1 – 250 of 2137
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Thermal energy storage characteristics of finned tubes with different gradients of fin heights
(
- Contribution to journal › Article
-
Mark
Semi-global Chemical Kinetic Mechanism for FAME Combustion Modeling
(
- Contribution to journal › Article
-
Mark
Experimental study on effects of ammonia enrichment on the thermoacoustic instability of lean premixed swirling methane flames
(
- Contribution to journal › Article
-
Mark
Investigation on Thermal and Hydraulic Performances in a Printed Circuit Heat Exchanger with Airfoil and Vortex Generating Fins
(
- Contribution to journal › Article
-
Mark
Improvement in modeling NH3/CH4 combustion based on the effects of the H-abstraction reactions and disproportionation reactions
(
- Contribution to journal › Article
-
Mark
Investigation of Combustion Characteristics of a Fuel Blend Consisting of Methanol and Ignition Improver, Compared to Diesel Fuel and Pure Methanol
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
太陽光発電セクターにおけるサーキュラーエコノミーに向けて―欧州の新たな経験
(
- Contribution to journal › Article
-
Mark
On the right track? Energy use, carbon emissions, and intensities of world rail transportation, 1840–2020
(
- Contribution to journal › Article
-
Mark
Evaluation of closed-loop combustion phase optimization for varying fuel compensation and cylinder balancing in a HD SI-ICE
(
- Contribution to journal › Article
-
Mark
Experimental Investigation of Pilot Injection Strategies to Aid Low Load Compression Ignition of Neat Methanol
2024) 2024 SAE World Congress Experience, WCX 2024(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Assessing single-fuel solutions enabling compression ignition of renewable methanol
2024)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Direct air cooled hollow windings : Performance enhancement of electrically excited machines
2024) 150.(
- Thesis › Doctoral thesis (monograph)
-
Mark
Experimental study of pool boiling performance of Fe3O4 ferromagnetic nanofluid on a copper surface
(
- Contribution to journal › Article
-
Mark
Numerical studies of advanced combustion concepts in hydrogen and methanol compression ignition engines
2024)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Enhanced heat transfer in a two-dimensional serpentine micro-channel using elastic polymers
(
- Contribution to journal › Article
-
Mark
High-pressure homogenizer valve design modifications allowing intensified drop breakup without increasing power consumption. I. Optimization of current design-principle
(
- Contribution to journal › Article
-
Mark
Numerical Modeling of Chemical Kinetics, Spray Dynamics, and Turbulent Combustion towards Sustainable Aviation
(
- Contribution to journal › Article
-
Mark
Scale effect of micro ribs on the turbulent transport in an internal cooling channel
(
- Contribution to journal › Article
-
Mark
Numerical investigation of conjugated heat transfer mechanisms of supercritical hydrogen-helium in PCHE channels
2024) In Numerical Heat Transfer; Part A: Applications(
- Contribution to journal › Article
-
Mark
Development of a novel solar dryer with an incorporated heat exchanger
(
- Contribution to journal › Article
-
Mark
Investigation of a nozzle guide vane cooling characteristic under one engine inoperative conditions
(
- Contribution to journal › Article
-
Mark
Thermal-hydraulic performance of printed circuit heat exchangers with various channel shapes under rolling conditions
(
- Contribution to journal › Article
-
Mark
Part-load thermal efficiency enhancement in gas turbine combined cycles by exhaust gas recirculation
(
- Contribution to journal › Article
-
Mark
Effect of wall curvature on heat transfer and hydrodynamics in a ribbed cooling passage
(
- Contribution to journal › Article
-
Mark
Evaluating the potential benefits of float solar photovoltaics through the water footprint recovery period
(
- Contribution to journal › Article
-
Mark
Heat transfer enhancement with additively manufactured rough surfaces: Insights from large-eddy simulations
(
- Contribution to journal › Article
-
Mark
Effects of horizontal self-rotation on flow and heat transfer of supercritical n-decane in regenerative circular/rectangular cooling channels
(
- Contribution to journal › Article
-
Mark
A comparative study on methanol and n-dodecane spray flames using Large-Eddy Simulation
(
- Contribution to journal › Article
-
Mark
An influence of temperature jump and Navier’s slip-on hybrid nano fluid flow over a permeable stretching/shrinking sheet with heat transfer and inclined MHD
(
- Contribution to journal › Article
-
Mark
Film cooling performance under plasma aerodynamic actuation and spoiler ribs of an internal cooling channel based on Suzen model
2024) In Numerical Heat Transfer; Part A: Applications(
- Contribution to journal › Article
-
Mark
Performance monitoring of kaplan turbine based hydropower plant under variable operating conditions using machine learning approach
(
- Contribution to journal › Article
-
Mark
Sensitivity and resolution response of optical flow-based background-oriented schlieren to speckle patterns
