehicles by deploying High-Capacity Transport with Intelligent Access by 2024
2023) 2022 Conference Proceedings Transport Research Arena, TRA Lisbon 2022 In Transportation Research Procedia 72. p.2660-2667(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
High capacity city transport with intelligent access - A Swedish case study of transporting excavated material
2023) 2022 Conference Proceedings Transport Research Arena, TRA Lisbon 2022 In Transportation Research Procedia 72. p.712-718(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2022
-
Mark
Simulation of thermal and mechanical performance of laser cladded disc brake rotors
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(1). p.3-14(
- Contribution to journal › Article
-
Mark
Tragedy of the facilitated commons: A multiple case study of failure in systematic horizontal logistics collaboration
(
- Contribution to journal › Article
-
Mark
Quantifying differences in alternative food network supply chain activities and their relationship with socio-economic outcomes
(
- Contribution to journal › Article
-
Mark
Linking plant roles and operations strategy decision-making autonomy in international manufacturing networks
(
- Contribution to journal › Article
-
Mark
Optimum dog-leg angle for mass and bearing force optimization of multistage gear reduction
2022) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 236(13). p.2795-2805(
- Contribution to journal › Scientific review
-
Mark
How and Why Freight Trains Deviate from the Timetable : Evidence from Sweden
2022) In IEEE Open Journal of Intelligent Transport Systems(
- Contribution to journal › Article
-
Mark
Sustainability with a Cost Perspective – Driving the Industry to Embrace Sustainable Thinking
(
- Contribution to journal › Article
-
Mark
Structural Changes in Monolayer Cobalt Oxides under Ambient Pressure CO and O2 Studied by In Situ Grazing-Incidence X-ray Absorption Fine Structure Spectroscopy
(
- Contribution to journal › Article
-
Mark
Reversible Electroporation and Post-Electroporation Resting of Thai Basil Leaves Prior to Convective and Vacuum Drying
(
- Contribution to journal › Article
-
Mark
Novel Laboratory-Scale In Situ Methods for Studying Mg Alloy Degradation
2022) Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, 2022 In Minerals, Metals and Materials Series p.253-254(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Induction heating of carbon fibre reinforced polymer composites : Characterization and modelling
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Effects of interatomic potential on fracture behaviour in single- and bicrystalline tungsten
(
- Contribution to journal › Article
-
Mark
Compositional analysis of oxide-embedded III-V nanostructures
(
- Contribution to journal › Article
-
Mark
A Brake System Coefficient of Friction Estimation Using 3D Friction Maps
(
- Contribution to journal › Article
-
Mark
Cost Model for remanufacturing
2022) 10th Swedish Production Symposium (SPS2022) In Advances in Transdisciplinary Engineering 21. p.267-278(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Additive Manufacturing Decision Support Systems : A Systematic Literature Review Discerning Current and Future Directions
2022) 10th Swedish Production Symposium, SPS 2022 In Advances in Transdisciplinary Engineering 21. p.553-565(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Sorting out the sorting in omnichannel retailing
(
- Contribution to journal › Article
-
Mark
The transformation from manual to smart warehousing: An exploratory study with Swedish retailers
(
- Contribution to journal › Article
-
Mark
A resistor network model for analysis of current and temperature distribution in carbon fibre reinforced polymers during induction heating
(
- Contribution to journal › Article
-
Mark
Machinability study on dry machining of white cast iron by polycrystalline cubic boron nitride inserts
(
- Contribution to journal › Article
-
Mark
Inventory control in production–inventory systems with random yield and rework : The unit-tracking approach
(
- Contribution to journal › Article
-
Mark
The ABCDE of supply chain visibility : A systematic literature review and framework
(
- Contribution to journal › Scientific review
-
Mark
Numerical investigation of sequential cuts residual stress considering tool edge radius in machining of AISI 304 stainless steel
(
- Contribution to journal › Article
-
Mark
On the function of lead (Pb) in machining brass alloys
2022) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
-
Mark
Towards Sustainable Manufacturing of Brass Components : Charaterisation, Machinability and Solid-State Recycling of Lead-Free Brass