(
- Contribution to journal › Article
-
Mark
Experimental Investigation of Glycerol Derivatives and C1–C4 Alcohols as Gasoline Oxygenates
(
- Contribution to journal › Article
-
Mark
Comparative study and validation of a new analytical method for hydraulic modelling of bidirectional low temperature networks
(
- Contribution to journal › Article
-
Mark
Flow boiling frictional pressure drop inside micro/mini-channels : A new general model and experimental investigation
(
- Contribution to journal › Article
-
Mark
Radiation effect on stagnation point flow of Casson nanofluid past a stretching plate/cylinder
(
- Contribution to journal › Article
-
Mark
An impact of ternary nanofluid on a micropolar fluid with inclined MHD, slip flow and heat transfer
2024) In International Journal of Numerical Methods for Heat and Fluid Flow(
- Contribution to journal › Article
-
Mark
Two-phase flow characteristics and visualization of distributed confined array jet boiling
(
- Contribution to journal › Article
-
Mark
A Pressure-Oscillation-Based RON Estimation Method for Spark Ignition Fuels beyond RON 100
(
- Contribution to journal › Article
-
Mark
Reduced kinetics of NH3/n-heptane : Model analysis and a new small mechanism for engine applications
(
- Contribution to journal › Article
-
Mark
Inorganic Chemistry during Pyrolysis, Gasification, and Oxyfuel Combustion of Kraft Pulping Black Liquor
(
- Contribution to journal › Article
-
Mark
Effect of the sample width and concurrent airflow velocity on heat and mass transfer behaviors in steady flame spread stage
(
- Contribution to journal › Article
-
Mark
Multiphase Flow Dynamics: Insights from Single Microchannels to Porous Media with Uniform and Hierarchical Microchannel Networks
2024)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Modelling the evaporative cooling effect from methanol injection in the intake of internal combustion engines
(
- Contribution to journal › Article
-
Mark
MILD combustion of low calorific value gases
(
- Contribution to journal › Scientific review
-
Mark
Novel MOF-based autonomous humidity control materials for energy-efficient indoor moisture regulation
(
- Contribution to journal › Article
-
Mark
Phase change and combustion of iron particles in premixed CH4/O2/N2 flames
(
- Contribution to journal › Article
-
Mark
Challenges and potentials of using a local heat pump in a 5 GDHC solution : Results from field and laboratory evaluations
(
- Contribution to journal › Article
-
Mark
Application of bipolar membrane electrodialysis for acidification of skim milk. A comprehensive study on process performance and effects on ion-exchange membranes
(
- Contribution to journal › Article
-
Mark
Insight into jet-regeneration composite cooling technology employed in scramjet : Significance of relative positions of two jet holes
(
- Contribution to journal › Article
-
Mark
The sensitivity of pressure-based knock threshold values to alternative fuels : A comparison of methanol vs. gasoline
(
- Contribution to journal › Article
-
Mark
An exploratory study of knock intensity in a large-bore heavy-duty methanol engine
(
- Contribution to journal › Article
-
Mark
Effect of truncated pin-fins on flow and heat transfer characteristics with impinging jets on a concave surface
2024) In Numerical Heat Transfer; Part A: Applications(
- Contribution to journal › Article
-
Mark
Numerical Investigation of Engine Performance and Emission Characteristics of an Ammonia/Hydrogen/n-Heptane Engine Under RCCI Operating Conditions
(
- Contribution to journal › Article
-
Mark
An inverse optimization of turbulent flow and heat transfer for a cooling passage with hierarchically arranged ribs in turbine blades
(
- Contribution to journal › Article
-
Mark
Design and assessment on a bottom-cut shape for latent heat storage tank filled with metal foam
(
- Contribution to journal › Article
-
Mark
Current problems and countermeasures of constructed wetland for wastewater treatment : A review
(
- Contribution to journal › Scientific review
-
Mark
Aryl ether-free polymer electrolytes for electrochemical and energy devices
(
- Contribution to journal › Scientific review
-
Mark
Poly(arylene alkylene)s with Tetrazole Pendants for Alkaline Ion-Solvating Polymer Electrolyte
2024) In ChemSusChem(
- Contribution to journal › Article
-
Mark
The optimal capacity expansion planning for the terminals of the logistics company
(
- Contribution to journal › Article
-
Mark
Performance and emissions of a novel high-pressure direct injection hydrogen dual-fuel engine
(
- Contribution to journal › Article
-
Mark
Experimental and kinetic modelling study on the laminar burning velocities of ultra-lean n-heptane flames at atmospheric pressure
(
- Contribution to journal › Article
-
Mark
Experimental and kinetic modeling study of the laminar burning velocity of CH4/H2 mixtures under oxy-fuel conditions
(
- Contribution to journal › Article
-
Mark
Comparative analysis and optimisation of hydrogen combustion mechanism for laminar burning velocity calculation in combustion engine modelling
(
- Contribution to journal › Article
-
Mark
A new correlation between diluent fraction and laminar burning velocities : Example of CH4, NH3, and CH4 + NH3 flames diluted by N2
(
- Contribution to journal › Article
-
Mark
Effects of secondary hydrogen injection on thermoacoustic instability of swirling premixed flames in a model combustor
(
- Contribution to journal › Article
-
Mark
Volumetric Lagrangian temperature and velocity measurements with thermochromic liquid crystals
(
- Contribution to journal › Article
-
Mark
Novel rotary sliding vane expanders with small eccentricity and guide vane ports : Numerical simulation and structural parameter analysis
(
- Contribution to journal › Article
-
Mark
Effect of fiber curvature on gas diffusion layer two-phase dynamics of proton exchange membrane fuel cells
(
- Contribution to journal › Article
-
Mark
Accurate heat capacity determination of solids and liquids using a heat conduction calorimeter
(
- Contribution to journal › Article
-
Mark
A Generalized Methodology for Health Index Calculation for PMSM Drive System
2024) 12th International Conference on Smart Grid, icSmartGrid 2024 In 12th International Conference on Smart Grid, icSmartGrid 2024 p.777-781(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Assessing the potential of energy sharing through a shallow geothermal heating and cooling network
(
- Contribution to journal › Article
-
Mark
Viscous-dependent fingering dynamics of gas invading into multi-fluids
(
- Contribution to journal › Article
-
Mark
Directly-excited laser-induced thermal grating spectroscopy and thermometry with carbon dioxide vibrational transition
(
- Contribution to journal › Article
-
Mark
Separators and Membranes for Advanced Alkaline Water Electrolysis
(
- Contribution to journal › Scientific review
-
Mark
On heat transfer and thermal management of electrochemical devices
2024) In Advances in Heat Transfer(
- Contribution to journal › Article
-
Mark
The Influence of bipolar plate wettability on performance and durability of a proton exchange membrane fuel cell
2024) In International Journal of Hydrogen Energy(
- Contribution to journal › Article
-
Mark
Alkali metal release in thermochemical conversion of biomass and coal : Optical measurements and modeling
(
- Contribution to journal › Scientific review
- 2023
-
Mark
Rate-Ratio Asymptotic Analysis of Strained Premixed Laminar Methane Flame Under Nonadiabatic Conditions
(
- Contribution to journal › Article
-
Mark
Alkali-stable polybenzimidazole anion exchange membranes tethered with N,N-dimethylpiperidinium cations for dilute aqueous KOH fed water electrolyzers
(
- Contribution to journal › Article
-
Mark
Microstructure in SOFC: electrochemical simulations and experiments
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Evaluation and extension of ignition delay correlations for dual-fuel operation with hydrogen or methanol in a medium speed single cylinder engine
(
- Contribution to journal › Article
-
Mark
Impact of the temperature variation on the thermal conductivity of gas diffusion layers for polymer electrolyte fuel cells
(
- Contribution to journal › Article
-
Mark
Characterisation of distributed combustion of reformed methanol blends in a model gas turbine combustor
(
- Contribution to journal › Article
-
Mark
Turbulent premixed flames in a model gas turbine combustor: fuel sensitivity and flame dynamics
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Principle and performance optimization analysis of a frost-free control for electric vehicle heat pumps
(
- Contribution to journal › Article
-
Mark
Toward Improved Urban Building Energy Modeling Using a Place-Based Approach
(
- Contribution to journal › Article
-
Mark
Combining direct ground cooling with ground-source heat pumps and district heating : Energy and economic analysis
(
- Contribution to journal › Article
-
Mark
Volume expansion and micro-explosion of combusting iron particles analyzed using magnified holographic imaging
(
- Contribution to journal › Article
-
Mark
Application and analysis of flip mechanism in the melting process of a triplex-tube latent heat energy storage unit
(
- Contribution to journal › Article
-
Mark
Experimental study on the pull-down performance of a −80°C cascade refrigeration freezer
(
- Contribution to journal › Article
-
Mark
Numerical simulation of two-phase flow in gas diffusion layer and gas channel of proton exchange membrane fuel cells
(
- Contribution to journal › Article
-
Mark
Deep Neural Network-Based Generation of Planar CH Distribution through Flame Chemiluminescence in Premixed Turbulent Flame
(
- Contribution to journal › Article
-
Mark
Cool flame wave propagation in high-pressure spray flames
(
- Contribution to journal › Article
-
Mark
Design on CO2 capture based on adsorption-absorption integration and energy storage for energy supply buildings with fixed carbon emission
2023) In International Journal of Green Energy(
- Contribution to journal › Article
-
Mark
The effect of short pin fin aspect ratio on thermal characteristics of intermittent impinging jet; An experimental and numerical study