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Investigation on Resource-Efficient Aluminium Recycling – A State of the Art Review
2022) 10th Swedish Production Symposium (SPS2022) In Advances in Transdisciplinary Engineering 21. p.15-27(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of different PcBN tools when machining superalloy AD730
(
- Contribution to journal › Article
-
Mark
Multicomponent binders for PcBN performance enhancement in cutting tool applications
(
- Contribution to journal › Article
-
Mark
Harmonic structure, a promising microstructure design
(
- Contribution to journal › Article
-
Mark
Global distribution network design: exploration of facility location driven by tax considerations and related cross-country implications
(
- Contribution to journal › Article
-
Mark
Exploring the omnichannel transformation of material-handling configurations and logistics capabilities in grocery retail
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Numerical investigations on residual stresses in orthogonal cutting of Ti-6A1-4V
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of impurity configuration on electronic and optical properties of Ce-doped YVO4 : Semi-local & hybrid functionals
(
- Contribution to journal › Article
-
Mark
Oxygen-sensitive nanoparticles reveal the spatiotemporal dynamics of oxygen reduction during magnesium implant biodegradation
(
- Contribution to journal › Article
-
Mark
Influence of Manufacturing Error Tolerances on Thermal EHL Behavior of Gears
(
- Contribution to journal › Article
-
Mark
Den Svenska Handelslogistik-Panelen: Beslutsfaktorer och effekter för lagerautomation
2022)(
- Book/Report › Report
-
Mark
Formation of Ti2Cu in Ti-Cu Alloys
(
- Contribution to journal › Article
-
Mark
The influence of machining induced surface integrity and residual stress on the fatigue performance of Ti-6Al-4V following polycrystalline diamond and coated cemented carbide milling
(
- Contribution to journal › Article
-
Mark
A case survey of offshoring–backshoring cases : The influence of contingency factors
(
- Contribution to journal › Article
-
Mark
Understanding wear and interaction between CVD α-Al2O3 coated tools, steel, and non-metallic inclusions in machining
(
- Contribution to journal › Article
-
Mark
Airborne Wear Particles from Dry Clutches
(
- Contribution to journal › Article
-
Mark
Influence of sub-surface deformation induced by machining on stress corrosion cracking in lead-free brass
(
- Contribution to journal › Article
-
Mark
Production Costs Calculation Model in Crushing and Screening : Using a technical-economic approach tool for finding the optimal production costs when comparing technical and economical solutions
2022)(
- Thesis › Doctoral thesis (monograph)
-
Mark
Molecular dynamics-based characterisation of early oxide in Fe/Cr alloys
(
- Contribution to journal › Article
-
Mark
“International humanitarian organizations’ perspectives on localization efforts”
(
- Contribution to journal › Article
-
Mark
In situ tempering of martensite during laser powder bed fusion of Fe-0.45C steel
(
- Contribution to journal › Article
-
Mark
Photoelasticity of YVO4 through first-principles calculation
2022) ECCOMAS Congress 2022 - 8th European Congress on Computational Methods in Applied Sciences and Engineering(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Mesoscopic Simulation Approach Based on Metal Fibre Characterization Data to Evaluate Brake Friction Performance
(
- Contribution to journal › Article
-
Mark
A Conceptual Framework for Understanding the Purpose of Change Initiatives
(
- Contribution to journal › Article
-
Mark
Indoor temperature increase at reduced cooling power in light and heavy buildings - measurements in 9 buildings and Monte Carlo simulations of parameters
2022) 17th International Conference on Indoor Air Quality and Climate, INDOOR AIR 2022(
- Contribution to conference › Paper, not in proceeding
-
Mark
Insights into plastic deformation and binder lamella orientation in hardmetal turning inserts
(
- Contribution to journal › Article
-
Mark
Understanding the transformation towards omnichannel logistics in grocery retail: a dynamic capabilities perspective
(
- Contribution to journal › Article
-
Mark
Molecular dynamic modelling of the combined influence from strain rate and temperature at tensile loading of nanosized single crystal Cu beams
(
- Contribution to journal › Article
-
Mark
High-temperature oxidation behaviour of nanostructure surface layered austenitic stainless steel
(
- Contribution to journal › Article
-
Mark