(
- Contribution to journal › Article
-
Mark
Kraft Lignin : A Valuable, Sustainable Resource, Opportunities and Challenges
(
- Contribution to journal › Article
-
Mark
EFFECTS OF ELASTIC PILLARS ON FLUID-FLOW AND HEAT TRANSFER ENHANCEMEN IN A MICRO-CHANNEL
(
- Contribution to journal › Article
-
Mark
Development of air ventilation garments with small fan panels to improve thermal comfort
(
- Contribution to journal › Article
-
Mark
Effects of split diesel injection strategies on combustion, knocking, cyclic variations and emissions of a natural gas-diesel dual fuel medium speed engine
(
- Contribution to journal › Article
-
Mark
Radially graded metal foams arrangement in heat storage device of photothermal utilization systems
(
- Contribution to journal › Article
-
Mark
An exploratory modelling study of chemiluminescence in ammonia-fuelled flames. Part 2
(
- Contribution to journal › Article
-
Mark
Effect of CO2 dilution on structures of premixed syngas/air flames in a gas turbine model combustor
2023) In Combustion and Flame(
- Contribution to journal › Article
-
Mark
Techno-economic analysis and simulation of low temperature district heating networks : A Danish case study with a borehole thermal energy storage
2023)(
- Thesis › Master's thesis
-
Mark
A novel trussed fin-and-elliptical tube heat exchanger with periodic cellular lattice structures
(
- Contribution to journal › Article
-
Mark
A comprehensive experimental and kinetic modeling study of di-isobutylene isomers : Part 2
(
- Contribution to journal › Article
-
Mark
Numerical Study and Experimental Verification of Biomass Conversion and Potassium Release in a 140 kW Entrained Flow Gasifier
(
- Contribution to journal › Article
-
Mark
Effects of wavy ribs on vortex generation and thermal-hydraulic performance in a rotating rectangular channel
(
- Contribution to journal › Article
-
Mark
Zwitterionic poly(terphenylene piperidinium) membranes for vanadium redox flow batteries
(
- Contribution to journal › Article
-
Mark
Numerical Simulation and Optimization of SCR-DeNOx Systems for Coal-Fired Power Plants Based on a CFD Method
(
- Contribution to journal › Article
-
Mark
Effects of Ribbed-Cavity Tip on the Blade Tip Aerothermal Performance in a High Pressure Turbine Stage
(
- Contribution to journal › Article
-
Mark
Numerical Investigation on Flow and Cooling Characteristics of a Micro-Ribbed Vane Endwall
(
- Contribution to journal › Article
-
Mark
Enhanced Temperature Stratification with Deflectors Laid within the Horizontal Water Storage Tank
(
- Contribution to journal › Article
-
Mark
Experimental test on the performance of a −80 °C cascade refrigeration unit using refrigerants R290-R170 for COVID-19 vaccines storage
(
- Contribution to journal › Article
-
Mark
Investigation and optimization on melting performance of a triplex-tube heat storage tank by rotational mechanism
(
- Contribution to journal › Article
-
Mark
Magnetohydrodynamic Marangoni boundary layer flow of nanoparticles with thermal radiation and heat transfer in a porous sheet
(
- Contribution to journal › Article
-
Mark
Multi-Objective Optimization of Convective Heat Transfer for a Composite Internal and Film Cooling Structure
(
- Contribution to journal › Article
-
Mark
CFD modeling of biomass combustion and gasification in fluidized bed reactors
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Flame front visualization in highly turbulent jet flames using CH3 photofragmentation laser-induced fluorescence
(
- Contribution to journal › Article
-
Mark
LES/FGM investigation of ignition and flame structure in a gasoline partially premixed combustion engine
(
- Contribution to journal › Article
-
Mark
A skeletal chemical kinetic mechanism for ammonia/n-heptane combustion
(
- Contribution to journal › Article
-
Mark
Heat Transfer Enhancement of Regenerative Cooling Channel with Pyramid Lattice Sandwich Structures
(
- Contribution to journal › Article
-
Mark
Performance and emissions of a high-speed marine dual-fuel engine operating with methanol-water blends as a fuel
(
- Contribution to journal › Article
-
Mark
Jet array impingement boiling in compact space for high heat flux cooling
(
- Contribution to journal › Article
-
Mark
Fresh and Aged Organic Aerosol Emissions from Renewable Diesel-Like Fuels HVO and RME in a Heavy-Duty Compression Ignition Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Operation performance of an ultralow-temperature cascade refrigeration freezer with environmentally friendly refrigerants R290-R170
(
- Contribution to journal › Article
-
Mark
Multi-scale dynamics for a lean-burn spark ignition natural gas engine under low load conditions
(
- Contribution to journal › Article
-
Mark
Towards sustainable heavy-duty transportation : Combustion and emissions using renewable fuels in a compression ignition engine
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Enhanced film cooling and flow disturbance of an AGTB turbine cascade with plasma aerodynamic actuation at film-holes outlets
(
- Contribution to journal › Article
-
Mark
Numerical simulation of biomass gasification in fluidized bed gasifiers
(
- Contribution to journal › Article
-
Mark
Solar air heater performance enhancement with differently shaped miniature combined with dimple shaped roughness : CFD and experimental analysis
(
- Contribution to journal › Article
-
Mark
Performance optimization of electric vehicle battery thermal management based on the transcritical CO2 system
(
- Contribution to journal › Article
-
Mark
Understanding the effect of Intake temperature on the ϕ-sensitivity of toluene-ethanol reference fuels and neat ethanol
(
- Contribution to journal › Article
-
Mark
Thermodynamic performance in a liquid oxygen tank during active-pressurization under different gas injection temperatures
(
- Contribution to journal › Article
-
Mark
A comprehensive experimental and kinetic modeling study of di-isobutylene isomers : Part 1
(
- Contribution to journal › Article
-
Mark
Transient multiphysics coupled model for multiscale droplet condensation out of moist air
(
- Contribution to journal › Article
-
Mark
Effects of the multicavity tip coolant injection on the blade tip and the over tip casing aerothermal performance in a high-pressure turbine cascade
(
- Contribution to journal › Article
-
Mark
Experimental and kinetic modeling study of laminar burning velocity enhancement by ozone additive in NH3+O2+N2 and NH3+CH4/C2H6/C3H8+air flames
(
- Contribution to journal › Article
-
Mark
From electronic structure to combustion model application for acrolein chemistry Part Ⅱ : Acrolein + HȮ2 reactions and the development of acrolein sub-mechanism
(
- Contribution to journal › Article
-
Mark
Evaluation of combustion properties of vent gases from Li-ion batteries
(
- Contribution to journal › Article
-
Mark
Numerical study on dynamic performance of low temperature recuperator in a S-CO2 Brayton cycle
(
- Contribution to journal › Article
-
Mark
An Economic Assessment of the Terminal Electrification for the Logistics Company
2023) 14th IEEE International Symposium on Power Electronics for Distributed Generation Systems, PEDG 2023 p.716-721(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Mitigation of Heat Transfer Deterioration of Supercritical CO2 Vertical Tube Upward Flows by Introducing Truncated-Ribs in Helical-Like Distribution
(
- Contribution to journal › Article
-
Mark
Numerical study on liquid ammonia direct injection spray characteristics under engine-relevant conditions
(
- Contribution to journal › Article
-
Mark
Detailed modeling of hydrogen release and particle shrinkage during pyrolysis of inhomogeneous wood
(
- Contribution to journal › Article
-
Mark
Mass transfer and modeling of deformed bubbles in square microchannel
(
- Contribution to journal › Article
-
Mark
Effect of phase change heat storage tank with gradient fin structure on solar energy storage : A numerical study
(
- Contribution to journal › Article
-
Mark
Analysis of the fractal characteristics for combustion instability in a premixed natural gas engine
(
- Contribution to journal › Article
-
Mark
Thermomechanical performances of sandwich panels with multi-layer multi-row lightening holes : Comparative study on corrugated-core and X-core
(
- Contribution to journal › Article
-
Mark
Performance evaluation with turbulent flow and heat transfer characteristics in rectangular cooling channels with various novel hierarchical rib schemes
(
- Contribution to journal › Article
-
Mark
Numerical study of heat transfer and load-bearing performances of corrugated sandwich structure with open-cell metal foam
(
- Contribution to journal › Article
-
Mark
Large eddy simulation of combustion recession : Effects of ambient temperature and injection pressure
(
- Contribution to journal › Article
-
Mark
SAFT Regimes and Laminar Burning Velocities : A Comparative Study of NH3+ N2+ O2and CH4+ N2+ O2Flames
(
- Contribution to journal › Article
-
Mark
Experimental and Numerical Analysis of an Active Pre-Chamber Engine Fuelled with Natural Gas
2023) SAE 2023 World Congress Experience, WCX 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Numerical Methodology for the Design of Active Prechambers in Spark-Ignition Engines
2023) In Combustion Science and Technology(
- Contribution to journal › Article
-
Mark
Large-Eddy Simulations of Separated Flow and Heat Transfer in a Ribbed Channel
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Film Cooling in the Cutback for Trailing Edge With Different Incident Angles
(
- Contribution to journal › Article
-
Mark
Adaptive neuro-fuzzy interface system based performance monitoring technique for hydropower plants
(
- Contribution to journal › Article
-
Mark
IoT-Based Dam and Barrage Monitoring System
2023) p.151-162(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Effective monitoring of Pelton turbine based hydropower plants using data-driven approach
(
- Contribution to journal › Article
-
Mark
Solar Energy: Advancements and Challenges
Saini, Gaurav ; Cengiz, Korhan ; Padmanaban, Sanjeevikumar and Kumar, Krishna LU (2023) In Energy Sustainability and Efficiency 1.