Hard and soft materials: putting consistent van der Waals density functionals to work
(
- Contribution to journal › Article
-
Mark
Reducing scrapping of gears by assessment of tip contact threshold torque
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(8). p.1613-1622(
- Contribution to journal › Article
-
Mark
Separation of XRD peak profiles in single-phase metals with bimodal grain structure to analyze stress partitioning
2022) 42nd Risø International Symposium on Materials Science In IOP Conference Series: Materials Science and Engineering 1249.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Mechanics of accelerated strain hardening in harmonic-structure materials
2022) 42nd Risø International Symposium on Materials Science In IOP Conference Series: Materials Science and Engineering 1249.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machine Learning based Approach for the Prediction of Surface Integrity in Machining
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the influence of varying the crystallographic texture of alumina CVD coatings on cutting performance in steel turning
(
- Contribution to journal › Article
- 2021
-
Mark
Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
Atomistic investigation of functionalized polyethylene-alumina interfacial strength and tensile behaviour
(
- Contribution to journal › Article
-
Mark
Evaluation of tool wear mechanisms and tool performance in machining single-phase tungsten
(
- Contribution to journal › Article
-
Mark
Non-monotonic evolution of surface roughness in a stainless steel during cold deformation
(
- Contribution to journal › Article
-
Mark
A note generalizing “an option mechanism to coordinate a dyadic supply chain bilaterally in a multi-period setting”
(
- Contribution to journal › Article
-
Mark
A finite element analysis (FEA) approach to simulate the coefficient of friction of a brake system starting from material friction characterization
(
- Contribution to journal › Article
-
Mark
Localisation of logistics preparedness in international humanitarian organisations
(
- Contribution to journal › Article
-
Mark
Alignment capabilities of big data’s value creation in the context of service delivery processes
(
- Contribution to journal › Article
-
Mark
A semi-analytical coupled simulation approach for induction heating
(
- Contribution to journal › Article
-
Mark
Historical building renovation and PV optimisation towards NetZEB in Sweden
(
- Contribution to journal › Article
-
Mark
Ab initio modelling of intergranular fracture of nickel containing phosphorus: Interfacial excess properties
(
- Contribution to journal › Article
-
Mark
Input parameters for airborne brake wear emission simulations : A comprehensive review
(
- Contribution to journal › Article
-
Mark
Contrast - a lightweight Python framework for beamline orchestration and data acquisition
(
- Contribution to journal › Article
-
Mark
Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations
(
- Contribution to journal › Article
-
Mark
Evolution of gradient structured layer on AZ91D magnesium alloy and its corrosion behaviour
(
- Contribution to journal › Article
-
Mark
On the steady-state workpiece flow mechanism and force prediction considering piled-up effect and dead metal zone formation
(
- Contribution to journal › Article
-
Mark
Analysis of the temperature distribution in weave-based CFRP during induction heating using a simplified numerical model with a cross-ply representation
(
- Contribution to journal › Article
-
Mark
Thermodynamic modeling framework for prediction of tool wear and tool protection phenomena in machining
(
- Contribution to journal › Article
-
Mark
Mobilities of Ti and Fe in disordered TiFe-BCC assessed from new experimental data
(
- Contribution to journal › Article
-
Mark
Onset of the degradation of CVD α-Al2O3 coating during turning of Ca-treated steels
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining
(
- Contribution to journal › Article
-
Mark
A comprehensive study on cutting mechanisms and surface integrity of AISI 304 when turning a curved surface
(
- Contribution to journal › Article
-
Mark
Laser Cladding Treatment for Refurbishing Disc Brake Rotors : Environmental and Tribological Analysis
(
- Contribution to journal › Article
-
Mark
Operando Reflectance Microscopy on Polycrystalline Surfaces in Thermal Catalysis, Electrocatalysis, and Corrosion
(
- Contribution to journal › Article
-
Mark
Improvement of tool utilization when hard turning with cBN tools at varying process parameters
(
- Contribution to journal › Article
-
Mark
Managing extended supply chains
(