- Book/Report › Anthology (editor)
-
Mark
Thermal boundary condition studies in large aspect ratio Rayleigh–Bénard convection
(
- Contribution to journal › Article
-
Mark
Cost-optimal analysis of energy efficient hvac solution-sets for low-energy apartment buildings
(
- Contribution to journal › Article
-
Mark
Measurements of laminar burning velocities and an improved kinetic model of methyl isopropyl ketone
(
- Contribution to journal › Article
-
Mark
CFD Simulation of Biomass Combustion in an Industrial Circulating Fluidized Bed Furnace
(
- Contribution to journal › Article
-
Mark
Thermo-Economic Performance Analysis of Modified Latent Heat Storage System for Residential Heating
(
- Contribution to journal › Article
-
Mark
Optimization of melting performance of a heat storage tank under rotation conditions : Based on taguchi design and response surface method
(
- Contribution to journal › Article
-
Mark
A Review of Isobutanol as a Fuel for Internal Combustion Engines
(
- Contribution to journal › Scientific review
-
Mark
Development of an analytical exponential-6 equation of state through Monte Carlo simulations
(
- Contribution to journal › Article
-
Mark
Quantifying the impact of Covid-19 on the energy consumption in the low-income housing in Greater London
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat and Humidity Transport Analysis Inside a Special Underground Building
(
- Contribution to journal › Article
-
Mark
The Sealing Capacity And Heat Transfer Characteristics Of A Straight-Through Labyrinth Seal With Different Geometric Parameters
(
- Contribution to journal › Article
-
Mark
STUDY OF THE VARIATION IN COMPONENT LEVEL CHARACTERISTICS OF A CENTRIFUGAL COMPRESSOR ACROSS THE COMPRESSOR MAP USING CFD AND EXPERIMENTS WITH DETAILED INSTRUMENTATION ON A GAS STAND
2023) ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, GT 2023 In Proceedings of the ASME Turbo Expo 9.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of pore density and filling ratio of metal foam on melting performance in a heat storage tank
2023) In Numerical Heat Transfer; Part A: Applications(
- Contribution to journal › Article
-
Mark
Progress in phase change nano-emulsions for energy applications-A concise review
(
- Contribution to journal › Scientific review
-
Mark
Design and assessments on graded metal foam in heat storage tank : An experimental and numerical study
(
- Contribution to journal › Article
-
Mark
Experimental study on a -86 °C cascade refrigeration unit with environmental-friendly refrigerants R290-R170
(
- Contribution to journal › Article
-
Mark
Investigation of Interacting Mechanism between Film Cooling and Internal Cooling Structures of Turbine Blade
(
- Contribution to journal › Article
-
Mark
Insight into KOH and KCl release behavior of burning wood and straw pellets using quantitative in situ optical measurements
(
- Contribution to journal › Article
-
Mark
A Framework for Recovering Waste Heat Energy from Food Processing Effluent
(
- Contribution to journal › Article
-
Mark
High-speed optical and laser diagnostics - Internal combustion engines and gas turbine applications
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
An ultralow-temperature cascade refrigeration unit with natural refrigerant pair R290-R170 : Performance evaluation under different ambient and freezing temperatures
(
- Contribution to journal › Article
-
Mark
Experimental Investigation of Glycerol Derivatives as Low-Concentration Additives for Diesel Fuel
2023) SAE 16th International Conference on Engines and Vehicles, ICE 2023(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An experimental and modeling study on the laminar burning velocities of ammonia + oxygen + argon mixtures
(
- Contribution to journal › Article
-
Mark
A review on nanofluid stability : preparation and application
(
- Contribution to journal › Article
-
Mark
Urban farming with rooftop greenhouses : A systematic literature review
(
- Contribution to journal › Scientific review
-
Mark
A study on how efficient measures for secondary district heating system performance can be encouraged by motivational tariffs
(
- Contribution to journal › Article
-
Mark
Data-driven estimation of scalar quantities from planar velocity measurements by deep learning applied to temperature in thermal convection
(
- Contribution to journal › Article
-
Mark
Heat transfer enhancement and flow characteristics of internal cooling channels with slit vortex generators
2023) In Numerical Heat Transfer; Part A: Applications(
- Contribution to journal › Article
-
Mark
District heating and cooling systems transition : Evaluation of current challenges and future possibilities
2023)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Self-Heating in Gate-All-Around Vertical III-V InAs/InGaAs MOSFETs
(
- Contribution to journal › Article
-
Mark
Numerical study on thermal performance of cold plates with leaf type channels for lithium-ion batteries
(
- Contribution to journal › Article
-
Mark
Experimental study on immersion phase change cooling of lithium-ion batteries based on R1233ZD(E)/ethanol mixed refrigerant
(
- Contribution to journal › Article
-
Mark
Validating an advanced smartphone application for thermal advising in cold environments
(
- Contribution to journal › Article
- 2022
-
Mark
Numerical Studies of the Pilot Flame Effect on a Piloted Jet Flame
(
- Contribution to journal › Article
-
Mark
Thermal Performance Analysis in a Zigzag Channel Printed Circuit Heat Exchanger under Different Conditions
(
- Contribution to journal › Article
-
Mark
Rheological behaviour of IoNanofluids based on [emim][DCA] and [emim][TCM]
(
- Contribution to journal › Article
-
Mark
Buoyancy and Thermal Acceleration of Supercritical n-Decane in a Rectangular Channel
(
- Contribution to journal › Article
-
Mark
Investigation on magnetic force and buoyancy force on flow and heat transfer of Al2O3-water nanofluid at various temperature-dependent thermophysical models by a novel PLBM
(
- Contribution to journal › Article
-
Mark
Advancing the understanding of pilot ignition in dual fuel engines : Experimental and conceptual studies
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Conceptual model for the start of combustion timing in the range from RCCI to conventional dual fuel
2022) SAE World Congress Experience, WCX 2022(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of pre-injection on ignition, combustion and emissions of spray under engine-like conditions
(
- Contribution to journal › Article
-
Mark
Fluid sloshing hydrodynamics in a cryogenic fuel storage tank under different order natural frequencies
(
- Contribution to journal › Article
-
Mark
Evaluation of integrated daylighting and electric lighting design projects: Lessons learned from international case studies
(
- Contribution to journal › Article
-
Mark
Heat transfer behaviors of some supercritical fluids : A review
(
- Contribution to journal › Scientific review
-
Mark
Thermal Conductivity of Ionic Liquid-Based Nanofluids Containing Magnesium Oxide and Aluminum Oxide Nanoparticles
(
- Contribution to journal › Article
-
Mark
Thermal effectiveness of solar collector using Graphene nanostructures suspended in ethylene glycol–water mixtures
(
- Contribution to journal › Article
-
Mark
Understanding the characteristics of non-equilibrium alternating current gliding arc discharge in a variety of gas mixtures (air, N2, Ar, Ar/O2, and Ar/CH4) at elevated pressures (1-5 atm)
(
- Contribution to journal › Article
-
Mark
Application of material flow analysis for the assessment of current municipal solid waste management in Karachi, Pakistan
(
- Contribution to journal › Article
-
Mark
Economic and Environmental Potential of Large‐Scale Renewable Synthetic Jet Fuel Production through Integration into a Biomass CHP Plant in Sweden
(
- Contribution to journal › Article
-
Mark
Research status of supercritical aviation kerosene and a convection heat transfer considering thermal pyrolysis
(
- Contribution to journal › Article
-
Mark
Optimization of cooling structures in gas turbines : A review
(
- Contribution to journal › Scientific review
-
Mark
CFD modeling of biomass combustion and gasification in fluidized bed reactors using a distribution kernel method
(
- Contribution to journal › Article
-
Mark
Spark Ignition - Searching for the Optimal Spark Profile
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Review on Thermal Performance of Nanofluids With and Without Magnetic Fields in Heat Exchange Devices
(
- Contribution to journal › Scientific review
-
Mark
Experimental study on the augmented Nusselt number of the endwall through a square-sectioned sharp-turn channel using novel heat exchanger
(
- Contribution to journal › Article
-
Mark
Congress on Research, Development and Innovation in Renewable Energies : Selected Papers from CIDiER 2021
Espinoza-Andaluz, Mayken LU ; Andersson, Martin LU ; Li, Tingshuai ; Villamar, Jordy Santana ; Dávila, Ángel Encalada and Vargas, Ester Melo (2022) Congress on Research, Development, and Innovation in Renewable Energies, CIDiER 2021 In Green Energy and Technology
- Book/Report › Anthology (editor)
-
Mark
An Experimental Investigation of Directly Injected E85 Fuel in a Heavy-Duty Compression Ignition Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of swirler blade angle and actuator applied voltage on combustion characteristics and cooling effectiveness
(
- Contribution to journal › Article
-
Mark
竖直矩形通道内超临界正癸烷振荡特性的大涡模拟
2022) In Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics 54(2). p.281-289(