- Contribution to journal › Article
-
Mark
FE analysis on the association between tool edge radius and thermal-mechanical load in machining Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analyzing the Environmental Consequences of Production Processes from a System of Systems Perspective : A Case of Gear Manufacturing in the Automotive Industry
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulation of nanometric cutting using molecular dynamics
2021) In Procedia CIRP(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Surface chemistry and diffusion of trace and alloying elements during in vacuum thermal deoxidation of stainless steel
2021) In Surface and Interface Analysis(
- Contribution to journal › Article
-
Mark
Numerical investigation on the formation mechanism of residual stress in metal cutting
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Tribology and airborne particle emission of laser-cladded fe-based coatings versus non-asbestos organic and low-metallic brake materials
(
- Contribution to journal › Article
-
Mark
The role of microstructural characteristics of additively manufactured Alloy 718 on tool wear in machining
(
- Contribution to journal › Article
-
Mark
Requirements on Supply Chain Visibility : A Case on Inbound Logistics
2021) IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021 In IFIP Advances in Information and Communication Technology 631 IFIP. p.115-122(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Understanding Supply Chain Visibility Through Experts’ Perspective : A Delphi Based Approach
2021) IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021 In IFIP Advances in Information and Communication Technology 633 IFIP. p.189-196(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Multimodal ex vivo methods reveal that Gd-rich corrosion byproducts remain at the implant site of biodegradable Mg-Gd screws
(
- Contribution to journal › Article
-
Mark
Investigation of the influence of tool rake angles on machining of inconel 718
(
- Contribution to journal › Article
-
Mark
The inclusive organisation : Management practices of employee-driven innovation (EDI)
(
- Contribution to journal › Article
-
Mark
Characterisation of worn WC tool using STEM-EDS aided by principal component analysis
(
- Contribution to journal › Article
-
Mark
Numerical modelling of CFRP induction heating using temperature-dependent material properties
(
- Contribution to journal › Article
-
Mark
Machinability of Single-phase Materials : Surface integrity and tool wear analysis
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Tool wear mechanisms of PcBN in machining Inconel 718 : Analysis across multiple length scale
(
- Contribution to journal › Article
-
Mark
Fracture Energy Measurement of Prismatic Plane and Σ2 Boundary in Cemented Carbide
(
- Contribution to journal › Article
-
Mark
Enhancing the Mechanical Properties of Biodegradable Mg Alloys Processed by Warm HPT and Thermal Treatments
(
- Contribution to journal › Article
-
Mark
Fabrication, microstructure, and thermal conductivity of multilayered Cu mesh/AZ31 Mg foil composites
(
- Contribution to journal › Article
-
Mark
Wear mechanisms of PcBN tools when machining AISI 316L
(
- Contribution to journal › Article
-
Mark
Improvement of structural efficiency in metals by the control of topological arrangements in ultrafine and coarse grains
(
- Contribution to journal › Article
-
Mark
An analytical method for continuously predicting mechanics and residual stress in fillet surface turning
(
- Contribution to journal › Article
-
Mark
Managing digital employee-driven innovation : The role of middle-level managers and ambidextrous leadership
2021) p.138-148(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Evolution of magnetic properties during tempering
2021) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
-
Mark
How Blockchain interrelates with trust in the supply chain context : Insights from tracing sustainability in the metal industry
2021) 2021 Hamburg International Conference of Logistics: Advanced Manufacturing; Industry 4.0; Artificial Intelligence; Blockchain; Business Analytics; Innovation Management; Technology Management; Supply Chain Risk Management; Security Management, HICL 2021 In Proceedings of the Hamburg International Conference of Logistics 31. p.329-351(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Gear tolerancing for simultaneous optimization of transmission error and contact pressure
(
- Contribution to journal › Article
-
Mark
International manufacturing relocation - the phenomenon of backshoring
2021)(
- Thesis › Doctoral thesis (compilation)