- Contribution to journal › Article
-
Mark
Experimental evaluation of longitudinal and transverse vortex generators on the endwall of a serpentine passage
(
- Contribution to journal › Article
-
Mark
Indicated efficiency optimization by in-cycle closed-loop combustion control of diesel engines
(
- Contribution to journal › Article
-
Mark
Experimental and numerical study of flow and ignition and lean blowout characteristics of jet-cooled wall flameholder in a dual-mode combustor
(
- Contribution to journal › Article
-
Mark
A model of an integrated hydrothermal liquefaction, gasification and Fischer-Tropsch synthesis process for converting lignocellulosic forest residues into hydrocarbons
(
- Contribution to journal › Article
-
Mark
Comparison of efficiency and emission characteristics in a direct-injection compression ignition engine fuelled with iso-octane and methanol under low temperature combustion conditions
(
- Contribution to journal › Article
-
Mark
Plasma Effects on Swirl Flames in a Scaled Dry Low Emission Burner
2022) In AIAA Journal(
- Contribution to journal › Article
-
Mark
Laser-induced fluorescence for studying the influence of potassium and sodium salts on PAH formation in sooting premixed flames
(
- Contribution to journal › Article
-
Mark
Impact of the Temperature on the Proton Conductivity and Power Output of a PEFC Operating at High Current Densities
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simultaneous measurements of velocity and concentration of gas flow using femtosecond laser-induced chemiluminescence
(
- Contribution to journal › Article
-
Mark
Investigation on thermal performance of electric heaters with nanofluids
(
- Contribution to journal › Article
-
Mark
Experimental study on combustion and flow resistance characteristics of an afterburner with air-cooled bluff-body flameholder
(
- Contribution to journal › Article
-
Mark
Large-eddy simulation of the injection timing effects on the dual-fuel spray flame
(
- Contribution to journal › Article
-
Mark
Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids
(
- Contribution to journal › Article
-
Mark
Application of artificial neural network to forecast engine performance and emissions of a spark ignition engine
(
- Contribution to journal › Article
-
Mark
Experimental study on film cooling performance of a turbine blade tip with a trapezoidal slot cooling scheme in transonic flow using PSP technique
(
- Contribution to journal › Scientific review
-
Mark
Numerical investigations of endwall film cooling design of a turbine vane using four-holes pattern
(
- Contribution to journal › Article
-
Mark
Renewable diesel fuels and emission control strategies : Implications for occupational exposure, human health, and the environment
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
The condensation characteristics of individual droplets during dropwise condensation
(
- Contribution to journal › Article
-
Mark
Development of an empirical test method to quantify the ɸ-sensitivity of liquid fuels
(
- Contribution to journal › Article
-
Mark
Influence of spacing of a delta-winglet vortex generator pair on the flow behavior and heat transfer at the internal tip of gas turbine blades
(
- Contribution to journal › Article
-
Mark
Diffuse back-illumination temperature imaging (DBI-TI), a novel soot thermometry technique
(
- Contribution to journal › Article
-
Mark
Particle emissions from a modern heavy-duty diesel engine as ice nuclei in immersion freezing mode: a laboratory study on fossil and renewable fuels
(
- Contribution to journal › Article
-
Mark
Impact of the COVID-19 pandemic on the energy performance of residential neighborhoods and their occupancy behavior
(
- Contribution to journal › Article
-
Mark
Combining direct ground cooling with ground-source heat pumps and district heating : Borehole sizing and land area requirements
(
- Contribution to journal › Article
-
Mark
Fundamentals and Applications of Hydrogen and Fuel Cells
2022) p.73-101(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Integration of ground-source heat pumps in combined district heating and cooling networks: A holistic modeling framework
2022) European Geothermal Congress(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat exchanger network optimisation considering different shell-side flow arrangements
(
- Contribution to journal › Article
-
Mark
Performance improvement of proton exchange membrane fuel cells with wavy flow channels : An experimental study
(
- Contribution to journal › Article
-
Mark
Nya kärnkraftsreaktorer väcker nya frågor om avfallet
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Thermal and Hydraulic Performances of Carbon and Metallic Oxides-Based Nanomaterials
(
- Contribution to journal › Article